Function Point definition

Function Point or “FP” means a metric that describes a unit of work product suitable for quantifying application software from the end-user’s point of view and based on a weighted sum of the numbers of inputs, outputs, files inquiries and interfaces provided to, or generated by, the applicable software according to the International Function Point User Group (“IFPUG”) standard.
Sample 1Sample 2Sample 3

Examples of Function Point in a sentence

  • The procedure that would be adopted for evaluating Change Requests will be based on the work breakdown method/ Function Point Analysis method or the method mutually agreed upon with the vendor.

  • The offerors approach to providing Certified Function Point Specialists, if required by the State, should be briefly addressed.

  • The change request time estimation would be computed using Function Point Analysis methodology.

  • FP represents the version of the FPA managed by the International Function Point Users Group (IFPUG).FPA was the first FSM method to be proposed in literature ; it was in- troduced by Albrecht of IBM in 1979 to measure a software product size in terms of the number of functions with which the end user was provided in the early development phases, meaning that the size measure was no longer related to the choice of technology adopted.

  • Based on this, we determine the Cost per Function Point, Days per Function Point, and Defects per Function Point, using in each case the size in function points as weighting factor.3.4.2 Estimation Quality FactorThe Estimation Quality Factor (EQF) is a measure of the deviation of a forecast to the actual cost or duration.

  • Stepwise overview of project planning Unit-II SOFTWARE PROJECT PLANNING: Programme management and project evaluation, Project planning objectives, project planning infrastructure, process planning, Selection of an appropriate process model effort estimation models, estimation techniques: Function Point Analysis, COCOMO, Use case point analysis.

  • Amdocs shall be responsible for [**], except as otherwise provided in the Policy and Procedures Manual, provided that nothing in the foregoing shall be interpreted to prevent the application of Section 10.2. To facilitate the calculation of certain Service Levels, Amdocs will implement function point counting procedures according to the International Function Point Users Group (IFPUG) standards as set forth in Schedule F, Attachment D.

  • There are many techniques about that try to attack this problem, such as Function Point Analysis, Story Point Analysis or COCOMO.

  • Savings # 3: System Development ROI Quantity of Tables Function Points Per Table Cost Per Function Point Type of Software Total CostCost Difference (in favor of data driven)400 (If Data Driven)80$400Information$12,800,000$43,008,0001744 (If Process Driven (400 * 4.36)$55,808,000400 (If Data Driven)80$1,000Military$32,000,000$107,520,0001744 (If Process Driven (400 * 4.36)$139,520,000 Estimates exclude hardware, computing infrastructure, travel, testing, documentation, evolution and maintenance.

  • O’Connorc, Francisco Acostad, Francisco Alvareze Additional resources:Wanted: A GPS to Track My Agile Project; ISMA11; Sao Paulo, Brazil; November 18, 2015Implications and Opportunities Relevant to “Agile” Measurement; ISMA10; Charlotte, N.C., April 30, 2015 About the author:Joe Schofield is a Past President of the International Function Point Users Group.

Related to Function Point

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Connection Point means an exit point or an entry point or a bidirectional point identified or to be identified as such in an access contract.

  • Collection Point means the collection point for the Vehicle specified in the Confirmation and/or Rental Agreement;

  • Injection Point means the Electric Interconnection Point.

  • Valuation Point means such time as shall be specified in the relevant Supplement for each Fund.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Inter-connection Point means interface point of renewable energy generating facility with the transmission system or distribution system, as the case may be:

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Network Termination Point (NTP) means the physical point at which a subscriber is provided with access to a public communications network; in the case of networks involving switching or routing, the NTP is identified by means of a specific network address, which may be linked to a subscriber number or name;

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Station Power means energy used for operating the electric equipment on the site of a generation facility located in the PJM Region or for the heating, lighting, air-conditioning and office equipment needs of buildings on the site of such a generation facility that are used in the operation, maintenance, or repair of the facility. Station Power does not include any energy (i) used to power synchronous condensers; (ii) used for pumping at a pumped storage facility; (iii) used in association with restoration or black start service; or (iv) that is Direct Charging Energy. Surplus Interconnection Customer:

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-xxxx environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • financial service supplier means any natural or juridical person of a Party wishing to supply or supplying financial services but the term “financial service supplier” does not include a public entity;

  • Eligible customer-generator means a customer-generator whose net energy metering system for renewable resources, cogeneration, fuel cells, and microturbines meets all applicable safety and performance standards.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Surplus Interconnection Customer means either an Interconnection Customer whose Generating Facility is already interconnected to the PJM Transmission System or one of its affiliates, or an unaffiliated entity that submits a Surplus Interconnection Request to utilize Surplus Interconnection Service within the Transmission System in the PJM Region. A Surplus Interconnection Customer is not a New Service Customer.

  • Rating Point means the V&H coordinates associated with a particular telephone number for rating purposes.

  • Origin Point means the receipt/inception point(s) where Product is received into the System, as such points are specified in Section III of this tariff.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • H-point means the pivot centre of the torso and thigh of the H-point machine when installed in a vehicle seat in accordance with Annex 12. Once determined in accordance with the procedure described in Annex 12, the "H" point is considered fixed in relation to the seat-cushion structure and is considered to move with it when the seat is adjusted.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.