ICP-AES definition
Examples of ICP-AES in a sentence
Particles collected below 10um will be analyzed for TiO2 content via ICP-AES, which will be used to determine the mass of TiO2 in the <10um powder and to quantify all TiO2 mass content below 10um.
Metal determinations were carried out with a Varian Liberty ▇▇▇ ▇▇▇▇▇ (▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇) inductively coupled plasma-atomic emission spectrometer (ICP-AES).
Multi-element analysis 35 elements Aqua Regia digest, ICP-AES finish.
The nominal range of acceptability for comparing the ICP-AES results to the reference values is typically ± 10%.
Two dissolutions techniques were utilized: sodium peroxide fusion and lithium tetraborate fusion.35,38 These samples were measured by ICP-AES using the method described in the previous paragraph.
The ICP-MS and ICP-AES analyses could only accounted for 60 to 70% of the mass of material dissolved on an oxide basis.
For instance, the most used methods currently available are fluorescence based microscopy, ICP-AES, flow cytometry.
The weight percent total solids and calcine solids are analyzed as part of the preparation process for the ICP-AES analysis.23 Approximately 10 grams of slurry are added to a platinum crucible and dried at 110 degrees Celsius.
Each of the duplicate samples was analyzed twice for each element of interest by Inductively Coupled Plasma – Atomic Emission Spectroscopy (ICP-AES) or ion chromatography (IC), for a total of four measurements per element.
Zr was analyzed using the PF preparations with ICP-AES and the measured values were significantly higher than those measured after the LM preparation.