Hose assembly definition

Hose assembly means an assembly of a flexible hose and couplings.
Hose assembly means a hose, or hoses connected together, for use in the transfer of dangerous goods to or from a tank on a vehicle, rail wagon, bulk container or storage container and includes —
Hose assembly means a hose, or hoses connected together, for use in the transfer of dangerous goods to or from a tank on a vehicle, a portable tank or a storage receptacle and includes —

Examples of Hose assembly in a sentence

  • Hose assembly must be replaced prior to use if there is evidence of excessive abrasion, wear, or if hose is damaged.

  • Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following two installation methods.

  • The hose assembly is then considered to have passed the hydrostatic test if no permanent distortion has taken place.6) Hose assembly passing the test must be completely dried internally.

  • Hose assembly constructed of fully welded corrugated 304 stainless steel hose with stainless steel overbraid with threaded stainless steel pipe fittings.

  • Hose assembly shall consist of a UL-listed high-pressure color-coded conductive hose with a DISS nut and gland on the upper end.

  • Hose assembly shall be factory assembled to maintain the integrity of the assembly.

  • Hose assembly shall consist of a D.I.S.S. female fitting for attaching to the ceiling outlet, a hose retractor and Puritan Bennett quick-connect coupler (Dyna-Con for Nitrogen) with inherent primary and secondary check valves, for attaching to hoses connected to patient care equipment.

  • Hose assembly materials shall conform to the requirements of PM-3.2.PM-4.3.3 Hose Assembly Performance.

  • Hose assembly passing the test must be completely dried internally.

  • Clause 1.1, All on-board vehicle fuel hose requirements have been taken out of the ANSI/CSA NGV 4.2-2014 ●CSA 12.52-2014 standard and moved to the ANSI/CSA NGV 3.1●CSA 12.3 standard.2. Clause 1.1, Hose assemblies in the 2014 edition are now categorized as follows: Class A: Hose assembly connecting the dispenser to the fueling nozzleClass D: Hose assemblies used on other station equipment Note: ANSI/CSA NGV 3.1-2014●CSA 12.3-2014, Part 22 covers Class B and C vehicle hoses.


More Definitions of Hose assembly

Hose assembly means an assembly of a flexible hose and couplings. Part I - Approval of specific equipment of vehicles of categories M and N using liquefied petroleum gases in their propulsion system
Hose assembly. _ means a hose, or hoses connected together, for use in the transportation or transfer of dangerous goods and includes -

Related to Hose assembly

  • the Assembly means the National Assembly for Wales;

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Tube housing assembly means the tube housing with tube installed. It includes high-voltage and/or filament transformers and other appropriate elements when such are contained within the tube housing.

  • Assembly means the Assembly of Heads of State and Government of the African Union;

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Certified Remanufacture System or Verified Engine Upgrade means engine upgrades certified or verified by EPA or CARB to achieve a reduction in emissions.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Blood component means that part of blood separated by physical or mechanical means.

  • National Assembly (“Cynulliad Cenedlaethol”) means the National Assembly for Wales;

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Physical Therapy Compact Commission or "commission" means the national administrative body whose membership consists of all states that have enacted the compact.

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Unfit-for-use tank system means a tank system that has been determined through an integrity assessment or other inspection to be no longer capable of storing or treating hazardous waste without posing a threat of release of hazardous waste to the environment.

  • Cannabis testing facility means an entity registered by

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Reactor means a vat or vessel, which may be jacketed to permit temperature control, designed to contain chemical reactions.

  • Digital audio-visual works which means a series of related images which, when shown in succession, impart an impression of motion, together with accompanying sounds, if any;

  • Conventional filtration treatment means a series of processes including coagulation, flocculation, sedimentation, and filtration resulting in substantial particulate removal.

  • Public safety answering point or “PSAP” means an answering location for 9-1-1 calls originating in a given area. A PSAP may be designated as Primary or Secondary, which refers to the order in which calls are directed for answering. Primary PSAPs respond first; Secondary PSAPs receive calls on a transfer basis only, and generally serve as a centralized answering location for a particular type of emergency call. PSAPs are staffed by employees of Service Agencies such as police, fire or emergency medical agencies or by employees of a common bureau serving a group of such entities.

  • Study means the investigation to be conducted in accordance with the Protocol.