Functional Head definition

Functional Head means for the purposes of these Rules, the Manager/Head of Department/Director to whom the employee reports. .
Sample 1Sample 2Sample 3
Functional Head means the Manager, Head of Department or Director to whom the employee is accountable. Directors are accountable to the BAM Group Chairman or the Deputy Chairman (according to the reporting line of the relevant Director).
Sample 1
Functional Head means respective Management Council member or any other person identified by him/her in writing.
Sample 1

Examples of Functional Head in a sentence

  • In case any Functional Head becomes aware of some Material Information about the Company, the said Functional Head would contact any one of the whole-time directors of the Company.

  • In case the employee intends to appear in some examinations or wish to attend some classes while working with the Company, then he/ she is required to obtain prior permission in writing from the Functional Head HCM of the Company by giving full details of course including time frame involved.

  • Senior Management for the purpose of this Code shall mean personnel of the Company who are members of its core management team excluding Board of Directors including members of management one level below the Chief Executive Officer/Managing Director/Whole Time Director/Manager including any Functional Head.

  • Awards from the Reallocation Pool will be made in the discretion of the applicable Operating Group President or Functional Head, except for additions to payouts for Executive Officers, whose additions must be recommended by the CEO and approved by the Compensation Committee.

  • Likewise, the Functional Head Constraint would be valid for certain complementizers in certain languages, but it does not represent an overall tendency.

  • Business Head, Functional Head or Unit Head as defined in the Delegation of Authority Manual.

  • PROCESS OF DISCLOSURES OF MATERIAL INFORMATION In case any Functional Head becomes aware of any material event/information about the Company, then as per Schedule III of the Listing Regulations, the said Functional Head shall inform the Compliance Officer of the Company.

  • For positions above the Associate level, the Functional Head may also form part of the Interviewing Panel.

  • Therefore, a supramedullary diverticulum might be necessary for internal neural arch pneumatization, but might also persist without further internal pneumatization, as in Dicraeosaurus.

  • Scholarship on the paradox of the nondelegation doctrine giving way to pragmatic recognition of the need for agency administration of law, e.g., Lisa Schultz Bressman, Reclaiming the Legal Fiction of Congressional Delegation, 97 VA.


More Definitions of Functional Head

Functional Head means In- charge of a business vertical in the Bank at Corporate Office, Head Office of the Bank or at any other location in India and abroad.
Sample 1Sample 2
Functional Head means an employee of the Company working for specific function and responsible for providing UPSI
Sample 1
Functional Head means the relevant manager, department head or Director to whom the employee is accountable. Directors are accountable to the CEO.
Sample 1
Functional Head means the Manager, Head of Department or Director to whom the employee is accountable. Directors are accountable to the Group CEO: Asia Pacific and the Group CEO: Asia Pacific is accountable to the Group CEO: Investment Management Group and the Group Head of Sales & Client Services.
Sample 1

Related to Functional Head

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Functional Criteria means the criteria set out in clause 27 of this Part C.

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Project Management The individuals appointed by each Party cf. clause 4.1 in the Agreement.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Project Management Unit or “PMU” means the Recipient’s management and Implementation unit referred to in Section I.A.2 of Schedule 2 to this Agreement.

  • Payload means all property to be flown or used on or in a Launch Vehicle.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Hermetically sealed container means a container designed and intended to be secure against the entry of microorganisms and, in the case of low acid canned foods, to maintain the commercial sterility of its content after processing.

  • Scalping means the situation where the Client opens too many positions in CFDs at the same time and closes them for less than five minutes or buying at Bid price and selling at Ask price, so as to gain the Bid/Ask difference.

  • STP means the temperature of fifteen degrees Celsius (15°C) and at a pressure of one hundred and one decimal three two five kilopascals (101.325 kPa).

  • Motorized wheelchair means any self-propelled vehicle designed for, and used by, a handicapped person and that is incapable of a speed in excess of eight miles per hour.

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Project Management Plan means the management plan that (i) sets out a high level workplan to describe the manner in which the Design-Builder will manage the Project, including to address related matters such as traffic management and communications, and (ii) is prepared by or for the Design-Builder and submitted to the Owner;

  • Dormitory means a building used in conjunction with an educational building for living quarters for seven or more students;

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Integrated pest management means careful consideration of all available plant protection methods and subsequent integration of appropriate measures that discourage the development of populations of harmful organisms and keep the use of plant protection products and other forms of intervention to levels that are economically and ecologically justified and reduce or minimise risks to human health and the environment. ‘Integrated pest management’ emphasises the growth of a healthy crop with the least possible disruption to agro-ecosystems and encourages natural pest control mechanisms;

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.