Flat Sheet UPE Membranes definition

Flat Sheet UPE Membranes means rollstock UPE Membranes typically less than 300 microns in sheet thickness including both phobic and philic Membranes as produced at the Premises pursuant to the Old Agreement immediately prior to the Effective Date, or as modified as provided in this Agreement.
Sample 1Sample 2Sample 3
Flat Sheet UPE Membranes means (i) rollstock UPE Membranes typically less than 300 microns in sheet thickness including both phobic and philic Membranes, and (ii) polypropylene sterilizing membrane (Solvex), each as produced by Millipore at the Premises immediately prior to the Separation Date, or as modified as provided in this Agreement.
Sample 1Sample 2Sample 3
Flat Sheet UPE Membranes means the microporous membranes produced from an ultrahigh molecular weight polyethylene material by a melt cast process in rollstock form of typically less than 300 microns in sheet thickness listed on Exhibit A to this Agreement including those designated on Exhibit A as “EMD Millipore Flat Sheet UPE Membranes” and “Entegris Flat Sheet UPE Membranes” all as heretofore produced at the Premises pursuant to the Fourth Agreement immediately prior to the Effective Date and as may be developed or refined thereafter.
Sample 1

Examples of Flat Sheet UPE Membranes in a sentence

  • According to industry sources, in 2005, Bakkals and markets were the leaders in food sales in 2005 with 43.5 percent market share, followed by small supermarkets (14 percent), supermarkets (13 percent), large supermarkets (10.5 percent), and hypermarkets (8percent).

  • I voted in the charter election specifically on this issue and feel very passionately that these changes need to be made for the health of the city.

  • For Flat Sheet UPE Membranes produced at the New Entegris Facility (other than the rolls for feasibility evaluation as described and priced above), prices shall as set forth on Annex 3 for the Term of this Agreement.

  • Entegris agrees to sell to Millipore Flat Sheet UPE Membranes, in the amounts contained in Millipore’s Releases, at all times during the Term and, in the event this Agreement is terminated by Entegris pursuant to Section 6.2 (iii), at all times following the Term through and including December 31, 2012 or until any event prior thereto that would have given rise to Entegris’ right to terminate this Agreement pursuant to Section 6.2 (i) or (ii).

  • The parties acknowledge that all Flat Sheet UPE Membranes will be produced at the New Entegris Facility after June 30, 2012.

  • Delivery terms for all EMD Millipore Flat Sheet UPE Membranes delivered to EMD Millipore hereunder will be FOB 00 Xxxxx Xxxx, Bedford, MA.

  • The parties acknowledge that all Flat Sheet UPE Membranes will be produced at the New Entegris Facility after December 31, 2010.

  • Entegris shall be responsible for funding required capital improvements to the Entegris Equipment for production of Flat Sheet UPE Membranes.

  • However, we present an algorithm that achieves this runtime using only O(U ) RAM, where U is the number of extracted units, thus making theexact computation feasible.

  • In addition EMD Millipore agrees to use its commercially reasonable efforts to discontinue the processing of other membrane currently processed on the Film 1 Annealing Line by the Target date of March 31, 2014 and to devote the Film 1 capacity created thereby to Entegris for the manufacture of Flat Sheet UPE Membranes in accordance with the Supplement.

Related to Flat Sheet UPE Membranes

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Fabrication means making up data or results and recording or reporting them.

  • Construction Plant means appliances, machinery with necessary supply to up keep and maintenance of the works or temporary works but dose not include materials or other things intended to form part of the permanent work.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • The Works/Project means the works to be executed or done under this contract.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Digital audio-visual works which means a series of related images which, when shown in succession, impart an impression of motion, together with accompanying sounds, if any;

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.