Fluoropolymer definition

Fluoropolymer means a polymer containing carbon-fluorine bonds, including perfluorinated fluoropolymers (i.e., a hydrocarbon in which all hydrogen atoms have been replaced by fluorine atoms), partially fluorinated fluoropolymers, and Copolymers of a fluoromonomer with one or more fluorinated or non-fluorinated co-monomers.
View Source

Examples of Fluoropolymer in a sentence

  • Fluoropolymer shall be ▇▇▇▇▇ ▇▇▇, 2-coat for exterior applications and fluropolymer, ▇▇▇▇▇ ▇▇▇, 2-coat or baked enamel for interior applications.

  • More recently, a commercially accessible gas-permeable membrane (Teflon Amorphous Fluoropolymer AF-2400) [16] has been marketed that has excellent permeability for small molecular gases and good solvent resistance for manufacturing highly efficient gas addition devices, most often applied in a tube-in-tube coil configuration.

  • If uniform visual appearance is required, Seller recommends that pre-painted Siliconized Polyester Finish, Straight Polyester Finish or PVDF Fluoropolymer Finish panels be used in lieu of Galvalume® Plus.

  • Thermoset Fluoropolymer paint coating, in standard color, will not fade, chalk, blister, peel or erode beyond performance standards per AAMA 2605 for the applicable coverage period listed in section 5.a.ii.

  • Fluoropolymer Coating: Multiple coat as specified for sheet metal system, thermally cured, conforming to AAMA 2605.

  • For Communication, remote control and fire protection signaling cable in air plenum and under 300 volts not in a conduit shall be Fluoropolymer insulated cable approved by UL and NYC.

  • Fluoropolymer finish containing not less than 70 percent PVDF resin by weight in colorcoat.

  • Fluoropolymer 2-coat Kynar This information is provided for reference only and should not be construed as a liability on AVAdek’s part.

  • The current Cleaning and Maintenance Guide for Fluoropolymer Coil and Extrusion Coatings may be found at: ▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇.▇▇▇/Static/Cleaning (b) Customer’s alteration, modification, and/or repair in any way of the Material following the date that the installation of the Material is complete.

  • Fluoropolymer finish containing not less than 70 percent PVDF resin by weight in color coat.