Maximum design capacity definition

Maximum design capacity means, in reference to a source operation, its maximum capability, per period of time, to operate, to consume a process input or to generate a product. This term may be expressed in units such as the maximum number of kilowatt-hours of electricity that a combustion unit is capable of producing per hour or the maximum amount of a raw material that may be processed per day.
Sample 1Sample 2Sample 3
Maximum design capacity means the maximum operational capacity for an emission unit.
Sample 1
Maximum design capacity means the nameplate capacity less any restrictions on the device due to operational design.
Sample 1

Examples of Maximum design capacity in a sentence

  • Maximum design capacity for Tenant’s electrical system = 32 va/sq ft All Tenant telephone equipment shall be located within Tenant’s premises.

  • PLUMBING Plumbing services listed below are available for the following spaces: MC-1A and MC-2 Gas is not available Water Connection 1” Sewer Connection 3” Vent Connection 2” ELECTRICAL Maximum design capacity for Tenant’s electrical system: Space MC-1: 12 va/sq.

  • Maximum design capacity of mineral mining and processing plant (tons/hr):3.

  • Maximum design capacity is defined as the number of offenders a facility’s dining, medical, and program space, supporting infrastructure and equipment are intended to accommodate.

  • Maximum design capacity for Tenant’s electrical system: Space MC-6, MC-11, MC-17, MC-30, MC-73 = 45 va/sq ft Spaces MC-15, MC-31 = 75 va/sq ft All other spaces = 16 va/sq.

  • These municipalities often send only a single delegate, thus a mayor.

  • Maximum design capacity for Tenant’s electrical system = 16 va/sq ft Landlord provides a main electrical panel in the vicinity of the Ticket Windows.

  • PLUMBING Gas is available on request 2200 CFH @ 8”wc Gas Connection 4” Water Connection 2” Sewer Connection 4” Vent Connection 3” ELECTRICAL Maximum design capacity for each tenant’s electrical system for Tenant’s lights and equipment (277/480V, 3-ph, 4 wire) = 32 va/sq ft Landlord shall provide an empty raceway from Landlord’s electric room to Tenant’s premises.

  • Maximum design capacity for Tenant’s electrical system = 12 va/sq ft All Tenant telephone equipment shall be located within Tenant’s premises.

  • ZZZZNational Emissions Standards for Hazardous Air Pollutants for Stationary Reciprocating Internal Combustion Engines (RICE)• Spark ignition;• At an area source;• Maximum design capacity of 100 (< 500 hp);• Emergency; and• construction commenced before June 12, 2006 (existing).*Location of the requirement in the permit (e.g., EQUI 1, STRU 2, etc.).

Related to Maximum design capacity

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Maximum Demand means the greatest demand required by a customer during a specific length of time.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Design flow means the average annual flow or average daily flow specified in an approved facilities plan or approved plans and specifications, the flow specified in a WPDES permit, or the flow required to meet performance standards.

  • Maximum mass means the maximum mass stated by the vehicle manufacturer to be technically permissible (this mass may be higher than the "permissible maximum mass" laid down by the national administration).

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.