Gas temperature definition

Gas temperature means the temperature of gas in a cylinder.
Gas temperature. The temperature of gas in a cylinder.

Examples of Gas temperature in a sentence

  • When the measuring equipment is a positive displacement meter, the volume of Gas delivered through the meter shall be computed by properly applying, to the volume delivered at flowing Gas pressures and temperatures, correction factors for (i) absolute static pressure, (ii) flowing Gas temperature, and (iii) compressibility ratio.

  • Gas temperature in points of sampling The graph in Figure 5 shows that in the first mode (5840 s – 6092 s) is reached and the maximum degree of conversion of the hydrogen concentration reaches 40%.

  • With respect to Gas delivered at High Pressure, flowing Gas temperature shall be assumed to average 60 degrees Fahrenheit for all measurement, unless Customer and Company agree otherwise.

  • In determining the flowing temperature factor, supercompressibility factor, and compressibility ratio factor "s" for use in computing the volume of Gas delivered through a meter, the flowing Gas temperature for only the period(s) of time that Gas was flowing through the meter shall be used.

  • The average of the record to the nearest one degree Fahrenheit (1°F), obtained while Producers’ Gas and MV Mitigation Gas is being delivered, shall be the applicable flowing Gas temperature for the period under consideration.

  • Gas temperature data recording shall consist of measurements made at equally spaced intervals, not to exceed 15 minutes per interval.

  • Gas temperature at the inlet to a dry particulate matter control device.

  • A single point temperature check against an NIST traceable digital thermometer measuring the actual Gas temperature (flowing/non-flowing).

  • As a result, the risk of loss to the DIF is proportionally smaller today than in prior years.

  • The temperature so recorded, obtained while Producer’s Gas is being delivered, shall be the applicable flowing Gas temperature for purposes of calculating the actual gas flow.

Related to Gas temperature

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Pressurized gas duster means a pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces such as photographs, photographic film negatives, computer keyboards, and other types of surfaces that cannot be cleaned with solvents. “Pressurized Gas Duster” does not include “Dusting Aid.”

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Produced water means water extracted from the earth from an oil or natural gas production well, or that is separated from oil or natural gas after extraction.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • CO2 means carbon dioxide.

  • Gas means any mixture of hydrocarbons and noncombustible gases in a gaseous state consisting primarily of methane.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.

  • Bottled water means water that is placed in a safety sealed container or package for

  • Recycled water or “reclaimed water” means treated or recycled waste water of a quality suitable for non-potable uses such as landscape irrigation and water features. This water is not intended for human consumption.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Feedstock Gas means natural gas used as a raw material for its chemical properties in creating an end product.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.