Line voltage definition

Line voltage means the voltage provided to the trolleybus from the external power supply.
Line voltage means the voltage provided to the trolleybus from the external power supply. Trolleybuses shall be designed to operate at a rated line voltage of either:
Line voltage. Outdoor: 208-240 Vac, 50 to 60 Hz, single phase. Indoor: The Indoor version of the BTS must support both DC and AC power supplies as follows: DC: +25V to + 28V at Minicell input. AC: 110-220 Vac, 50 to 60 Hz, single phase (This will be input to the power cabinet and the power cabinet will provide the required DC input to the Minicell).

Examples of Line voltage in a sentence

  • Ensure the termination of the flash interval after at least 6 seconds if the Watchdog input has made 5 transitions between the True and False state and the AC Line voltage is greater than the “restore” level.

  • Ensure the external remote reset input does not reset configuration change faults.Ensure the conflict monitor will trigger and the AC Power indicator will flash at a rate of 2 Hz ± 20% with a 50% duty cycle when the AC Line voltage falls below the “drop-out” level.

  • Ensure the conflict monitor will resume normal operation when the AC Line voltage returns above the “restore” level.

  • If the service is taken by the Customer at the Customer’s property line and at the Company’s Primary Line voltage of 11,500 volts or 12,500 volts, and the Customer supplies and maintains all high tension and transforming equipment installed on the Customer’s Premise, $0.72 per kW of monthly Billing Demand will be deducted from the monthly Demand Charge.

  • The electric equipment, structures, land and land rights, including transformers, switches, protective devices and other apparatus necessary to transform Energy from a Transmission or Primary Line voltage.

  • If, at the Company’s option and in its sole discretion the service is metered at the Company’s Primary or Transmission Line voltage, three percent (3%) of the kWhs so metered will be deducted before computing the Energy Charge.NORTHERN INDIANA PUBLIC SERVICE COMPANY Original Sheet No. 57IURC Electric Service Tariff Original Volume No. 14Cancelling All Previously Approved Tariffs RATE 824RATE FOR ELECTRIC SERVICE GENERAL SERVICE – LARGE Sheet No. 3 of 5 MONTHLY MINIMUM CHARGE 1.

  • Ensure the WDT Error indicator flashes ON once every 2 seconds if the WD Enable switch on the monitor is placed in the OFF position to disable Watchdog monitoring, or the AC Line voltage is below the Watchdog disable level.

  • Ensure that the indicator illuminates when the AC Line voltage level is restored above the brownout level.

  • Ensure the unit is operational over the AC Line voltage range of 75 Vac to 135 Vac.

  • Ensure the indicator extinguishes when the AC Line voltage is less than 80 Vac.


More Definitions of Line voltage

Line voltage means the voltage provided to the trolleybus from the overhead contact line.
Line voltage means the voltage measured at a Train's or an Existing Train's collector shoes derived from the Traction Supply.

Related to Line voltage

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Line-voltage regulation means the difference between the no-load and the load line potentials expressed as a percent of the load line potential. It is calculated using the following equation:

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Line-make means the name of the motor vehicle manufacturer or distributor and a brand or name

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;

  • Duct is a single enclosed path to house facilities to provide Telecommunications Services.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Flashing light means a light flashing at regular intervals at a frequency of 120 flashes or more per minute.

  • Facility Production Limit means the production limit placed on the main product(s) or raw materials used by the Facility that represents the design capacity of the Facility and assists in the definition of the operations approved by the Director.

  • Runoff volume means the volume of water that runs off the land development project from a prescribed storm event.

  • Evaporative emissions means the hydrocarbon vapours lost from the fuel system of a motor vehicle other than those from exhaust emissions;