Measurement protocol definition

Measurement protocol. ’ means the methodology,
Sample 1Sample 2Sample 3
Measurement protocol means a procedure or method used, con- sistent with industry standards, to establish with reasonable certain- ty the amount of energy savings that will result from the installation of a conservation measure. Industry standards include a range of ap- propriate protocols reflecting a balancing of cost and accuracy, such as the application of a deemed savings value established through in- dustry processes for a measure that has broad application and uniform characteristics and the use of engineering calculations, metering, utility billing analysis, and computer simulation for a measure in- stalled as part of a customer-specific project.
Sample 1Sample 2Sample 3
Measurement protocol means a procedure or method used, consistent with industry standards, to establish with reasonable certainty the amount of energy savings that will result from the installation of a conservation measure. Industry standards include a range of appropriate protocols reflecting a balancing of cost and accuracy, such as the appli- cation of a deemed savings value established through indus- try processes for a measure that has broad application and uniform characteristics and the use of engineering calcula- tions, metering, utility billing analysis, and computer simula- tion for a measure installed as part of a customer-specific project.
Sample 1Sample 2

Examples of Measurement protocol in a sentence

  • Measurement protocol of the Total Aural Disconsonance figure of merit……...

  • Figure 3 – Measurement protocol of antenna patterns in the azimuthal plan Acquisitions of the RCS were made with two different configurations of activation of the transmit antenna: Tx2 only and 3Tx together.

  • Measurement protocol for analyzing sensing depth with double-layered sample configuration.

  • Measurement protocol The comparison protocol is summarized in this section.

  • He also recorded statement of accused Arun Das and arrested him and forwarded him to court.

  • Measurement protocol On the examination day, participants were not allowed to take any muscle relaxants or antispastic medication that may interfere with the test [20].

  • Measurement protocol Three IMUs (MTw xSens, Netherlands, 100 samples s−1), em- bedding a tri-axial accelerometer (± 16 g) and a tri-axial gyro- scope (± 2000 deg/s), were used and positioned on the lower trunk (L4/L5 level) and on both shanks (laterally, below the tibial tuberosity level) of each participant (Fig.

  • Measurement protocol of the vocal loading task in the vocal fatigue study.

  • But then, he decides to rest under a tree for a while and falls asleep.

  • The USB interface of the S87230 series USB CW power sensor conforms to the USBTMC (USB Test and Measurement) protocol, which is a kind of enumerated equipment (namely, it can be found through the viFindRsrc function of the VISA library).


More Definitions of Measurement protocol

Measurement protocol means a procedure or method used, consistent with industry standards, to establish
Sample 1

Related to Measurement protocol

  • Step therapy protocol means a protocol or program that establishes the specific

  • Protocol means, in respect of any category of object and associated rights to which this Convention applies, the Protocol in respect of that category of object and associated rights;

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • ASAM criteria means the most current edition of the American Society of Addiction Medicine's published criteria for admission to treatment, continued services, and discharge.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • ERCOT Protocols means the document adopted by ERCOT, including any attachments or exhibits referenced in that document, as amended from time to time, that contains the scheduling, operating, planning, reliability, and settlement (including customer registration) policies, rules, guidelines, procedures, standards, and criteria of ERCOT. For the purposes of determining responsibilities and rights at a given time, the ERCOT Protocols, as amended in accordance with the change procedure(s) described in the ERCOT Protocols, in effect at the time of the performance or non-performance of an action, shall govern with respect to that action.

  • Fitch Criteria means the Collateral Amount shall equal the sum of (i) the product of A multiplied by the xxxx-to-market value of the outstanding Transactions determined by Party A in good faith from time to time, and (ii) the product of B multiplied by the current aggregate notional amount of the outstanding Transactions, where:

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Performance evaluation means evaluation of work and program participation as well as other areas of behavior.

  • Goal means the intended or projected result of a comprehensive corrections plan or community corrections program to reduce prison commitment rates, to reduce the length of stay in a jail, or to improve the utilization of a jail.

  • Earned value management system means an earned value management system that complies with the earned value management system guidelines in the ANSI/EIA-748.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Evaluation Criteria means the criteria set out under the clause 27 (Evaluation Process) of this Part C, which includes the Qualifying Criteria, Functional Criteria and Price and Preferential Points Assessment.

  • Benchmarks mean the performance milestones that are set forth in Appendix D.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Extreme performance coating means coatings designed for harsh exposure or extreme environmental conditions.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Performance Standards or “PS” shall mean the cleanup levels and other measures of achievement of the remedial action objectives, as set forth in the ROD.

  • Baseline data means information gathered at a selected point in time and used thereafter as a basis from which to monitor change.

  • Performance Standard means the acceptable range of performance for a Performance Indicator or a Service Volume that results when a Performance Corridor is applied to a Performance Target.

  • Protocol Number 1002-048 Protocol Title: A Randomized, Double-Blind, Placebo-Controlled, Parallel Group, Multicenter Study to Evaluate the Efficacy and Safety of Bempedoic Acid (ETC-1002) 180 mg/day as Add-on to Ezetimibe Therapy in Patients with Elevated LDL-C Protocol Date: 18 January 2017 Sponsor: Esperion Therapeutics, Inc. Country where Institution is Conducting Study Czech Republic Location where the study will be conducted: Kardiologická ambulance, which is a division/part of the Institution Key Enrollment Date: 100 Calendar Days after Site Initiation Visit (being the date by which Site must enrol at least one (1) subject as more specifically set out in section 1.7 “Key Enrollment Date” below) ECMT / EC / RA ECMT: Ethics Committee Fakultni nemocnice v Motole V Uvalu 84 150 06 Xxxxx 0 Xxxxx Xxxxxxxx; Mgr. xxxxxxxxxxxxx Etická komise Nemocnice Havlíčkův Brod Husova 2624 580 22 Havlíčkův Brod RA: State Institute for Drug Control, Xxxxxxxxx 00, 000 00 Xxxxx 00 Xxxxx Xxxxxxxx Investigator name, (the “Investigator”) xxxxxxxxxxxxx Číslo Protokolu: 1002-048 Název Protokolu: Randomizované, dvojitě zaslepené, placebem kontrolované multicentrické klinické hodnocení, s paralelními skupinami, posuzující účinnost a bezpečnost kyseliny bempedové (ETC 1002) 180 mg denně jako doplňku k léčbě ezetimibem u pacientů se zvýšenou hladinou LDL-C Datum Protokolu: 18. 1. 2017 Zadavatel: Esperion Therapeutics, Inc. Stát, ve kterém má sídlo Zdravotnické zařízení, které provádí Studii Česká republika Místo, kde bude prováděna Studie: Kardiologická ambulance, která je součástí/oddělením Zdravotnického zařízení Klíčové datum zařazení: 100 kalendářních dnů po Iniciační návštěvě Místa provádění klinického hodnocení (a to jakožto den, ke kterému je Místo provádění klinického hodnocení povinno zařadit minimálně jeden (1) subjekt, jak je dále podrobněji rozvedeno níže v odstavci 1.7 “Klíčové datum zařazení”) MEK / EK / SÚKL MEK: Etická komise Fakultní nemocnice v Motole V Úvalu 84 150 06 Xxxxx 0 Xxxxx xxxxxxxxx; xxxxxxxxxxxxx Etická komise Nemocnice Havlíčkův Brod Husova 2624 580 22 Havlíčkův Brod SÚKL: Státní ústav pro kontrolu léčiv, Šrobárova 48, 100 41 Xxxxx 00 Xxxxx xxxxxxxxx Jméno zkoušejícího, ( “Zkoušející”) xxxxxxxxxxxxx The following additional definitions shall apply to this Agreement: Ve Smlouvě jsou použity následující smluvní definice: