General ventilation definition

General ventilation means the supply and removal of air from a space to dilute or remove contaminants.
General ventilation means the normal exchange ofair for odor, temperature and humidity control.
General ventilation means the removal by mechanical means of gas, vapour, mist, fumes, smoke or dust from a general area and replacement with fresh air; (ventilation générale)

Examples of General ventilation in a sentence

  • General ventilation and/or local fume hood in order to maintain hazardous agent concentration in air below acceptable limits.

  • Exposure controls Appropriate engineering controls General ventilation.

  • General ventilation (typically 10 air changes per hour) should be used.

  • Section 8 - Exposure Controls / Personal Protection Exposure guidelines: Engineering controls: General ventilation normally adequate.

  • General ventilation is simple way to induce air movement in the building.

  • General measures : General ventilation and local fume extraction must be adequate to keep fume concentrations within safe limits.

  • General ventilation and local fume extraction must be adequate to keep fume concentrations within safe limits.

  • In determination of any exposure procedures, protection, or testing, use the lowest rated ingredient from Section 2.ENGINEERING AND EXPOSURE CONTROLS: General ventilation (typically 10 air changes per hour) should be used.

  • Exposure controls‌ Appropriate engineering controls General ventilation.

  • General: ventilation, electrical grounding, and care in handling coatings, paints, solvents and equipment are important safety precautions during coating and painting projects.

Related to General ventilation

  • Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;

  • Boiler means an enclosed fossil or other fuel-fired combustion device used to produce heat and to transfer heat to recirculating water, steam, or other medium.

  • Cheating means intentionally to misrepresent the source, nature, or other conditions of academic work so as to accrue undeserved credit, or to cooperate with someone else in such misrepresentation. Such misrepresentations may, but need not necessarily, involve the work of others. Cheating includes, but is not limited to:

  • Landscape waste means any vegetable or plant waste except garbage. The term includes trees, tree trimmings, branches, stumps, brush, weeds, leaves, grass, shrubbery, and yard trimmings.

  • Sanitary with respect to a building, means it is free from danger or hazard to the health of persons occupying or frequenting it or to that of the public, if such danger arises from the method or materials of its construction or from any equipment installed therein, for the purpose of lighting, heating, ventilating, or plumbing.

  • Automobile Headliner Adhesive means an aerosol adhesive designed to bond together layers in motor vehicle headliners.

  • Conditioning means drying, cleaning, scarifying, and other operations which could change the purity or germination of the seed and require the seed lot to be retested to determine the label information.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Water heater means an appliance for supplying hot water for purposes other than space heating or pool heating.

  • Sewage means a combination of the water-carried wastes from residences, business buildings, institutions, and industrial establishments, together with such ground, surface, and storm waters as may be present.

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • electrical and electronic equipment or ‘EEE’ means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields and designed for use with a voltage rating not exceeding 1 000 volts for alternating current and 1 500 volts for direct current;

  • In-situ conservation means the conservation of ecosystems and natural habitats and the maintenance and recovery of viable populations of species in their natural surroundings and, in the case of domesticated or cultivated species, in the surroundings where they have developed their distinctive properties.

  • General anesthesia means a drug-induced loss of consciousness during which patients are not arousable, even by painful stimulation. The ability to independently maintain ventilatory function is often impaired. Patients often require assistance in maintaining a patent airway, and positive pressure ventilation may be required because of depressed spontaneous ventilation or drug-induced depression of neuromuscular function. Cardiovascular function may be impaired.

  • general waste means waste that does not pose an immediate hazard or threat to health or to the environment, and includes-

  • Drinking water means water that meets criteria as specified in 40 CFR 141 National Primary Drinking Water Regulations. "Drinking water" is traditionally known as "potable water." "Drinking water" includes the term "water" except where the term used connotes that the water is not potable, such as "boiler water," "mop water," "rainwater," "wastewater," and "nondrinking" water.

  • HVAC means heating, ventilation and air conditioning.

  • Sanitation means the promotion of hygiene and the prevention of disease and other consequences of ill health relating to environmental factors ;

  • Underground source of drinking water means an aquifer or its portion:

  • Water means the chemical element defined as H2O in any of its three natural states, liquid, solid and gaseous.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Plumbing means plumbing as defined in Section 1(1) of the Act.

  • Drainage means the removal of surface water or groundwater

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Ex-situ conservation means the conservation of components of biological diversity outside their natural habitats.