Mixing operation definition

Mixing operation means the operation of combining two or more ingredients, of which at least one is a grain.
Sample 1Sample 2Sample 3

Examples of Mixing operation in a sentence

  • Outdoor storage related to the Topsoil and Aggregate Mixing operation shall not exceed an area and volume of fifty (50) feet by fifty (50) feet by fifty (50) feet, per raw material (e.g. topsoil, gravel, etc.) and shall only be permitted in the area denoted on the site plan “top soil screen area” and “parking and material storage”.

  • Fuel Rodlet Design DataDesign ParameterAFC-2AAFC-2BAFC-2CAFC-2DCladding Material The experimental capsules containing the AFC-2 fuel rodlets are inserted into ATR inside cadmium baskets that filter the thermal flux, producing a somewhat hardened neutron spectrum in the test region.

  • I6II7II8IM1 +M2 + M3 +M4 +M5++M6M7+I : Input operation+N: Definition operation : Mixing operation Figure 5: Dataflow graph with input and mix operations.needed for the schedule.

  • One (1) Rubber Mixing operation, with a combined maximum throughput rate of 1,350 pounds of EPDM Sulfur Cure per hour, which is the main rubber compound processed at this location and controlled by one (1) baghouse.

  • Outdoor commercial display related to the Topsoil and Aggregate Mixing operation shall not exceed an area and volume of six (6) feet by six (6) feet by six (6) feet in total and shall only be permitted in development area A, as denoted on the site plan.

  • Meat employees may perform work outside the department: such alternative duties will be by mutual agreement.

  • Without any support for the newly alleged Home Office Overhead mark-up, the ODRA finds that the JV has failed in its burden to demonstrate that such a mark-up is appropriate in its equitable adjustment.

  • Mixing operation shall be performed in such a manner as to produce a uniform mixture of stabilizing emulsion and DG.

  • Mixing operation runs for approximately 4hrs/day with operations being 5 days/week.

  • As far as industrial waste treatment is concerned, it is necessary to pay close attention to the Mixing operation, that is a commonly used treatment, especially in order to respect the “not dilution rule” of article 5 of LFD.

Related to Mixing operation

  • Farming operation means raising, cultivating, propagating, fattening, grazing, or any other farming, livestock, or aquacultural operation.

  • Animal feeding operation (“AFO”) means a lot or facility (other than an aquatic animal production facility) where animals have been, are, or will be stabled or confined and fed or maintained for a total of 45 days or more in any 12-month period, and crops, vegetation, forage growth, or post-harvest residues are not sustained in the normal growing season over any portion of the lot or facility [40 CFR § 122.23(b)(1)].

  • Mining operation means any operations undertaken for the purpose of winning any mineral as defined in section 3 (d) of Mines and Minerals (Development and Regulation) Act, 1957.

  • Drilling operations means the drilling of an oil and gas well and the production and completion operations ensuing from the drilling which require entry upon the surface estate and which were commenced after June 30, 1979, and oil and gas geophysical and seismograph exploration activities commenced after June 30, 1983.

  • blending operation means actions supported by the EU budget, including within blending facilities pursuant to Article 2(6) of the Financial Regulation, combining non-repayable forms of support and/or financial instruments from the EU budget with repayable forms of support from development or other public finance institutions, as well as from commercial finance institutions and investors.

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • Mining Operations means every kind of work done by the Operator:

  • Salvage operation means any business, trade or industry engaged in whole or in part in salvaging or reclaiming any product or material, including but not limited to metals, chemicals, shipping containers or drums.

  • Production Operations means all operations conducted for the purpose of producing Petroleum from the Development Area after the commencement of production from the Development Area including the operation and maintenance of all necessary facilities therefor.

  • The Works/Project means the works to be executed or done under this contract.

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Unit operating hour or "hour of unit operation" means an hour in which a unit combusts any fuel.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Railway Operation means the construction and operation under this Agreement of the relevant Railway and associated access roads and Additional Infrastructure (if any) within the relevant Railway Corridor and of the associated Lateral Access Roads, in accordance with approved proposals;

  • Joint Operations means those operations and activities carried out by Operator pursuant to this Agreement, the costs of which are chargeable to all Parties.

  • Farm operation means any activity conducted solely or primarily for the production of one or more agricultural products or commodities, including timber, for sale or home use, and customarily producing such products or commodities in sufficient quantity to be capable of contributing materially to the operator's support.

  • Project means the goods or Services described in the Signature Document or a Work Order of this Contract.

  • In operation means engaged in activity related to the primary design function of the source.

  • Postproduction means an activity related to the finishing or duplication of a medium described in Subsection 59-12-104(54)(a).

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Branch operations means any business operations of a branch captive insurance company in this State.

  • Mixing zone means a limited area of a surface water body or aquifer where initial dilution of a discharge takes place and where certain water quality standards may be exceeded.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Business operations means engaging in commerce in any form, including by acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.