High gloss definition

High gloss means any coating that achieves at least 85% reflectance on a 60° meter when tested by ASTM Standard Test Method for Specular Gloss (see 9VAC5-20-21).

Examples of High gloss in a sentence

  • High gloss finish pumps are authorized for female cadets at their own expense.

  • High gloss refers to high-sheen finish with a gloss range more than 65 when measured at a 60-degree meter.

  • High gloss paints, factory finished metals or other materials which increase visual impacts are not permitted.

  • If the transcriptions were inaccurate, which they usually were to some degree, they were manually corrected by the author.

  • For a non-flat high gloss coating manufactured on or after January 1, 2005, the statement "High gloss" shall be prominently displayed.

  • High gloss and smoothness is achieved by using highspeed rollers with alternating steel and fabric-filled rolls.

  • High gloss vinyl (plastic) awnings, backlit, and metal awnings are prohibited.

  • High gloss black poromeric (Corfam) or patent leather shoes are also authorized at the cadet’s own expense.

  • Material: High gloss acrylic adhesive-backed vinyl film 0.0032 inch; printed with UV and chemical resistant inks.

  • High gloss acrylic adhesive-backed vinyl film 0.0032 inch; printed with UV and chemical resistant inks.

Related to High gloss

  • high risk breach means that the threshold for notifying the individual is higher than that for notifying the relevant supervisory authority.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • high seas means seas that are not within the seaward limits of—

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • Fossil fuel-fired means, with regard to a unit:

  • High school means grades 9 through 12.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • renewable energy sources means renewable sources such as small hydro, wind, solar including its integration with combined cycle, biomass, bio fuel cogeneration, urban or municipal waste and other such sources as approved by the MNRE;

  • Embryo/fetus means the developing human organism from conception until the time of birth.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Sole source procurement means a procurement without competition pursuant to a determination under Subsection 63G-6a-802(1)(a) that there is only one source for the procurement item.

  • Renewable Energy Source means an energy source that is not fossil carbon-based, non- renewable or radioactive, and may include solar, wind, biomass, geothermal, landfill gas, or wave, tidal and thermal ocean technologies, and includes a Certified Renewable Energy Source.

  • High Deductible Health Plan means a Health Plan as defined by 26 USC § 223(c)(2)(A) that also is a Qualified Health Plan.

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • High-Cost Home Loan as defined in the New Mexico Home Loan Protection Act effective January 1, 2004; (iii) “High-Cost Home Mortgage Loans” as defined in the Massachusetts Predatory Home Loan Practices Act effective November 7, 2004 and (iv) “High Cost Home Loans” as defined in the Indiana Home Loan Practices Act effective January 1, 2005.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Mis-procurement means public procurement in contravention of any provision of Sindh Public Procurement Act, 2010, any rule, regulation, order or instruction made thereunder or any other law in respect thereof, or relating to, public procurement;

  • Weather Normalized Site EUI means the amount of Energy that would have been used by a property under 30-year average temperatures, accounting for the difference between average temperatures and yearly fluctuations.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.