Filling ratio definition
Filling ratio means the ratio of the mass of gas to the mass of water at 15 °C that would fill completely a pressure receptacle fitted ready for use;
Filling ratio means the ratio of the mass of gas to the mass of water at 15 °C that would fill completely a
Filling ratio means the ratio of the mass of liquefied gas in a tank or cylinder to the mass of water that the tank or cylinder will hold at a temperature of 15°C;
More Definitions of Filling ratio
Filling ratio means the ratio of the weight of a liquefiable gas introduced in the cylinder to the weight of the water that the cylinders will hold at 15°C;
Filling ratio means the ratio of the mass of gas to the mass of water at 15° C that would fill completely a pressure receptacle fitted ready for use (capacity); Filling ratio (cargo tank): Where a filling ratio is given for a cargo tank, it refers to the percentage of the volume of the cargo tank which may be filled with liquid during loading; Fixed tank means a tank having a capacity of more than 1,000 litres which is permanently attached to a vehicle (which then becomes a tank-vehicle) or to a wagon (which then becomes a tank-wagon) or is an integral part of the frame of such vehicle or wagon; Flame arrester means a device mounted in the vent of part of an installation or in the interconnecting piping of a system of installations, the purpose of which is to permit flow Official Journal of the European Communities No. L 23 of 28 January 2000, p.57. but prevent the propagation of a flame front. This device shall be tested according to the European standard EN 12 874 (1999); Flame arrester plate stack means the part of the flame arrester the main purpose of which is to prevent the passage of a flame front; Flame arrester housing means the part of a flame arrester the main purpose of which is to form a suitable casing for the flame arrester plate stack and ensure a mechanical connection with other systems; Flammable component (for aerosols) means flammable liquids, flammable solids or flammable gases and gas mixtures as defined in Notes 1 to 3 of sub-section 31.1.3 of Part III of the Manual of Tests and Criteria. This designation does not cover pyrophoric, self-heating or water-reactive substances. The chemical heat of combustion shall be determined by one of the following methods ASTM D 240, ISO/FDIS 13943: 1999 (E/F) 86.1 to 86.3 or NFPA 30B; Flammable gas detector means a device allowing measuring of any significant concentration of flammable gases given off by the cargo below the lower explosive limit and which clearly indicates the presence of higher concentrations of such gases. Flammable gas detectors may be designed for measuring flammable gases only but also for measuring both flammable gases and oxygen. This device shall be so designed that measurements are possible without the necessity of entering the spaces to be checked; Flash-point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air; Flexible IBC means a body constituted of film, woven fabric or any other flexible material or combinations thereof, and if necessa...
Filling ratio means the ratio of the volume of the liquid gas in the receptacle to the total volume of the receptacle.
Filling ratio means the ratio of the mass of gas to the mass of water at 15° C that would fill Filling ratio (cargo tank): Where a filling ratio is given for a cargo tank, it refers to the percentage of the volume of the cargo tank which may be filled with liquid during loading; Fixed tank means a tank having a capacity of more than 1,000 litres which is permanently attached to a vehicle (which then becomes a tank-vehicle) or to a wagon (which then becomes a tank-wagon) or is an integral part of the frame of such vehicle or wagon; Flame arrester means a device mounted in the vent of part of an installation or in the interconnecting piping of a system of installations, the purpose of which is to permit flow but prevent the propagation of a flame front. The flame arrester shall be tested according to the international standard ISO 16852:20162 and evidence of compliance with the applicable requirements (e.g., conformity assessment procedure according to Directive 2014/34/EU,3 the IECEx System,4 ECE/TRADE/3915 or at least equivalent) shall be supplied; 2 Identical to EN ISO 16852:2016. 3 Official Journal of the European Union No. L 96 of 29 March 2014, p. 309. 4 ▇▇▇▇://▇▇▇▇▇.▇▇▇/rules.