Installation standard definition

Installation standard means the standard to which the Goods are to be installed and/or maintained, together with any formal requirements stipulated as a condition of the regulatory body by which the Seller is approved.
Sample 1Sample 2Sample 3
Installation standard means the standard adopted and published by the National
Sample 1Sample 2Sample 3
Installation standard means the standard adopted and published by the National Conference of States on Building Codes and Standards (NCSBCS), for the installation of manufactured homes titled "The Standard for Manufactured Home Installations," the accompanying manufacturer's instructions for the installation of the manufactured home, or such equivalent standard as adopted by rule.
Sample 1

Examples of Installation standard in a sentence

  • All standpipe systems with the exception of manual standpipes shall be designed with a minimum safety factor of 5 PSI or 10% of required pressure (whichever is greater) taken at the source for the hydraulically most demanding system and/or outlet.Section [F] 905.2, Installation standard, is amended by adding Section [F] 905.2.1, Class-I reducers, as follows: [F] 905.2.1 Class-I reducers.

  • Plans also include the introduction of the ACCA Quality Installation standard and the incorporation of advanced control strategies that will enhance the business model of partners who adopt these approaches.

  • Apply only when surfaces and environmental conditions are within limits prescribed by the material manufacturer and the ULC S705.2 Installation standard.

  • The Bank’s Works or Supply and Installation standard bidding documents (SBD) shall be used for all international competitive bidding (ICB) procurement.

  • The Licensed Installer shall conduct daily visual inspection, adhesion/cohesion testing and density measurements as outlined by the ULC S705.2-02 Installation standard.

  • Installation standard" means the standard adopted and published by the National H.B. 71 Enrolled CopyConference of States on Building Codes and Standards (NCSBCS), for the installation of manufactured homes titled "The Standard for Manufactured Home Installations," the accompanying manufacturer's instructions for the installation of the manufactured home, or such equivalent standard as adopted by rule.

  • I authorize and direct the Company, or in the Company's discretion, the Trustee of a rabbi trust, subject to the provisions of the Plan, to obtain and own insurance policies on my life.

  • Section 905.2; change to read as follows: 905.2 Installation standard.

  • To confirm the most recent versions of the Standard Specifications for Water Main Installation, standard drawings and Approved Materials list, please contact the District Engineering Department at (510) 668-4499 or visit the District website at www.acwd.org.

  • When Government-furnished property is no longer required or suitable for intended use, or has reached the end of its economic life, the Contractor shall prepare and provide transfer documentation to the Contracting Officer for approval and disposition instructions in accordance with FAR 45.5 and 45.6. Upon approval, the Contractor shall process the items in accordance with Installation standard procedures.


More Definitions of Installation standard

Installation standard. Comply with recommendations in ASTM C 1193 for use of joint sealants as applicable to materials, applications, and conditions indicated.
Sample 1

Related to Installation standard

  • Installation Site means the site at which the Product is originally installed.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Installation Works means, as the context so requires,

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Emission standard means specified limitations on the discharge of air contaminants into the atmosphere.

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Building Standard means the type, grade, brand, quality and/or quantity of materials Landlord designates from time to time to be the minimum quality and/or quantity to be used in the Building.

  • Network Connection Standards means the Distributor’s written technical and safety standards for connection of an Electrical Installation to the Network that are issued by the Distributor and updated from time to time, and include:

  • electrical installation means an electrical installation as defined in the Regulations;

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Building system means plans, specifications and documentation for a system of manufactured factory-built structures or buildings or for a type or a system of building components, including but not limited to: structural, electrical, mechanical, fire protection, or plumbing systems, and including such variations thereof as are specifically permitted by regulation, and which variations are submitted as part of the building system or amendment thereof.

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • HVAC System is defined in Section 6.10(a)(v).

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Installed means attached or connected such that an item requires tools for removal.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.