intermediate holding position definition
intermediate holding position means a designated position intended for traffic control at which taxiing aircraft and vehicles shall stop and hold until further cleared to proceed, when so instructed by the aerodrome control tower;
intermediate holding position means a designated position intended for traffic control at which taxiing aircraft and vehicles should stop and hold until further cleared to proceed when so instructed by the appropriate control unitaerodrome control tower.
intermediate holding position means a designated position intended for traffic control at which taxiing aircraft and vehicles shall stop and hold until further cleared to proceed, when soinstructed by the aerodrome control tower; “magnetic variation means the angular differencebetween True North and Magnetic North; “manoeuvring area” means that part of an aerodrome to be used for the take-off, landing and taxiing ofaircraft, excluding aprons; “minimum en-route altitude (MEA)” means the altitude for an en-route segment that provides adequate reception of relevant navigation facilities and ATS communications, complies with theairspace structure and provides the required obstacle clearance; “minimum obstacle clearance altitude” means theminimum altitude for a defined segment of flight that provides the required obstacle clearance; “minimum sector altitude” means the lowest altitude which may be used which will provide a minimum clearance of 300 m (1 000 ft) above all objects located in an area contained within a sector of a circle of 46 km (25 NM) radiuscentred on a significant point, the aerodrome reference point or the heliport reference point; “missed approach point” means that point in an instrument approach procedure at or before which the prescribed missed approach procedure must be initiated in order to ensure that theminimum obstacle clearance is not infringed; “missed approach procedure” means that procedure tobe followed if the approach cannot be continued; “nautical mile” means the length equal to 1 852 metresexactly. “navigation specification” means a set of aircraft andflight crew requirements needed to support
More Definitions of intermediate holding position
intermediate holding position means a designated position intended for traffic control at which a taxiing aircraft or vehicles stop and hold, until they are cleared to proceed, when so instructed by an aerodrome control tower;