Installation Procedures definition

Installation Procedures means the procedures for the proper (i) assembly, erection and installation of the Towers on the Turbine foundations supplied by Purchaser, (ii) grouting of the Turbines to the Tower foundations and tightening of all bolts using the appropriate torque; (iii) assembly, erection and installation of the Turbine Nacelles and Turbine Blades upon the Towers as specified in the Turbine Specifications, Prudent Wind Industry Practices and Prudent Electrical Industry Practices; (iv) installation and testing of the Turbine electrical cables, communication cables, and control panels within the Turbine, and (v) connection of the cables from each Turbine Nacelle to the main circuit breaker within the ground controllers, all in accordance with the Turbine Installation Manual.
Sample 1Sample 2Sample 3
Installation Procedures means the procedures set forth in Exhibit D-1.
Sample 1

Examples of Installation Procedures in a sentence

  • Any deviation from the Standard Professional Installation Procedures will result in the installation being classified as a Non-Standard Installation, in which event additional charges will apply.

  • A manufacturer may use the test procedures pursuant to “California Certification and Installation Procedures for Medium and Heavy-Duty Vehicle Hybrid Conversion Systems,” as adopted on September 1, 2017, which is incorporated by reference herein.1.2. Chassis Dynamometer – Hybrid with ePTO.

  • Additional requirements are as specified in “California Certification and Installation Procedures for Medium and Heavy-Duty Vehicle Hybrid Conversion Systems,” as adopted on September 1, 2017, which is incorporated by reference herein.1.3. Portable Emission Measurement System (PEMS).

  • A manufacturer may use the test procedures pursuant to “California Certification and Installation Procedures for Medium and Heavy-Duty Vehicle Hybrid Conversion Systems,” as adopted on September 1, 2017, which is incorporated by reference herein.1.4. Powertrain testing.

  • A manufacturer may propose, as part of its Hybrid Technology Emission Test Plan, an alternate duty cycle in lieu of the duty cycles referenced in subsections 1.1, 1.2, and 1.3 of this section, as described in “California Certification and Installation Procedures for Medium and Heavy-Duty Vehicle Hybrid Conversion Systems,” as adopted on September 1, 2017, which is incorporated by reference herein.

  • In 310.Appendix A, Table L, after line 307, change "4,524.00" to "4524.00" and "5,976.90" to "5976.90.

  • When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with IAW local Installation Procedures citing the appropriate paragraphs as applicable.

  • Board Installation Procedures with Sample Scripting can be found in APPENDIX H.

  • The Contractor shall install in accordance with the cable manufacturer’s Standard Operation and Installation Procedures (SOP).

  • Following completion of the Installation Work with respect to any Turbine, Purchaser shall deliver a written notice of completion to Supplier (an “Installation Completion Notice”) and Supplier shall examine each Turbine in accordance with the Installation Procedures and the Turbine Installation Manual.

Related to Installation Procedures

  • Auction Procedures means the auction procedures constituting Part II of the form of Statement as of the filing thereof.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • AML/KYC Procedures means the customer due diligence procedures of a Reporting Finnish Financial Institution pursuant to the anti-money laundering or similar requirements of Finland to which such Reporting Finnish Financial Institution is subject.

  • Staff Vetting Procedures means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Administrative Procedures means the Administrative Procedures of Minnesota Management & Budget developed in accord with M.S. 43A.04, subdivision 4.

  • Bidding Procedures means the bidding procedures approved by the Bankruptcy Court pursuant to the Bidding Procedures Order.

  • Ordering Procedures means the ordering and award procedures specified in Clause 6 (Ordering Procedures) and Framework Schedule 5 (Ordering Procedure);

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Security Procedures means rules and regulations governing access to, and health and safety procedures while on, Government premises; and information technology security protocols;

  • Reconciliation Procedures means those procedures set forth in Section 7.09 of this Agreement.

  • Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Installation Works means, as the context so requires,

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Design Guidelines means the Fernkloof Estate architectural design guidelines to control all aspects of design and landscaping of any development within the Fernkloof Estate dev elopment, as amended from time to t ime in terms of the constitution of the MPOA or as required by the Council , a copy of the current draft which i s av ailable for inspection at the offices of the Association;

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Installation Site means the site at which the Product is originally installed.

  • Remarketing Procedures means the procedures for conducting Remarketings set forth in Part II of these Articles Supplementary.

  • Policies and Procedures means the written policies and procedures of the Client in any way related to the Services, including any such policies and procedures contained in the Organic Documents and the Offering Documents.

  • customs procedures means the treatment applied by the customs administration of each Party to goods which are subject to customs control.

  • Procedures shall collectively mean DST’s transfer agency procedures manual, third party check procedures, checkwriting draft procedures, Compliance + and identity theft programs and signature guarantee procedures;

  • Operating Procedures means the standard internal operating procedures and compliance policies established by the Company to implement the Compliance Plan.