Inspection Zone definition

Inspection Zone means the general area established by the operating institution for the purpose of limiting or controlling access to the area where the screening will be performed. This includes but is not limited to any ingress, egress, gate, portal, traffic path, and areas, access to which is restricted due to the presence of radiation. The ambient dose equivalent outside of the inspection zone shall not exceed 20 µSv (2 mrem) in any 1 hour.
Sample 1Sample 2
Inspection Zone means an area of land extending outwards from the outer edge of the Monitoring Zone the distance specified elsewhere in this licence (see Figure 1).
Sample 1Sample 2
Inspection Zone means an area where material arriving at the C&DD facility is placed and inspected prior to recording the material in the log of operations.
Sample 1Sample 2

Examples of Inspection Zone in a sentence

  • An OCMI is in command of a Ma- rine Inspection Zone and his or her of- fice may be referred to as a Coast Guard Marine Inspection Office.

  • Each COTP Zone and each Ma- rine Inspection Zone described in this part also includes the exclusive eco- nomic zone (EEZ) adjacent to the area for the purpose of enforcing or acting pursuant to a statute effective in the EEZ, as defined in § 2.30 of this sub- chapter.

  • These documents will be the basis for determining which bidders are qualified to bid on this Project.

  • Each COTP Zone and each Marine Inspection Zone described in this part also includes the United States terri- torial seas adjacent to the described area or zone for the purpose of enforc- ing or acting pursuant to a statute ef- fective in the United States territorial seas.

  • The completed form must be submitted to the Officer in Charge, Marine Inspection, in the Marine Inspection Zone within which the inspection is to be conducted.

  • Subpart 3.04—Coast Guard Areas3.04–1 Atlantic Area.3.04–3 Pacific Area.Subpart 3.05—First Coast Guard District3.05–1 First district.3.05–10 Sector Boston Marine Inspection Zone and Captain of the Port Zone.

  • Each COTP Zone and each Marine Inspection Zone described in this part also includes the contiguous zone adja- cent to the area or zone for the purpose of enforcing or acting pursuant to a § 3.01–5statute effective in the contiguous zone, as defined in § 2.28 of this sub- chapter.

  • Vessel owners or operators may submit a written request for exemption to the Officer in Charge, Marine In- spection, of the Marine Inspection Zone in which the vessel normally operates.

  • A Termite Inspection Zone is an unobstructed space which the termites must cross or pass around in order to gain access to a building or structure.

  • Each COTP Zone and each Marine Inspection Zone described in this part also includes the contiguous zone adja- cent to the area or zone for the purpose of enforcing or acting pursuant to a statute effective in the contiguous zone, as defined in § 2.28 of this sub- chapter.


More Definitions of Inspection Zone

Inspection Zone means an area of land extending at least 50 m in all directions from the outer edge of a Monitoring Zone, as shown in Figure 1.
Sample 1Sample 2
Inspection Zone means an area of land extending 50 m in all directions from the outer edge of the Monitoring Zone as indicated in Figure 1.
Sample 1Sample 2
Inspection Zone means an area of land extending 50 m in all directions from the outer edge of the Monitoring Zone where no Wheat, Barley or Related Species may be grown, and which must be inspected while the GMOs are Flowering.
Sample 1

Related to Inspection Zone

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Inspections has the meaning set forth in Section 4.1.2.

  • Home inspection report means a written report that is

  • Due Diligence Examination shall have the meaning set forth in Section 3.2.

  • Inspection Report means the report delivered by the Master Servicer or the Special Servicer, as the case may be, substantially in the form of Exhibit L hereto.

  • Onsite means within the Prescribed Premises boundary.

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead- based paint and the provisions of a report explaining the results of the investigation.

  • Initial Environmental Examination or “IEE” means the initial environmental examination for the Project, including any update thereto, prepared and submitted by the Borrower and cleared by ADB;

  • Inspection Period means the period beginning on the Effective Date and expiring at 5:00 p.m. eastern time on the forty-fifth day after the Effective Date.

  • Phase I Environmental Site Assessment is an assessment of the environmental condition of the Property performed in accordance with the American Society of Testing and Materials (ASTM) Standard E1527-05 “Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process,” or any successor to such ASTM Standard which is active at the time of the assessment.

  • Site Visit means a visit to the Site; and

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Project Site(s) means the place(s) specified in the SCC for the supply and installation of the System.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Examined Facility means (I) each proposed new Generator and proposed new UDR project, and each existing Generator that has ERIS only and no CRIS, that is a member of the Class Year Study, Additional SDU Study or Expedited Deliverability Study that requested CRIS, or that requested an evaluation of the transfer of CRIS rights from another location in the Class Year Facilities Study commencing in the calendar year in which the Class Year Facility Study determination is being made (the Capability Periods of expected entry as further described below in this Section, the “Mitigation Study Period”), and (II) each (i) existing Generator that did not have CRIS rights, and (ii) proposed new Generator and proposed new UDR project, provided such Generator under Subsection (i) or (ii) is an expected recipient of transferred CRIS rights at the same location regarding which the ISO has been notified by the transferor or the transferee of a transfer pursuant to OATT Attachment S Section 25.9.4 that will be effective on a date within the Mitigation Study Period (“Expected CRIS Transferee”). The term “Examined Facilities” does not include any facility exempt from an Offer Floor pursuant to the provisions of Section 23.4.5.7.7. Exceptional Circumstances: shall mean one or more unavoidable circumstances, as determined by the ISO, that individually or collectively render as unavailable the data necessary for the ISO to perform an audit and review of a Market Party, pursuant to Section 23.4.5.6.2 of this Services Tariff. Exceptional Circumstances may include, but are not limited to: the inaccessibility of the physical facility; the inaccessibility of necessary documentation or other data; and the unavailability of information regarding the regulatory obligations with which the Market Party will be required to comply in order to return its Generator to service which regulatory obligations are not yet known but which will be made known by the applicable regulatory authority under existing laws and regulations provided that none of the above described circumstances are the result of delay or inaction by the Market Party. The magnitude of the repair cost, alone, shall not be an Exceptional Circumstance.

  • Surveys has the meaning set forth in Section 4(o) above.

  • Project site, where applicable, means the place indicated in bidding documents.

  • Inspection means activities such as measuring, examining, testing, gauging one or more characteristics of the product or service and comparing the same with the specified requirement to determine conformity.

  • Phase I Environmental Assessment A “Phase I assessment” as described in, and meeting the criteria of, the ASTM, plus a radon and asbestos inspection.

  • Environmental Review means the Federal

  • construction site means a workplace where construction work is being performed;

  • Environmental Site Assessment means a Phase I environmental report meeting the requirements of the American Society for Testing and Materials, and, if in accordance with customary industry standards a reasonable lender would require it, a Phase II environmental report, each prepared by a licensed third party professional experienced in environmental matters.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of