Final assembly definition

Final assembly means all oper- ations involved in the assembly of a ve- hicle, performed at the final assembly point including but not limited to as- sembly of body panels, painting, final chassis assembly, trim installation, ex- cept engine and transmission fabrica- tion and assembly and the fabrication of motor vehicle equipment compo- nents produced at the same final as- sembly point using forming processes such as stamping, machining or mold- ing processes.
Final assembly means the processby which a manufacturer produces a new clean vehicle at, or through the use of, a plant, factory, or other place from which the vehicle is delivered to a dealer or importer with all component parts necessary for the mechanical operation of the vehicle included with the vehicle, whether or not the component parts are permanently installed in or on the vehicle. To establish where final assembly of a new clean vehicle occurred for purposes of the requirement in section 30D(d)(1)(G) that final assembly of a new clean vehicle occur within North America, the taxpayer may rely on the following information:
Final assembly. , means a finished or assembled on site assembly of a fan that contains all the elements to convert electric input power into fan air power without the need to add more parts or components;

Examples of Final assembly in a sentence

  • Final assembly of the vehicle or equipment described in this paragraph has taken place in the United States.If buses or other rolling stock (including train control, communication and traction power equipment) are being procured, the appropriate certificate as set forth below shall be completed and submitted by each Bidder in accordance with the requirements.

  • Final assembly of the vehicle or equipment described in this paragraph has taken place in the United States.If buses or other rolling stock (including train control, communication and traction power equipment) are being procured, the appropriate certificate as set forth below shall be completed and submitted by each proposer in accordance with the requirements.

  • Final assembly of a product may occur outside of the United States of America provided no further manufacturing process takes place.

  • Final assembly of the vehicle or equipment described in this paragraph has taken place in the United States.If buses or other rolling stock (including train control, communication and traction power equipment) are being procured, the appropriate certificate as set forth below shall be completed and submitted by each Proposers in accordance with the requirements.

  • Final assembly of a product may occur outside of the United States of America provided no further manufacturing processes take place.

  • Final assembly of rolling stock must occur in the United States and rolling stock must contain the required domestic content, as set forth in the 49 USC Section 5323(j)(C)(2), as amended by Section 3011 of the Fixing America’s Surface Transportation (FAST) Act.

  • Definitions Final assembly factory: Factory where the final assembly of the certified product takes place.

  • Final assembly of these components will take place in Fort Worth.

  • Final assembly is the creation of the end product from individual ele- ments brought together for that pur- pose through application of manufac- turing processes.

  • Final assembly is the substantial transformation of the components and subcomponents into the end product.


More Definitions of Final assembly

Final assembly means a finished or assembled on-site assembly of a fan that contains all the elements to convert electric energy into fan gas power without the need to add more parts or components;
Final assembly. The packaging of an item in a studio so that is ready for broadcast, exclusive of top and tail. A216 A217

Related to Final assembly

  • National Assembly (“Cynulliad Cenedlaethol”) means the National Assembly for Wales;

  • General Assembly means the General Assembly of the United Nations.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Assembly means the Assembly of Heads of State and Government of the African Union;

  • Tube housing assembly means the tube housing with tube installed. It includes high-voltage and/or filament transformers and other appropriate elements when such are contained within the tube housing.

  • the Assembly means the National Assembly for Wales;

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Fabrication means making up data or results and recording or reporting them.

  • Tooling means collectively all tooling, dies, test and assembly fixtures, gauges, jigs, patterns, casting patterns, cavities, molds, documentation including engineering specifications and test reports, together with all appurtenances, accessions, attachments, parts, substitutions, replacements and accessories, and all returnable dunnage (racks, containers, bins, etc.) used or useable by Supplier in connection with its manufacture, assembly and/or transport of the Component Parts for a Customer.

  • Meter Installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Electrical chassis means a set made of conductive parts electrically linked together, whose potential is taken as reference.

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Service Component means certain enabling Software, hardware peripherals and associated documentation which may be separately provided by Symantec as an incidental part of a Service.

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Installation Works means, as the context so requires,

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Final Asset Status Report with respect to any Specially Serviced Mortgage Loan, means each related Asset Status Report, together with such other data or supporting information provided by the applicable Special Servicer to the Subordinate Class Representative, in each case prepared in connection with the workout or liquidation of such Specially Serviced Mortgage Loan and which, in any event, will not include any Privileged Information; provided that no Asset Status Report shall be considered to be a Final Asset Status Report unless, during a Subordinate Control Period, the Subordinate Class Representative has either finally approved of and consented to the actions proposed to be taken in connection therewith, or has exhausted all of its rights of approval or consent, or has been deemed to approve or consent to such action. Each of the Subordinate Class Representative (during any Collective Consultation Period) and the Trust Advisor (during any Collective Consultation Period and any Senior Consultation Period) will be entitled to consult on a non-binding basis with the applicable Special Servicer and propose possible alternative courses of action and provide other feedback in respect of any Asset Status Report, and the applicable Special Servicer shall consider such alternative courses of action and any other feedback provided by the Subordinate Class Representative and/or the Trust Advisor, as applicable. The applicable Special Servicer may revise the Asset Status Reports as it deems reasonably necessary in accordance with the Servicing Standard to take into account any input and/or recommendations of the Subordinate Class Representative and/or the Trust Advisor. Consultation with the Trust Advisor shall occur in the manner provided in Sections 3.28(f) and 3.28(h). During any Senior Consultation Period, the Trust Advisor will be entitled to consult on a non-binding basis with the applicable Special Servicer and propose possible alternative courses of action and provide other feedback in respect of any Asset Status Report, and the applicable Special Servicer shall consider such alternative courses of action and any other feedback provided by the Trust Advisor. The applicable Special Servicer may revise the Asset Status Reports as it deems reasonably necessary in accordance with the Servicing Standard to take into account any input and/or recommendations of the Trust Advisor. The interaction with the Trust Advisor shall occur in the manner provided in Sections 3.28(f) and 3.28(h).

  • Commissioning means the process for determining the need for and for obtaining the supply of healthcare and related services by the Trust within available resources.

  • Electrical cleaner means a product labeled to remove heavy soils such as grease, grime, or oil from electrical equipment, including, but not limited to, electric motors, armatures, relays, electric panels, or generators. Electrical Cleaner does not include “General Purpose Cleaner,” “General Purpose Degreaser,” “Dusting Aid,” “Electronic Cleaner,” “Energized Electrical Cleaner,” “Pressurized Gas Duster,” “Engine Degreaser,” “Anti-Static Product,” or products designed to clean the casings or housings of electrical equipment.

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Original Assessed Value means zero dollars ($284,400), the taxable assessed value of the Developer Property as of March 31, 2020 (April 1, 2019), provided, however that in the event that a City revaluation occurs and results in an increase or decrease of any Developer Property that was included as a part of the initial Original Assessed Value as of April 1, 2019, the Original Assessed Value then in effect shall be increased or decreased by a like amount and such adjusted Original Assessed Value shall thereafter (subject to another City revaluation) be the Original Assessed Value for the purposes of this Agreement.

  • Port Cargo Handling Equipment means rubber-tired gantry cranes, straddle carriers, shuttle carriers, and terminal tractors, including yard hostlers and yard tractors that operate within ports.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.