Mechanical alteration definition

Mechanical alteration or "mechanical lift" means modification or alteration of the axles, chassis, suspension, or body by any means, including tires and wheels, and excluding any load, which affects the frame height of the motor vehicle.
Sample 1Sample 2Sample 3

Examples of Mechanical alteration in a sentence

  • Mechanical alteration may be in some instances the most economical method to correct conducive conditions.

  • Dr. Uliana Ognysta, National Academy of Science of Ukraine, Kiev, Ukraine, 19.

  • Provide all engineering, layouts, drawings, calculations, and permits that may be re- quired by the State of Colorado – State Architect and/or City of Lakewood, Jefferson County, or Lakewood Fire Department, as related to the Electrical, Fire Protection, Fire Suppression, Structural, and Mechanical alteration or interface work.

  • Provide all engineering, layouts, drawings, calculations, and permits that may be re- quired by the City/County of Denver Fire Department, as related to changing the Type of Hoist Machine, Drive and Control System, as well as changes to the Electrical, Fire Protection, Fire Suppression, Structural, and Mechanical alteration or interface work.

  • Mechanical alteration may be in some instances the m ost economical method to correct conditions that are conducive to wood-destroying insects.

  • Provide all engineering, layouts, drawings, calculations, and permits that may be re- quired by the State of Colorado – State Architect and/or City of Lakewood, Jefferson County, or Lakewood Fire Department, as related to the Electrical, Fire Protection, Structural, and Mechanical alteration or interface work.

  • If you are unsure about your duties and the legal requirements in relation to investments, you need to undertake relevant trustee training and/or obtain appropriate legal advice.

  • Mechanical alteration may be in some instances the most economical method to correct conditions that are conducive to wood-destroying insects.

  • Mechanical alteration is the action of grinding or chipping materials into smaller pieces which, in the case of lignocellulosic biomass, disrupts the biomass structure and increases surface area.

  • Mechanical alteration is not usually necessary with this type of construction.

Related to Mechanical alteration

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Substantial alteration means an alteration that has a major impact on the architectural features, characteristics, appearance, or integrity of a structure or lot. The term does not include routine maintenance that is reasonably necessary to maintain a dealership facility in attractive condition and does not include any changes to items protected by federal intellectual property rights.

  • Major Alteration means change other than repair or replacement of building materials or equipment with materials and equipment of a similar type.

  • Installation Works means, as the context so requires,

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Material Alteration shall have the meaning set forth in Section 4.1.11.

  • Tenant Improvements Defined in Exhibit B, if any.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.

  • Excavation work means the making of any man-made cavity, trench, pit or depression formed by cutting, digging or scooping;

  • Tenant Work All work installed or furnished to the Premises by Tenant in connection with Tenant’s initial occupancy pursuant to Rider 2 and the Workletter.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Construction Work means any work in connection with⎯

  • Electrical work Concealed and fire resistant wiring of “ISI” Copper Wire, Distribution board with “MCB”. “ISI” xxxx modular electrical accessories, Landline phone conduit, Cable TV wiring conduit, Separate line for inverter connection, Air-conditioner power point. Painting : Long Lasting and weather resistant acrylic paint to all external walls, All internal walls with white cement based putty finish with OBD. Plumbing & Sanitation : Sanitary xxxx for toilets, plumbing fixtures, CPVC/UPVC pipe and fitting(ISI make), SWR drainage system. Kitchen: Granite platform, ceramic tiles dado upto 2’ height, Stainless Steel sink in Kitchen, Aquaguard point, Connection for washing machine in wash area.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Installation Site means the site at which the Product is originally installed.

  • Base Building Work means the base building work for the Building as described in this Manual.

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Leasehold Improvements means all buildings, structures, improvements and fixtures located on any Leased Real Property which are owned by Company or any Company Subsidiary, regardless of whether title to such buildings, structures, improvements or fixtures are subject to reversion to the landlord or other third party upon the expiration or termination of the lease for such Leased Real Property.

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).

  • Tenant’s Work means all improvements, alterations, fixture, equipment, and signage installation, and furniture placement necessary or appropriate for the conduct of the Permitted Use, including all work described as Tenant’s Work on Exhibit D, attached (the “Work Letter”).