Examples of Filament in a sentence
Loop Pile shall be 100 percent Bulk Continuous Filament (BCF); cut and loop shall be 100 percent BCF for the loop portion and may be BCF or staple for the cut portion; cut pile carpet shall be staple or BCF.
Filament type lamps shall be provided with series resistors to prevent short circuiting of control supplies on fusing of lamps filaments.
Filament winding operations shall be computer or mechanically controlled.
Filament yarn, including monofilament, of synthetic textile material, other than textured yarn, which does not break on being extended to three times its original length and which returns, after being extended to twice its original length, within a period of five minutes, to a length not greater than one and a half times its original length.
The major sub-sectors that comprise the textiles sector include the organized Cotton / Man-Made Fibre Textiles Mill Industry, the Man-made Fibre / Filament Yarn Industry, the Wool and Woollen Textiles Industry, the Sericulture and Silk Textiles Industry, Handlooms, Handicrafts, the Jute and Jute Textiles Industry, and Textiles Exports.
Each Participant is entitled to withdraw his/her consent to categories of e-mail and/or SMS communications from Threshold and can do so at anytime by either: i) following the opt-out instructions provided in the relevant e-mail or SMS, or ii) by writing to Threshold Sports, LU.416, The Lightbulb, Filament Walk, Wandsworth, London, SW18 4GQ.
The major sub-sectors that comprise the textiles sector include the organized Cotton/ Man-Made Fibre Textiles Mill Industry, the Man-made Fibre/ Filament Yarn Industry, the Wool and Woollen Textiles Industry, the Sericulture and Silk Textiles Industry, Handlooms, Handicrafts, the Jute and Jute Textiles Industry, and Textiles Exports.
Filament winding machines or 'fibre/tow-placement machines', of which the motions for positioning, wrapping and winding fibres can be co- ordinated and programmed in three or more axes, designed to fabricate composite structures or laminates from fibrous or filamentary materials, and co-ordinating and programming controls;b.
Luminous Flux with tolerance (in lumens) with black cap if so equipped, meas- ured in accordance with the document: Illu- minating Engineering Society of North America, LM–45; IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps (April 1980).
Type: Filament wound rated at design pressures indicated in the drawings.