Flanges definition

Flanges means collars, discs or plates between which wheels are mounted and are referred to as adaptor, sleeve, or back up type. See paragraph (c) of 1910.215 for full description.
View Source

Examples of Flanges in a sentence

  • Electrical EEC Harnesses - Fan and Core, Nose Spinner, PART - Drains, If Intertwined With Engine parts, Airframe Accessory Mounting Pads and Drives, PART - Brackets on Working Flanges for attachment of Aircraft Equipment and EBU, PART - IDG Piping, where Intertwined with Engine Parts.

  • Flanges for hose connections should be at or near the Vessel’s dockside rail.

  • Flanges shall be provided at the end of pipes or special where sluice valves, blank flanges, tapers, etc., have to be introduced.

  • Flanges for hose connection should be at or near the Vessel’s dockside rail and should comply with OCIMF recommendations and US Coast Guard regulations.

  • Flanges shall be ductile iron and shall be threaded-on flanges conforming to ANSI/AWWA C115/A21.15 or cast-on flanges conforming to ANSI/AWWA C110/A21.

  • Flanges shall be provided with all necessary nuts, bolts, washers and gaskets, as specified herein.

  • Flanges, blind flanges and dished ends fabricated as per IS 2062/ A515 Gr. 60 are acceptable.

  • Electrical EEC Harnesses—Fan and Core, Nose Spinner, PART—Drains, if intertwined with Engine parts, Airframe Accessory Mounting Pads and Drives, PART—Brackets on Working Flanges for attachment of Aircraft Equipment and EBU, PART—IDG Piping, where intertwined with Engine Parts.

  • AWWA C207 - Steel Pipe Flanges for Waterworks Service, Sizes 4 Inch Through 144 Inch.

  • AWWA C115 - Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges.

Related to Flanges

  • Tank means a stationary device, designed to contain an accumulation of hazardous waste which is constructed primarily of non-earthen materials (e.g., wood, concrete, steel, plastic) which provide structural support.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Stations means the Owned Stations and the Contract Stations.

  • Sump means any pit or reservoir that meets the definition of tank and those troughs/trenches connected to it that serve to collect hazardous waste for transport to hazardous waste storage, treatment, or disposal facilities; except that as used in the landfill, surface impoundment, and waste pile rules, “sump” means any lined pit or reservoir that serves to collect liquids drained from a leachate collection and removal system or leak detection system for subsequent removal from the system.