Network Fault definition

Network Fault is defined as: “Any instance where normal electricity supply is off or supply is outside of normal parameters as a result of Network Line or Equipment failure. It is inclusive of network equipment that is in a state that represents a clear hazard to the public.” The Distributor will contract a suitable Service Provider for such fault repairs. The responsibility for provision, operation and payment for such services is at the Distributor’s cost. The Distributor wishes to have a single point of contact for the dispatch of fault calls. Freephone number 0800 LOST POWER is provided for this service (0800 567876). The Distributor will appoint a provider to act as the Distributor’s agent for the dispatch of fault calls to the Accredited Service Provider.
Network Fault means a fault in Chorus' Network that does not relate to a specific Customer. Non-Building Access Point or NBAP means a location, other than End User Premises, Service Provider Premises or Reseller Premises, which may not have a physical address and where either Chorus (End User) Equipment or Chorus (Service Provider) Equipment is (or is to be) installed in order to deliver a Service.
Network Fault responsibility: The Party in whose Network the fault occurs is responsible for rectifying it and restoring services including for the purpose of restoring the supply of Service which are used in another Party’s Network.

Examples of Network Fault in a sentence

  • On Stability of Sustainable Power Systems: Network Fault Response of Transmission Systems with Very High Penetration of Distributed Generation.

  • The proposed Network Fault Management solution must support extensive discovery mechanisms and must easily discover new devices using mechanisms such as SNMP Trap based discovery.

  • Co-Simulation of Smart Distribution Network Fault Management and Reconfiguration with LTE Communication.

  • Family environment and cognitive development: twelve analytic models.

  • Core Network Fault (applicable to Bitstream per VC product only) -complete loss of service on the per VC product.

  • Figure 1 - Network Fault Photographs Once detected and depending upon detection confidence, fault severity and shock risk; business processes are enacted to treat the hazard.

  • The most common areas of research in telecom databases are broadly classified into 3 types, i) Telecom Fraud Detection ii) Telecom Churn Prediction iii) Network Fault Identification and Isolation.

  • A Fault located within the Batelco Network (Batelco Network Fault) or within the Licensed Operator Network ( Licensed Operator Network Fault).

  • The Network Fault Management consoles must provide the topology map view from a single central console.

  • A Fault located within the LIME System (LIME Network Fault) or within theTelcoC&W FixedM S CMUXMUXISLOLTOLTTelco network faultCarrier SystemC&W network faultDFDFTelco System (Telco Network Fault).


More Definitions of Network Fault

Network Fault means a fault in Chorus’ Network that does not relate to a specific Customer.
Network Fault means a fault, error or malfunction of the TransACT Network, which impairs or prevents the provision of the TransACT Services by TransACT Capital; Network Service means:

Related to Network Fault

  • Network User means each natural or legal person having concluded a Standard Transmission Agreement with the TSO for Transmission Services in the Transmission Grid.

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Network Element is As Defined in the Act.

  • Network Load means the load that a Network Customer designates for Network Integration Transmission Service under Tariff, Part III. The Network Customer’s Network Load shall include all load (including losses) served by the output of any Network Resources designated by the Network Customer. A Network Customer may elect to designate less than its total load as Network Load but may not designate only part of the load at a discrete Point of Delivery. Where an Eligible Customer has elected not to designate a particular load at discrete points of delivery as Network Load, the Eligible Customer is responsible for making separate arrangements under Tariff, Part II for any Point-To-Point Transmission Service that may be necessary for such non-designated load.

  • Network Service User means an entity using Network Transmission Service.

  • Common Channel Signaling (“CCS”) is a method of digitally transmitting call set-up and network control data over a digital signaling network fully separate from the public switched telephone network that carries the actual call.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Malicious Software means any software program or code intended to destroy, interfere with, corrupt, or cause undesired effects on program files, data or other information, executable code or application software macros, whether or not its operation is immediate or delayed, and whether the malicious software is introduced wilfully, negligently or without knowledge of its existence.

  • End Users means a Third Party residence or business that subscribes to Telecommunications Services provided by any of the Parties at retail. As used herein, the term “End User(s)” does not include any of the Parties to this Agreement with respect to any item or service obtained under this Agreement.

  • Malware means a form of unauthorized, hostile or intrusive software code or programming instruction(s) intentionally designed to disrupt, disable, harm, monitor, interfere with or otherwise adversely affect computer programs, data files or operations (excluding software keys), including adware, Back Doors, botnets, key loggers, ransomware, rootkits, spyware, Trojan horses, viruses, worms and other types of disabling, harmful, malicious, or unauthorized computer code, files, links, content, scripts, messages, agents, or programs.

  • Network Data Mover (NDM) or “Connect Direct” means the industry standard protocol for transferring information electrically.

  • Network Upgrades means modifications or additions to transmission-related facilities that are integrated with and support the Transmission Provider’s overall Transmission System for the general benefit of all users of such Transmission System. Network Upgrades shall include:

  • InterLATA is As Defined in the Act.

  • Network means the participating providers described in the Provider Directory.

  • End User means, in the event that the Services or Deliverables involve the use of any information systems, any and all UNICEF employees, consultants and other personnel and any other external users collaborating with UNICEF, in each case, authorized by UNICEF to access and use the Services and/or Deliverables.

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • Network Customer means an entity receiving transmission service pursuant to the terms of the Transmission Provider’s Network Integration Transmission Service under Tariff, Part III. Network External Designated Transmission Service:

  • Custom Local Area Signaling Service Features (CLASS Features) means certain Common Channel Signaling based features available to End Users, including: Automatic Call Back; Call Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • BT Network means BT’s public electronic communications network;

  • Application Software means Software formulated to perform specific business or technical functions and interface with the business or technical users of the System and is identified as such in Appendix4 of the Contract Agreement and such other Software as the parties may agree in writing to be Application Software.