LED module definition

LED module means a light source module containing as light sources only LEDs. However it may optionally contain one or more holders for approved replaceable light sources.
Sample 1Sample 2Sample 3
LED module means an assembly having no cap and incorporating one or more LED packages on a printed circuit board. The assembly may have electrical, optical, mechanical and thermal components, interfaces and control gear.
Sample 1Sample 2Sample 3
LED module means an arrangement of one or more LED Chips or LED Components mounted to a circuit carrier, such as a printed circuit board (PCB) or flex foil, including passive or active components, including drive, communication, processing or control circuitry, attached thereto, as well as thermal management components and technologies. For clarity, “LED Module” does not include Luminaires.
Sample 1Sample 2Sample 3

Examples of LED module in a sentence

  • Each pedestrian signal LED module shall be fully MUTCD compliant and shall consist of double overlay message combining full LED symbols of an Upraised Hand and a Walking Person.

  • The LED module shall meet the requirements of the Institute of Transportation Engineers (ITE) LED purchase specification, “Pedestrian Traffic Control Signal Indications - Part 2: LED Pedestrian Traffic Signal Modules,” or applicable successor ITE specifications, except as modified herein.

  • The LED module shall be a module designed and constructed to be installed in a programmed visibility (PV) signal housing without modification to the housing.

  • All costs associated with the selection of sample modules, testing, reporting, and retesting, if applicable, shall be the responsibility of the LED module vendor and not be a cost to this contract.

  • Housing, LED driver, and LED module shall be products of the same manufacturer.

  • Each pedestrian signal LED module shall provide the ability to actuate the solid upraised hand and the solid walking person on one 12 inch (300mm) section.

  • Upon the request of the applicant the LED module shall be operated for 15 h and cooled down to ambient temperature before starting the tests as specified in this Regulation.

  • Removal or failure of any LED module shall not affect the operation of any other LED module or sign component.

  • The "WALKING PERSON" symbol shall be illuminated with a filled, white LED module.

  • The "UPRAISED HAND" symbol shall be illuminated with a filled, Portland orange LED module.


More Definitions of LED module

LED module means a light source module containing as light sources only LEDs;
Sample 1Sample 2Sample 3
LED module means an LED light source that is supplied as a single unit. In addition to one or more LEDs it may contain components to improve its optical, thermal, mechanical and electrical properties, but it does not include the LED Control Gear.
Sample 1Sample 2
LED module means an assembly having no cap and incor­ porating one or more LED packages on a printed circuit board. The assembly may have electrical, optical, mech­ anical and thermal components, interfaces and control gear;
Sample 1
LED module means a light source module containing as light sources only LEDs. However it may optionally contain one or more holders for approved replaceable light sources;"
Sample 1

Related to LED module

  • Required Modification is defined in Section 10.1(a) of the Lease.

  • Permitted Modification shall have the meaning ascribed thereto in Section 4.02.

  • Accelerator-produced material means any material made radioactive by a particle accelerator.

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Contract Manufacturer means a company that produces goods under contract for another company under the label or brand name of that company.

  • Nonconforming Goods means only the following: (i) product shipped is different than identified in Buyer's purchase order; or (ii) product's label or packaging incorrectly identifies its contents.

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Original equipment manufacturer means a company that manufactures products that it has designed from purchased components and sells those products under the company's brand name.

  • Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.

  • Permitted Modifications As defined in Section 2.02(a) of the Servicing Agreement.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Product Specifications means those Manufacturing, performance, quality - control release, and Fill/Finish specifications for Drug Substance or Licensed Product in the Territory, which are initially as set forth in the applicable Regulatory Approval for a Licensed Product, as such specifications may be amended from time to time pursuant to the terms of this Agreement.

  • City-based manufacturer means a person who: (i) holds any appropriate city license; (ii) is subject to applicable city taxes; and (iii) owns, operates, or leases a manufacturing facility within the city.

  • Tobacco product manufacturer means an entity that after the date of enactment of this Act directly (and not exclusively through any affiliate):

  • Manufacturer means the person or body responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stages of the construction of the vehicle which is the subject of the approval process.

  • Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time.

  • Product Manufacturer means the entity that assembles the component parts to manufacture the final Product;

  • Manufacturing site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • Licensed Material means the artistic or literary work, database, or other material to which the Licensor applied this Public License.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.