Flow control device definition

Flow control device means a design element that manipulates the air flow around an object by changing the air flow characteristics in order to reduce the pressure force exerted on the vehicle.
Flow control device means a device installed upstream of or within the interceptor, having an orifice that controls the rateof flow through the flow-based grease interceptor.
Flow control device means a device specially designed to equalize the outflow elevation of effluent from a distribution box, typically a rotating pipe cap provided with an off center outflow orifice that can adjust the flow line by rotation of the cap.

Examples of Flow control device in a sentence

  • Flow control device: Grease traps shall be equipped with a device to control the rate of flow through the unit.

  • Flow control device stops responding due to mechanical problemsThe FMEA tables are presented in Appendix I.

  • From Flow control device evaluation for an internal flow with an adverse pressure gradient, S.

  • A number of SuDS components are proposed as part of a surface water drainage strategy for the site, specifically:o Green roofs.o Pervious paving.o Attenuation storage.o Flow control device to limit rate of discharge from site.

  • It should be noted that this type of fraud, due to customer awareness is on the decline.

  • Consequently, our approach to challenging behaviour may be differentiated to cater to the needs of the pupil (see section 6 below).

  • Flow control device removed and outfall pipeline upsized and relief overflow pipeline installed Aust VillageSurface water run-offand restricted rhine flow Main rhine highway and field culverts upgraded.

  • Flow control device, capable of providing a controlled, simulated leak flow rate of 100 mL/min.

  • Avoid misuse + delivery side leakage of compressed air, avoid long delivery system.2. Adopt centralized system of compressed air.3. Avoid running of compressor during low protection period.Avoid cooling water re-circulation.4.Pump- Same as motor+ Flow control device (Van control)1.

  • See note 13 Surface box Pre-cast concrete shaft rings (v.f.A) Flow Control Device's operating steel rope Manhole access See note 8 Ladder or double steps at 250/300 centres vertically (v.f.A) Flow Control Device's operating steel rope Flow 450 Flow control device Surface box Surface box Concrete surround to top design water level Penstock spindle secured to chamber with securing brackets at centres no greater than 3m By-pass penstock.


More Definitions of Flow control device

Flow control device means an approved fitting placed in the water line at a service location to restrict the maximum rate that water can flow from the Public Water System into a Private Water System.

Related to Flow control device

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • Control device means equipment (such as an incinerator or carbon adsorber) used to reduce, by destruction or removal, the amount of air contaminants in an air stream prior to discharge to the ambient air.

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Stationary beam radiation therapy means radiation therapy without displacement of one or more mechanical axes relative to the patient during irradiation.

  • Certified cabinet x-ray system means an x-ray system that has been certified in accordance with 21 CFR 1010.2 as being manufactured and assembled pursuant to the provisions of 21 CFR 1020.40.

  • Secondary dose monitoring system means a system which will terminate irradiation in the event of failure of the primary dose monitoring system.

  • Assisted amusement device means an amusement device, skill device, or ride

  • Assistive technology device means any item, piece of equipment, or product system that is used to increase, maintain, or improve the functional capacities of a child with a disability.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a preselected number of dose monitor units have been delivered.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Controlled substance analog means a substance the chemical structure of which is substantially

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Acceptable earned value management system means an earned value management system that generally complies with system criteria in paragraph (b) of this clause.

  • Eligible production company means that term as defined under section 455 of the Michigan business tax act, 2007 PA 36, MCL 208.1455.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Cephalometric device means a device intended for the radiographic visualization and measurement of the dimensions of the human head.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Earned value management system means an earned value management system that complies with the earned value management system guidelines in the ANSI/EIA-748.

  • Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Control apparatus means any device which prevents or controls the emission of any air contaminant directly or indirectly into the outdoor atmosphere.