Final Maintenance definition

Final Maintenance means the work to be performed by Lessee in order to cause the Aircraft to meet the requirements of this Schedule 1, including Annex 1 hereto.
Final Maintenance means prior to the return of the Aircraft on the last day of the Lease Term, the completion of the next scheduled heavy maintenance check ("C" Check or above and, if applicable, multiples of such checks falling due within a "C" Check maintenance interval) in respect of the Aircraft under the Approved Maintenance Program (which check shall incorporate all lower-level checks and any special repair items or special inspections (including, without limitation, all applicable AD's that are required to be accomplished in accordance with the terms of this Lease, mandatory SB's and CPCP items) as well as inspections that have a frequency less than a "C" Check and all cleaning and refurbishment that would be a normal part of the Approved Maintenance Program were the Aircraft to continue in commercial passenger service by Lessee.
Final Maintenance means the work referred to in paragraph 1(m) of Schedule 9 (Redelivery Condition) and the other maintenance requirements set out in that Schedule. Finance Documents means:

Examples of Final Maintenance in a sentence

  • Draft Guidelines then become either Final Guidelines or Final Maintenance Guidelines, as designated in the Draft Guidelines Ballot.

  • A Draft Guideline Ballot will clearly indicate whether it is proposing a Final Guideline or a Final Maintenance Guideline.

  • If no Exclusion Notices are filed during the Review Period with respect to a Draft Guideline Ballot, then the results of the Initial Vote are automatically deemed to be final and approved, and Draft Guidelines then become either Final Guidelines or Final Maintenance Guidelines, as designated in the Draft Guidelines Ballot.

  • Final Maintenance Inspection: 30 days prior to the end of the maintenance period.

  • If a ballot is proposed to amend the same section of the Final Guidelines or the Final Maintenance Guidelines as one or more previous ballot(s) that has/have not yet been finally approved, the newly proposed ballot must include information about, and a link to, any such previous ballot(s), and may include provisions to avoid any conflicts relating to such previous ballots.

  • The Joint Board shall pay any undisputed amounts, less any Losses that have accrued as of the date of the Final Maintenance Payment, the costs to complete or remediate uncompleted Work or Nonconforming Work and any other deductions permitted under Section 6.4 above, within 30 Days after its approval of such amounts on the application for the Final Maintenance Payment, but not earlier than the end of the Maintenance Term.

  • The provisions of Sections 4.4.2 and 6.4, above, shall apply with respect to the Final Maintenance Payment.

  • Final Guidelines and Final Maintenance Guidelines developed by a CWG do not need to be approved by the Forum at large.

  • If the Draft Guideline Ballot is proposing a Final Maintenance Guideline, such ballot will include a redline or comparison showing the set of changes from the Final Guideline section(s) intended to become a Final Maintenance Guideline, and need not include a copy of the full set of guidelines.

  • DivTel will become the single source for all State and many local governments’ wireless telecommunications needs, assuming responsibility for managing and allocating costs among the SUNCOM Clients.


More Definitions of Final Maintenance

Final Maintenance means prior to the return of the Aircraft on the last day of the Lease Term, the completion of the next scheduled heavy maintenance check ("C" Check [Amended and Restated Lease Agreement] or above and, if applicable, multiples of such checks falling due within a "C" Check maintenance interval) in respect of the Aircraft under the Approved Maintenance Program (which check shall incorporate all lower-level checks and any special repair items or special inspections (including, without limitation, all applicable AD's that are required to be accomplished in accordance with the terms of this Lease, Required SB's and CPCP items) as well as inspections that have a frequency less than a "C" Check and all cleaning, and refurbishment that would be a normal part of the Approved Maintenance Program were the Aircraft to continue in commercial passenger service by Lessee.
Final Maintenance means the work to be performed by Xxxxxx in order to cause the Aircraft to meet the requirements of Schedule 4 to the Aircraft Lease Shared Terms. “Financing Acknowledgement,” if any, is defined in Section 1.1 of the Aircraft Lease Agreement.

Related to Final Maintenance

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Operation and Maintenance Expenses or ‘O&M expenses' means the expenditure incurred on operation and maintenance of the project, or part thereof, and includes the expenditure on manpower, repairs, spares, consumables, insurance and overheads;

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Preventive Maintenance means that maintenance, performed on a scheduled basis by the Contractor, which is designed to keep the Equipment in proper operating condition.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Operation and Maintenance Costs means the costs of:

  • Deferred Maintenance means improvements necessary for continued operations which do not improve productivity or alter the process technology.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • maintenance order , in relation to a court, means an order made by a court —

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Software Maintenance means the process of modifying software after delivery to correct faults, improve performance or other attributes, or adapt to a changed environment. (Reference ISO/IEC 14764:2006, as amended or superseded.) Software maintenance does not include any customization or configuration.

  • Operations and maintenance means a project delivery method in which the District enters into a single contract for the routine operation, routine repair, and routine maintenance of an infrastructure facility.

  • Corrective Maintenance means the maintenance which is required when an item has failed or worn out, to bring it back to working order, which may also include those services necessary to partially restore, renew or strengthen an existing Department facility or system, following damage caused by use or normal wear and tear.

  • Maintenance Costs means parts and materials, sublet and labour costs of a qualified licensed mechanic for the maintenance of the Revenue Service Vehicles, but shall not include costs associated with interior and exterior transit advertising signs and non-mechanical servicing of Revenue Service Vehicles such as fuelling, clearing fareboxes, cleaning and painting wheel rims, vehicle washing and other work performed by a serviceman; and,

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.

  • Preventative Maintenance means the routine, customary or regular course of procedure related to the care or upkeep of an existing Department facility or system, which may also include inspection services provided as part of a preventative maintenance program. Preventive maintenance is conducted to keep equipment working and/or extend the life of the equipment.

  • Maintenance Schedule means a document which describes the specific scheduled maintenance tasks and their frequency of completion necessary for the safe operation of those aircraft to which it applies;

  • Maintenance Window means the weekly maintenance windows for the Cloud Service identified in xxxxx://xxxxxxx.xxx.xxx/maintenance-windows. SAP may update the Maintenance Window from time to time in accordance with the Agreement.

  • Maintenance Outage means NERC Event Type MO, as set forth in attached Exhibit B, and includes any outage involving ten percent (10%) of the Facility’s Net Output that is not a Forced Outage or a Planned Outage.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Period of Maintenance means the specified period of maintenance from the date of completion of the works as certified by the Engineer.