Flow Test definition

Flow Test means a test to measure a Reservoir’s ability of flowing Petroleum to the surface, the percentage or volume of water (if any) in the Reservoir, liquid and gas gravities, the shut-in pressure prior to testing and other technical data.
Sample 1Sample 2Sample 3
Flow Test means a test to measure a Reservoir‟s ability to flow Petroleum, the percentage or volume of water (if any) in the Reservoir, liquid and gas gravities, establish shut-in pressure prior to testing and other technical data.
Sample 1
Flow Test means is a process of identifying critical reservoir properties used for geothermal exploration to estimate the flow rate and capacity of a geothermal reservoir and conducted after drilling has been done.
Sample 1Sample 2

Examples of Flow Test in a sentence

  • If the NYCA is not resource limited as determined by the NYCA Free Flow Test, then the ISO will examine constrained transmission interfaces, using the Binding Interface Test.

  • If the NYCA is not resource limited as determined by the NYCA Free Flow Test, then the ISO will examine constrained transmission interfaces, using the Binding Interface Test.38.22.1.3.1 The ISO will provide output results of the reliability simulation program utilized for the RNA that indicate the hours that each interface is at limit in each flow direction, as well as the hours that coincide with a loss of load event.

  • A cold flow performance measurement which meets the ASTM D 975 tenth percentile minimum ambient air temperature charts and maps by either ASTM Standard Test Method D 2500 (Cloud Point) or ASTM Standard Test Method D 4539 (Low Temperature Flow Test, LTFT).

  • If the reliability criterion is not met after the LCRdef has been addressed, that is an LOLE > 0.1, then a NYCA Free Flow Test will be conducted to determine if NYCA has sufficient resources to meet an LOLE of 0.1.

  • Low Temperature Operability - A cold flow performance measurement which meets the most recent ASTM D 975-12a tenth percentile minimum ambient air temperature charts and maps for New Hampshire by either the most recent ASTM Standard Test Method D 2500 (Cloud Point), or most recent ASTM Standard Test Method D 4539 (Low Temperature Flow Test, LTFT).

  • It is also recommended that you undertake a Covid-19 Rapid Lateral Flow Test within two days of the meeting.

  • Low Temperature Operability - A cold flow performance measurement which meets the most recent ASTM D 975-15 tenth percentile minimum ambient air temperature charts and maps for New Hampshire by either the most recent ASTM Standard Test Method D 2500-11 (Cloud Point), or most recent ASTM Standard Test Method D 4539-10 (Low Temperature Flow Test, LTFT).

  • Test shall include a "System Operating Flow Test", from zero to 100% design flow rate under specified suction and net delivery pressure conditions.

  • All those attending will be asked to wear a face covering (unless exempt) and are encouraged to take a Lateral Flow Test before attending.

  • NYCA Free Flow Test: A NYCA unconstrained internal transmission interface test, performed by the ISO to determine if a Reliability Need is the result of a statewide resource deficiency or a transmission limitation.


More Definitions of Flow Test

Flow Test means a test to measure a Reservoir’s ability to flow Petroleum, the percentage or volume of water (if any) in the Reservoir, liquid and gas gravities, establish shut-in pressure prior to testing and other technical data.
Sample 1

Related to Flow Test

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Cannabis testing facility means an entity registered by

  • Borrowing Base Test means as of any date, a determination that (a) the lesser of (i) the Borrowing Base and (ii) the Facility Amount shall be equal to or greater than (b) the Advances Outstanding.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Collateral Quality Test means a test that is satisfied if, as of any date of determination, in the aggregate, the Collateral Loans owned (or in relation to a proposed acquisition of a Collateral Loan, both owned and proposed to be owned) by the Borrower satisfy each of the tests set forth below, calculated in each case in accordance with Section 1.3:

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.