Front structure definition

Front structure means all outer structures of the vehicle except the windscreen, the windscreen header, the A-pillars and structures rearward of these. It therefore includes, but is not limited to, the bumper, the bonnet, wings, scuttle, wiper spindles and lower windscreen frame.
Front structure means all parts of the vehicle including the windscreen, the windscreen header, the A-pillars and all parts of the vehicle forward of these. It therefore includes, but is not limited to, the bonnet, wings, scuttle (cowl), wiper spindles, windscreen and lower windscreen frame.
Front structure means the front part of a vehicle likely to be impacted by a pedestrian when the vehicle collides with the pedestrian at a speed of up to 40 km/h.

Examples of Front structure in a sentence

  • Both vehicles have exactly the same Flat Front structure; the current text of gtr No. 9 exempts the Category 2 version, while the Category 1-1 version is not exempted.

  • Front structure setback no closer than 25 feet from the right-of-way/property line, whichever is more restrictive.

  • They argue that ‘the Reports do not systematically assess the structure and operation of institutional frameworks or policies for dealing with minority groups’ (2003: 16).

  • Potential temperature [◦C] distribution along transect V 55The Arctic Front: structure and dynamicsFig.

  • Front structure in Bosnia and Herzegovina in July 1993 44Figure 5.

  • They estimated the model using the Pseudo Poisson Maximum Likelihood (PPML) technique.

  • Seeks to clarify jurisdiction and provide a procedural roadmap for addressing dilemmas where more than one state is involved, and to enhance communication between courts in different states.

  • The station grid at the Arctic FrontThe Arctic Front: structure and dynamics 51a well-marked front was found over Mohn’s Ridge between 70 and 72◦N (Fig.

  • All overlapped joints of inside are caulked with chloroprene sealant.3.11 Front structure: Front end structure will be composed of one bottom end rail, two corner posts, one top end rail, four corner fittings and an end wall, which are welded together.3.11.1. Bottom end rail: The bottom end rail to be made of a 2.0 mm thick pressed open section steel is reinforced by four internal gussets.

  • For information on the two positions (which are within the same paradigm), see, for example, Guba and Lincoln (1998).


More Definitions of Front structure

Front structure means all outer structures of the vehicle except the windscreen, the windscreen header, the A-pillars and structures rearward of these. It therefore includes, but is not limited to, the bumper, the bonnet, wings, scuttle, wiper spindles and lower windscreen frame. Copied from gtr, § 3.16. See also Council document, Annex I, § 1.5

Related to Front structure

  • Permanent structure means a permanent building or permanent structure that is anchored to a permanent foundation with an impermeable floor, and that is completely roofed and walled (new structures require a door or other means of sealing the access way from wind driven rainfall).

  • utility structure means transmission and distribution lines

  • Water control structure means a structure within, or adjacent to, a water, which intentionally or coincidentally alters the hydraulic capacity, the flood elevation resulting from the two-, 10-, or 100-year storm, flood hazard area limit, and/or floodway limit of the water. Examples of a water control structure may include a bridge, culvert, dam, embankment, ford (if above grade), retaining wall, and weir.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.