Finished Grade Level definition

Finished Grade Level means the average level of proposed or finished ground abutting the building or structure at the exterior walls.
Sample 1
Finished Grade Level means the average elevation of the finished surface of the ground abutting the external walls of the Building or structure, exclusive of any embankment in lieu of steps. Commented [DS2]: These definitions do not appear anywhere else in this By-law
Sample 1
Finished Grade Level means the mean elevation of the finished surface of the ground abutting the external wall of the building or structure nearest to a public street, but shall not include any embankment in lieu of steps.
Sample 1

Examples of Finished Grade Level in a sentence

  • Minimum depth of foundation for all structures shall be from the Finished Grade Level (FGL) where cutting has been done and shall be from the Natural Grade Level (NGL) where filling has been done at respective location, for achieving the required FGL.

  • The project is an explicit part of the JCSS and supports all four of the programmatic JCSS areas.

  • The Finished Grade Level (FGL) of the proposed plant shall be fixed with reference to the highest flood level (HFL) and surrounding ground profile at proposed site to avoid flooding of plant site.

  • Minimum depth of foundation for all structures shall be from the Finished Grade Level (FGL) where cutting has been done and shall be from the Natural Grade Level (NGL) where filling has been done at respective location, for achieving the required FGL ( 200mm above the concrete cellar top of a nearby well which possesses MSL).

  • Ground water table shall be considered at Plant Finished Grade Level for design of foundations and all underground structures.

  • All plots shall be fenced to a minimum height of 2.4m measured from Finished Grade Level to the top of the fence.

  • The Finished Grade Level (FGL) of the proposed project site should be 186.309 meters above from mean sea level.

  • The Finished Grade Level (FGL) of the plot(s) shall be minimum 0.5m lower than the adjacent QP Road level (existing or future).

  • This informal practical advice note only covers practical issues relating directly to urgent sampling and should not be used as a guide to other aspects of dealing with the outbreak.

  • Minimum depth of foundation shall be 1m below FGL for excavated area and 1.5m below NGL for filling area.6.2. Foundation and Underground structuresThe depth of all the foundations from design consideration shall be reckoned from the NGL (Natural Ground Level) or FGL (Finished Grade Level) whichever is lower.Type of foundation system, i.e., isolated, strip or raft shall be decided based on the loading arrangement, load intensity and soil strata.


More Definitions of Finished Grade Level

Finished Grade Level. - Finished Grade Level means the elevation of the finished grade of the ground adjacent to a building or structure.
Sample 1
Finished Grade Level means the final elevation of the ground surface after man-made alterations, such as grading, grubbing, filling, or excavating, have been made on the ground surface.
Sample 1
Finished Grade Level. - shall mean the average elevation of the finished surface of the ground abutting the external walls of the building or structure, exclusive of any embankment in lieu of steps.
Sample 1Sample 2

Related to Finished Grade Level

  • Finished grade means the grade upon completion of the fill or excavation.

  • Established Grade means that grade established by the City for the particular area in which a sidewalk is to be constructed.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Minimum Level (ML means the concentration at which the entire analytical system must give a recognizable signal and an acceptable calibration point. The ML is the concentration in a sample that is equivalent to the concentration of the lowest calibration standard analyzed by a specific analytical procedure, assuming that all the method-specified sample weights, volumes and processing steps have been followed.

  • Licensed Level means a) when referenced in the context of a Named User, the quantity of Metric for which each individual Named User category and type is licensed -and- b) when referenced in the context of a Package, the quantity of Metric for which each individual Package is licensed; and

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Passing grade means work of such character that credit would be entered on the records were the semester to close at that time.

  • Poverty level means the annual family income for a family unit of a particular size, as specified in the poverty guidelines updated annually in the Federal Register by the U.S. Department of Health and Human Services.

  • Floor Level means that stage of construction which in the completed building would constitute the walking surface of the particular floor level referred to in the table of payments.

  • Initial Level means, in respect of an Index, the level specified as such in the applicable Issue Terms.

  • Maximum contaminant level goal or “MCLG” means the maximum level of a contaminant in drinking water at which no known or anticipated adverse effect on the health of persons would occur, and which allows an adequate margin of safety. MCLGs are nonenforceable health goals.

  • Lowest Adjacent Grade (LAG means the elevation of the ground, sidewalk or patio slab immediately next to the building, or deck support, after completion of the building.

  • RBC level means an insurer's company action level RBC, regulatory action level RBC, authorized control level RBC, or mandatory control level RBC where:

  • authorized control level RBC means the number determined under the risk-based capital formula in accordance with the RBC instructions;

  • Pricing Level refers to the determination of which of Level I, Level II, Level III, Level IV, Level V or Level VI applies at any date.

  • Latest Level means, in respect of an Inflation Index, the latest level of such Inflation Index (excluding any "flash" estimates) published or announced by the relevant Inflation Index Sponsor prior to the month in respect of which the Substitute Index Level is being determined.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Severity Level means the actual impact of a Defect on a user’s operational environment as further described in the table below.

  • Pricing Level IV means any time when (i) no Event of Default has occurred and is continuing, (ii) the Senior Debt Rating is BBB- or higher by S&P or Baa3 or higher by Moody’s and (iii) Pricing Levels I, II and III do not apply.

  • Working level (WL) means any combination of short-lived radon daughters in 1 liter of air that will result in the ultimate emission of 1.3E+5 MeV of potential alpha particle energy. The short-lived radon daughters are—for radon-222: polonium-218, lead-214, bismuth-214, and polonium-214; and for radon-220: polonium-216, lead-212, bismuth-212, and polonium-212.

  • Index Level means, in respect of any day and subject to Adjustment Provisions: (a) in respect of an Index(other than a Multiple Exchange Index), the closing level of such Indexat the Valuation Time on such day; and (b) in respect of an Index that is a Multiple Exchange Index, the official closing level of the Index on such day at the Valuation Time as calculated and published by the Index Sponsor each as rounded up to four decimal places (with 0.00005 being rounded up), allas determined by the Calculation Agent.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Base Level means the level of the Index (excluding any flash estimates) published or announced by Eurostat (or any successor entity which publishes such index) in respect of the month which is 12 calendar months prior to the month for which the Substitute Index Level is being determined;

  • Trigger Level means with respect to an Index, the level specified as such in Annex 1 with respect to such Index