Input Voltage definition

Input Voltage. Standard: -48 VDC Range: -38.4 VDC to -62.4 VDC Optional: +24/-24V DC. (-20%, +30%)
View Source
Input Voltage. Standard: -48 VDC Range: -38.4 VDC to -62.4 VDC Optional: +24/-24 VDC. (-20%, +30%) Power Consumption: 50 ▇▇▇▇▇ includes service channel options installed
View Source

Examples of Input Voltage in a sentence

  • The detailed electrical specifications of Neg48DC/DC PSU are shown as below : Input Voltage Range -36 ~ -75VDC Inrush Current 75A max.

  • Specifications: • Microcontroller ATmega328 • Operating Voltage 5V • Input Voltage (recommended) 7-12V • Input Voltage (limits) 6-20V • Digital I/O Pins 14 (of which 6 provide PWM output) • Analog Input Pins 6 • DC Current per I/O Pin 40 mA • DC Current for 3.3V Pin 50 mA • Flash Memory 32 KB of which 0.5 KB used by bootloader • SRAM 2 KB • EEPROM 1 KB • Clock Speed 16 MHz For the proper working of the board, a battery will be connected to it.

  • Google Chrome Supported Browser: MS Explorer11, MS Edge, Mozilla Firefox (Windows 64bit only), Apple Safari (Mac OS X only) Memory 1024MB RAM, 256MB Flash Operating Temperature / Humidity -25°C ~ +60°C (-13°F ~ +140°F) / Less than 90% RH Storage Temperature / Humidity -50°C ~ +60°C (-58°F ~ +140°F) / Less than 90% RH Certification IP52 / Plenum rate (UL2820) Input Voltage ▇▇▇ (IEEE802.3af, Class3), 12VDC Power Consumption ▇▇▇ : Max.

  • The ranges related to the AC voltage are listed below: Input Voltage 90% to 110% of the nominal voltage Power Frequency 98% to 102% of the nominal power frequency Voltage Distortion The total harmonic wave component should be no greater than 10%.

  • This will allow for use in international markets as well as providing wide acceptance in the U.S. Power Rating: TBD KVA max Input Voltage Frequency : [***] Input Voltage Range #1: [***] Input Current #1: TBD Amps Max @ [***]1VACrms Uninterrupted Power System : 10 minute duration for controlled shut down.

  • Storage Temperature -65°C to 150°C Ambient Temperature with Power Applied 0°C to 85°C Supply Voltage to Ground Potentials (Inputs and AVCC, VDD only] -0.3V to 3.6V DC Input Voltage -0.5V to 5.5V Junction Temperature (Tj) 125°C Max Power (PMAX) 1.2W Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device.

  • Reverse Voltage Yes Mechanical Reverse Voltage Protection Protection FWT Std Power Input ********* ********** FWT Input Voltage 14V DC to The FWT is specification nominal 15.5V DC compliant and operates safely while within these supply ranges FWT Lower Voltage Input 10-13.9V The FWT will safely operate Extreme within these extended ranges but with reduced battery charging capacity.

  • P28301 11/476,568 June 29, 2006 Digital Logic Control DC-To-DC Converter With Controlled Input Voltage And Controlled Power Output Filed response to 1st Office Action on 2/3/09 Process and apparatus for powering a powered device with a fuel cell.

  • Output Power Power factor DC Input Voltage DC Input Current Time Active Time disabled Time Idle Power produced Protective function limits (Viz-AC Over voltage, AC Under voltage, Over frequency, Under frequency ground fault, PV starting voltage, PV stopping voltage.

  • Input Current (A) Input Voltage (V) Input Power (kW), also broken down by active, reactive, and apparent power components.

Related to Input Voltage

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • high voltage means the set of nominal voltage levels that are used in power systems for bulk transmission of electricity in the range of 44kV<Un 220 kV. [ SANS 1019];

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.