Mounting definition

Mounting means the positioning and fastening with proper brackets in the position required.
View Source
Mounting means -----.
View Source
Mounting. Vinyl applies to first surface (exterior face) of glass sidelight with equal spacing to left and right of logo. A maximum of two per entry should be used as illustrated below. If mullion or other architectural feature does not allow for placement at 5'-0" to baseline of logo, place as near to this location as possible, working with the geometry and aestetics of the building entry. Clean glass with ammonia-based window cleaner and allow to dry thoroughly prior to installation. [CHART OMITTED] 6a CarrAmerica ▇▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇ [Illegible]n Standards Exterior Logo Plaque - Bronze Product: 7.1/2" by 7 1/2" by 1/8" thick bronze plaque with [Illegible]-etched graphics and 45" beveled edge.
View Source

Examples of Mounting in a sentence

  • Mounting space on the bay, including space for the fuse panel and air gaps necessary for heat dissipation, is limited to seventy-eight (78) inches.

  • Mounting space on the bay, including space for the fuse panel and air gaps necessary for heat dissipation is limited to 78 inches.

  • Electrical EEC Harnesses - Fan and Core, Nose Spinner, PART - Drains, If Intertwined With Engine parts, Airframe Accessory Mounting Pads and Drives, PART - Brackets on Working Flanges for attachment of Aircraft Equipment and EBU, PART - IDG Piping, where Intertwined with Engine Parts.

  • Mounting products contained in Trinamount I, Trinamount II and Trinamount 3 D10.

  • Mounting space on the bay, including space for the fuse panel and air gaps necessary for heat dissipation, is limited to 78 inches.

  • Mounting system shall use EPDM rubber or equivalent to isolate the module from the mounting structure.

  • Vertical angles: Upward angle 5° Mounting height of the sensor (centre of sensor aperture above the ground) Less than 2 m Between 1.5 m and 2.5 m Greater than 2.0 m Downward angle 2° 2° to 5° 5° These angles are measured from the centre of the sensor aperture relative to a horizontal straight line through its centre and parallel to the longitudinal median plane of the vehicle.

  • Mounting location shall be such that a person may approach within 3 inches of signage without encountering protruding objects or standing within the swing of a door.

  • Mounting plates for non-standard fifth wheel couplings which are unsuitable for positive steering shall be marked appropriately.

  • Mounting products contained in Trinamount I, Trinamount II and Trinamount III.


More Definitions of Mounting

Mounting recommendation Near a window sill or ledge favoring the CDMA system. Desk mount Yes Integral feet. Wall mount Yes Integral Mounting Tabs.
View Source
Mounting means the positioning and fastening with proper brackets in the position required. Local displays and readouts shall be positioned for easy reading, without the use of ladders, by operators.
View Source
Mounting. All individual letters shall be raceway mounted on a metal raceway not to exceed 6" high and 6" deep. No visible fasteners to be allowed. Raceway shall be primed and painted with an automotive grade acrylic enamel color to Landlord's specifications.
View Source

Related to Mounting

  • apron means a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

  • Motorized wheelchair means any self-propelled vehicle designed for, and used by, a handicapped person and that is incapable of a speed in excess of eight miles per hour.

  • Wheel means a complete wheel consisting of a rim and a wheel disc;

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.