Hacksaw definition

Hacksaw. 1 SET Open End Wrenches – 1/4" TO 9/16"
View Source

Examples of Hacksaw in a sentence

  • Eye Goggles with case Hand Rubber Pads ▇▇▇▇▇ Keys Centre Punch Chalk Line Chisel wood Chisel cold Glass Pliers Hacksaw Frame Hammer claw Hammer rubber or plastic Level 24-inch spirit Measuring Tape Nail set Paint Brush 4" Pliers combination ▇▇▇▇▇ ▇▇▇ Pointing Trowel Putty Knife straight Putty Knife bent Razor Blade Scraper Screwdriver Rob.

  • The employee shall supply himself with the following kit of tools: -Tool Box; Tape Measure; pair of Snips; Chalk Line; Hammer; Adjustable Hacksaw; Hand Deck Punch; Gypsum Knife; Hand Saw; Saw; Pair Nippers; ▇▇▇▇▇ ▇▇▇; 24” Spirit Level; Magnetic Punch; All other tools and equipment are to be supplied by the employer.

  • EA 1 Combination Wrench ( 5/16” - 1 ¼” open boxed) Set 1 A/C Service Wrench (3/8”,5/16”) combo EA 1 Swaging Tool Set (1/4”,3/8”,1/2”,5/8” ) EA 1 Flare Kit EA 1 Gauge Manifold Set R-410 / R-22 EA 2 Tool Bag / Box EA 1 Millimeter EA 1 Clamp-On Meter Set 1 Pocket Thermometer EA 1 Flashlight EA 1 Pipe wrenches 14” , 18” & 24” EA 3 ELECTRICIAN TOOL LIST Channel Lock 420 EA 1 Channel Lock 480 EA 1 Crimper, 22 to 10 AWG EA 1 Hacksaw Frame EA 1 Knife, Electrician’s EA 1 Rule, 25 ft.

  • The Contractor shall furnish all other necessary tools or equipment and replace all Drillbits and Hacksaw Blades as required.

  • The balance shall be paid to the Architectural Glass and Metal Contractors FOR ASSOCIATION FOR THE UNION THESE ARE TOOLS A JOURNEYMAN SHOULD HAVE TO DO HIS JOB DESCRIPTION pair 1 pair 1 set 1 only 1 pair only 1 set 1 only 1 only 1 only Eye Goggles with Hand Rubber Pads ▇▇▇▇▇ Keys Centre Punch wood Chisel cold Glass Pliers Hacksaw Frame Hammer claw Hammer rubber or plastic Level Measuring Tape Nail set Paint Brush Pliers ▇▇▇▇▇ ▇▇▇ Pointing Trowel Razor Blade Scraper Screwdriver Rob.

  • The EMPLOYER shall furnish the following tools: Cups Drills Hacking knives Bits 4’ level Glass & Plastic cutters Countersinks Rollers Protective glass gloves Power tools Caulking guns Hacksaw blades Where the EMPLOYER provides a secure place for the storage of tools, EMPLOYEES who are issued tools shall be responsible for those tools.

  • Leather tool apron Adjustable bevel Claw hammer Cross cut handsaw 10m or 30ft long tape measure (metric and imperial) 2’ level 4’ level 10” adjustable wrench String line ▇▇▇▇▇ ▇▇▇ Coping saw Hacksaw 1 set of chisels 10mm to 30 mm wide Block plane #4 plane 1 set of good quality drill bits from 2mm to 12mm 1 set of screw drivers incl.

  • Rigid #15 Tubing Cutter Rigid 18” Pipe Wrench ▇▇▇▇ 3” Plastic Cutter Scratch Awl Channel Locks #430 Caulking Gun 25’ Tape Measure Band Torque Wrench Torpedo level 24” Level Striker Hacksaw 4-way Screwdriver Cats Rigid 14” Pipe Wrench 10” Crescent Wrench 8” Crescent Wrench 20oz.

  • All classifications of technicians and installers shall provide themselves with the following minimum list of tools: Punch down tool Coax crimp tool Wire strippers Utility knife Sta-Kon tool Lineman pliers Channel locks Flathead screwdrivers (assorted sizes) Sheetrock saw (hand type) ▇▇▇▇▇▇▇▇-head screwdrivers (assorted sizes) Hammer Scissors Awl Flashlight Tape measure Needle-nose pliers Torpedo level (8") Hacksaw frame The employer shall furnish all other necessary tools or equipment.

  • Vendor should strictly adhere to all prevailing safety rules and regulations of the Refinery and shall provide necessary safety shoes, helmets, safety belts, gloves, aprons, Gum boot, Ear-muff, Face shield, Hand gloves, Nose Plier, Nails, screw drivers set, Hacksaw cutter for Hole in Gland plate, etc.