Most Likely definition

Most Likely buy another ticket on United or United Express.
Most Likely. ’ has arrived. It means ‘‘most probable.’’ his ideas on the absolute criterion, on invariance to
Most Likely case and “reasonable worst” case estimates for investigating and remediating the Recognized Environmental Conditions.

Examples of Most Likely in a sentence

  • NAHC will immediately identify the person or persons determined to be the Most Likely Descendent (MLD) and provide contact information.

  • The Worst Case Scenario assumes a 5 percent increase to the Most Likely MEAC case scenario.

  • Upon determination by the County Coroner that the find is Native American in origin, the Native American Heritage Commission will assign the Most Likely Descendant(s) who will work with the project proponent to define appropriate treatment and disposition of the burials.

  • The Most Likely MEAC reflects the EAC including management reserve.

  • The NAHC shall then identify the person(s) thought to be the Most Likely Descendent (MLD).

  • If the remains are determined to be prehistoric, the Coroner will notify the Native American Heritage Commission (NAHC), which will determine and notify a Most Likely Descendant (MLD).

  • Worst case scenario assumes a 5% increase to the Most Likely case scenario.

  • The NAHC is responsible for identifying and immediately notifying the Most Likely Descendant (MLD) from the Amah Mutsun Tribal Band.

  • The Significance Testing Plan shall be prepared by the project archaeologist(s), in consultation with the Native American monitor(s), and the Most Likely Descendent (MLD) when State Law mandates identification of a MLD.

  • Brian Headd, “Small Businesses Most Likely to Lead Economic Recovery,” The Small Business Advocate, vol.


More Definitions of Most Likely

Most Likely br." means broché (stapled).
Most Likely value. This means that the PERT distribution is implicitly conservative (ie. optimistic) in determining the likely final cost outcome. This implicit conservatism provides the appropriate driver to ensure that prudent project management and control is applied to mitigate cost overrun, and is therefore an appropriate distribution to apply to ElectraNet’s regulatory situation.

Related to Most Likely

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Innovative control technology means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or non-air quality environmental impacts.

  • Least developed country end product means an article that—

  • Internal combustion engine or "Engine" means an energy converter, other than a gas turbine, designed to transform chemical energy (input) into mechanical energy (output) with an internal combustion process; it includes, where they have been installed, the emission control system and the communication interface (hardware and messages) between the engine's electronic control unit(s) and any other powertrain or category T vehicle or non-road mobile machinery control unit necessary to comply with this Regulation;

  • Collective Consultation Period means any period when both (i) the Aggregate Certificate Balance of the Class E Certificates, as notionally reduced by any Appraisal Reductions allocable to such Class in accordance with Section 6.9, is less than 25% of the initial Aggregate Certificate Balance of the Class E Certificates and (ii) the Aggregate Certificate Balance of the Class E Certificates, without regard to any Appraisal Reductions allocable to such Class in accordance with Section 6.9, is at least 25% of the initial Aggregate Certificate Balance of the Class E Certificates.

  • Post-consumer recovered material means any product used by a consumer, including a business that purchases the material, that has served its intended end use, and that has been separated or diverted from the solid waste stream for the purpose of use, reuse, or recycling.

  • Cost outlier means services provided during a single visit that have an extraordinarily high cost as established in paragraph “g” and are therefore eligible for additional payments above and beyond the base APC payment.

  • Company IP Contract means any Contract to which the Company is a party or by which the Company is bound, that contains any assignment or license of, or covenant not to assert or enforce, any Intellectual Property Right or that otherwise relates to any Company IP or any Intellectual Property developed by, with, or for the Company.

  • Scheduled Commercial Operation Date shall have the meaning ascribed to it in Clause 5.4.1;

  • Source material milling means any activity that results in the production of byproduct material as defined by definition (2) of byproduct material.

  • Qualified high-technology business means a business that is either of the following:

  • Tobacco product means any substance containing tobacco leaf, including but not limited to, cigarettes, cigars, pipe tobacco, hookah tobacco, snuff, chewing tobacco, dipping tobacco, bidis, blunts, clove cigarettes, or any other preparation of tobacco; and any product or formulation of matter containing biologically active amounts of nicotine that is manufactured, sold, offered for sale, or otherwise distributed with the expectation that the product or matter will be introduced into the human body by inhalation; but does not include any cessation product specifically approved by the U.S. Food and Drug Administration for use in treating nicotine or tobacco dependence.

  • Tobacco products means cigars, cigarettes, cheroots, stogies, periques, granulated, plug cut, crimp cut, ready rubbed, and other smoking tobacco, snuff, snuff flour, moist snuff, cavendish, ping and twist tobacco, fine-cut and other chewing tobaccos, shorts, refuse scraps, clippings, cuttings and sweepings of tobacco, and other kinds and forms of tobacco, prepared in such manner as to be suitable for chewing or smoking in a pipe or otherwise, or both for chewing and smoking.

  • Bid with Lowest Evaluated Cost means the bid quoting lowest cost amongst all those bids evaluated to be substantially responsive;

  • Sole source procurement means a procurement without competition pursuant to a determination under Subsection 63G-6a-802(1)(a) that there is only one source for the procurement item.

  • Regulatory Floodway means the channel of a river or other watercourse and the adjacent land areas that must be reserved in order to discharge the base flood without cumulatively increasing the water surface elevation more than a designated height.

  • Determination Business Day means a day (other than a Saturday or Sunday) on which commercial banks are open for general business (including dealings in foreign exchange) in Hong Kong, London and New York City;

  • Price Source Disruption means (a) the failure of the Price Source to announce or publish the Reference Price (or the information necessary for determining the Reference Price); or (b) the temporary or permanent discontinuance or unavailability of the Price Source.

  • Tobacco product manufacturer means an entity that after the date of enactment of this Act directly (and not exclusively through any affiliate):

  • Valuation Business Day means, with respect to each Reference Currency, any day, other than a Saturday or Sunday, that is neither a legal holiday nor a day on which commercial banks are authorized or required by law, regulation or executive order to close (including for dealings in foreign exchange in accordance with the practice of the foreign exchange market) in the city or jurisdiction indicated in the table below:

  • Scheduled Commercial Bank means any bank included in the second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934).

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • material hoist means a hoist used to lower or raise material and equipment, excluding passengers; "medical certificate of fitness" means a certificate contemplated in regulation 7(8);

  • Expected week of childbirth means the week, starting on a Sunday, during which the mother's doctor or midwife expects her to give birth.