General T&C definition

General T&C each mean Annex C of this Agreement.
General T&C each mean Annex C of this
General T&C means this document.

Examples of General T&C in a sentence

  • All such cases will be referred to:The Deputy Director General (TC), DPD, NSSO Mahalanobis Bhawan,164, Gopal Lal Tagore Road, Kolkata- 700108.

  • These contract terms shall not supersede the License Terms and Conditions of DURST on the Surrender of Software (hereinafter: “General T&C”), but rather they are more specific provisions for the area “SaaS” in addition to the General T&C.

  • In the event of contradictions between the General T&C, the present contract terms shall precede.

  • Insofar as any circumstance is not regulated in the present contract terms, the General T&C of DURST shall apply.

  • In reference to clause 48.3 of General T&C of this tender offered Item meets the minimum local content requirement for us to be qualified under “Class –I Local supplier”/ ”Class-II local supplier”[CHOOSE ONE AS APPLICBALE] & local content of offered product is %.

  • Information on registering in SAM is available at the SAM Internet site: https://www.sam.gov/SAM/ and in EPA’s General T&C “System for Award Management and Universal Identifier Requirements” of the pass-through entity’s agreement with EPA.

  • I understand that Citibank may from time to time vary the General T&C with prior notice.• I confirm my acceptance of the interest rates and other details applicable to my restructure request above and that I am liable to pay all amounts calculated accordingly as well as the Personal Loan fees, rates, charges and penalty displayed below and in Citibank’s Schedule of Fees and Charges .

  • All such cases will be referred to:The Deputy Director General (TC), DPD, NSSO, Mahalanobis Bhawan,164, Gopal Lal Tagore Road, Kolkata- 700108.

  • Partner shall: - receive access to sales and technical enablement content, technical architecture best practices and advanced topics as and when made available by Exasol; - gain access to the Exasol Partner Portal; - have access to e-learning tutorials (Exacademy) leading to technical and sales certification; - be entitled to register opportunities via the ORF (refer to Agreement, Section 3); - be entitled to install and use NFR-Licenses (refer to Agreement, Section 10 and General T&C, Section 3 below).

  • Any general terms and conditions of sale deviating from, supplementing or contradicting these General T&C shall not become part of the contract even if the Seller is aware of them, unless their applicability is expressly confirmed by the Seller in writing.

Related to General T&C

  • (1) IN GENERAL.—The term qualified trade or business’ means any trade or business other than—

  • (i) IN GENERAL.—The term corporate bond yield curve’ means, with respect to any month, a yield curve which is prescribed by the Secretary for such month and which reflects the average, for the 24-month period ending with the month preceding such month, of monthly yields on investment grade corporate bonds with varying maturities and that are in the top 3 quality levels available.

  • General Terms means these terms and conditions.

  • (A) IN GENERAL.—The term tax’ means—

  • Pre-Construction Phase Services means the participation, documentation and execution of Contractor’s Pre-Construction Phase deliverables as required by this Agreement and further defined in Article 5.

  • General Terms and Conditions means the General Terms and Conditions for Services Contracts as referenced on the RFP cover page.

  • General Wage Increase means a general wage increase resulting from the formula set out in this LOA and applied as a percentage increase to all wage rates in the collective agreement on the first pay day after the commencement of the eleventh (11th) month in a collective agreement year;

  • Equipment with Specific Operational Limits means any Equipment related to the thermal oxidation of waste or waste derived fuels, fume incinerators or any other Equipment that is specifically referenced in any published Ministry document that outlines specific operational guidance that must be considered by the Director in issuing of a Certificate of Approval.

  • Class II renewable energy means electric energy produced at a

  • Class I renewable energy means electric energy produced from

  • SOUND NATURAL TEETH means teeth that: • are free of active or chronic clinical decay; • have at least fifty percent (50%) bony support; • are functional in the arch; and • have not been excessively weakened by multiple dental procedures. SPECIALTY PRESCRIPTION DRUG is a type of prescription drug listed on our formulary that generally is identified by, but not limited to, features such as: • being produced by DNA technology; • treats chronic or long term disease; • requires customized clinical monitoring and patient support; and • needs special handling.

  • Automobile Headliner Adhesive means an aerosol adhesive designed to bond together layers in motor vehicle headliners.

  • Automobile Related Injury means bodily Injury sustained by a [Member] as a result of an accident:

  • Limited Resource Constraint means, for the 2017/2018 Delivery Year and for FRR Capacity Plans the 2017/2018 and Delivery Years, for the PJM Region or each LDA for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for a Delivery Year, a limit on the total amount of Unforced Capacity that can be committed as Limited Demand Resources for the 2017/2018 Delivery Year in the PJM Region or in such LDA, calculated as the Limited Demand Resource Reliability Target for the PJM Region or such LDA, respectively, minus the Short Term Resource Procurement Target for the PJM Region or such LDA, respectively.

  • Adult foster care means room and board, supervision, and special services to an adult who has a

  • Minimum Extended Summer Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Extended Summer Demand Resources and Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Extended Summer Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Limited Demand Resource Reliability Target for the PJM Region in Unforced Capacity]. For an LDA, the Minimum Extended Summer Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Limited Demand Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative. Minimum Generation Emergency:

  • General Unsecured Claim means any Claim that is not a/an: Administrative Claim; DIP Facility Claim; Professional Fee Claim; Priority Tax Claim; Secured Tax Claim; Other Priority Claim; Other Secured Claim; Intercompany Claim; Prepetition Debt Claim; or 510(b) Equity Claim.

  • General purpose adhesive means any non-aerosol adhesive designed for use on a variety of substrates. “General Purpose Adhesive” does not include (i) contact adhesives, (ii) construction, panel, and floor covering adhesives, (iii) adhesives designed exclusively for application on one specific category of substrates (i.e., substrates that are composed of similar materials, such as different types of metals, paper products, ceramics, plastics, rubbers, or vinyls), or (iv) adhesives designed exclusively for use on one specific category of articles (i.e., articles that may be composed of different materials but perform a specific function, such as gaskets, automotive trim, weather-stripping, or carpets).

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Limited Resource Price Decrement means, for the 2017/2018 Delivery Year, a difference between the clearing price for Limited Demand Resources and the clearing price for Extended Summer Demand Resources and Annual Resources, representing the cost to procure additional Extended Summer Demand Resources or Annual Resources out of merit order when the Limited Resource Constraint is binding.

  • General Unsecured Claims means Claims against any Debtor that are not Secured Claims, Administrative Claims, Priority Claims, Professional Compensation Claims, Intercompany Claims, or Equity Interests.

  • Additional Xxxx of Sale means each document, in the form of Attachment D hereto, executed by an authorized officer of VL Funding, the VL Funding Eligible Lender Trustee on behalf of VL Funding, Funding and the Interim Eligible Lender Trustee on behalf of Funding which shall: (i) set forth the list and certain terms of (a) Additional Loans offered by VL Funding and the VL Funding Eligible Lender Trustee on behalf of VL Funding and accepted for purchase by the Interim Eligible Lender Trustee for the benefit of Funding, including the Additional Loans Purchase Price for the Additional Loans being sold thereunder or (b) Substituted Loans substituted by VL Funding and (ii) sell, assign and convey to Funding and the Interim Eligible Lender Trustee, for the benefit of Funding, and their assignees, all right, title and interest of VL Funding and of the VL Funding Eligible Lender Trustee on behalf of VL Funding in the Additional Loans or Substituted Loans, as applicable, listed on the related Additional Xxxx of Sale and (iii) certify that the representations and warranties made by VL Funding and the VL Funding Eligible Lender Trustee on behalf of VL Funding pursuant to Sections 5(A) and (B) of these Master Terms, by the Servicer as set forth in Section 5(C) and by the Interim Eligible Lender Trustee as set forth in Section 5(D) are true and correct.

  • General anesthesia means a drug-induced loss of consciousness during which patients are not arousable, even by painful stimulation. The ability to independently maintain ventilatory function is often impaired. Patients often require assistance in maintaining a patent airway, and positive pressure ventilation may be required because of depressed spontaneous ventilation or drug-induced depression of neuromuscular function. Cardiovascular function may be impaired.

  • Noncommercial purposes with respect to motor fuel means not for resale.

  • Applicable effluent standards and limitations means all State and Federal effluent standards and limitations to which a discharge is subject under the Act, including, but not limited to, effluent limitations, standards of performance, toxic effluent standards and prohibitions, and pretreatment standards.

  • Train Unloading Infrastructure means train unloading infrastructure reasonably required for the unloading of iron ore from the Railway to be processed, or blended with other iron ore, at processing or blending facilities in the vicinity of that train unloading infrastructure and with the resulting iron ore products then loaded on to the Railway for transport (directly or indirectly) to a loading port. Company to obtain prior Ministerial in-principle approval