factory sealed definition

factory sealed means in a closed, manufacturer-sealed, or packaged bottle or can or a licensee sealed, tamper proofed, and labeled growler of beer
factory sealed or "manufacturer sealed" means that a pack- age or container is in one hundred percent resalable condition, with all manufacturer's seals intact.
factory sealed means in a closed, manufacturer-sealed or packaged bottle or can, or a licensee sealed, tamper proofed, and labeled growler of beer. (Eff. 4/16/2020, Register 234; am 8/23/20, Register 235; am 11/17/2020, Register 236).

More Definitions of factory sealed

factory sealed means in a closed, manufacturer-sealed or packaged bottle or can, or a licensee sealed, tamper proofed, and labeled growler of beer. (Eff. 4/16/2020, Register 234, am / / ,Register ).
factory sealed register shall mean an NEMA 6P / IP68 rating which protects the meter and register against fogging, moisture and dust.

Related to factory sealed

  • Liquid-mounted seal means a primary seal mounted in continuous contact with the liquid between the tank wall and the floating roof around the circumference of the tank.

  • factory means any premises including the precincts thereof—

  • Carton means 10 packs of cigarettes, each containing 20 cigarettes or eight packs, each containing

  • Vapor-mounted seal means a primary seal mounted so there is an annular vapor space underneath the seal. The annular vapor space is bounded by the bottom of the primary seal, the tank wall, the liquid surface and the floating roof.

  • Air kerma means kerma in a given mass of air. The unit used to measure the quantity of air kerma is the Gray (Gy). For X-rays with energies less than 300 kiloelectronvolts (keV), 1 Gray of absorbed dose is delivered by 114 roentgens (R) of exposure.

  • Ambulatory surgical facility means a facility that:  Is licensed by the state where it is located.  Is equipped and operated mainly to provide for surgeries or obstetrical deliveries.  Allows patients to leave the facility the same day the surgery or delivery occurs.

  • Floor seam sealer means any product designed and labeled exclusively for bonding, fusing, or sealing (coating) seams between adjoining rolls of installed flexible sheet flooring.

  • Cremation container means a leak and spill resistant, rigid,

  • Reception center means a business that:

  • Ambulatory surgical center means any public or private State licensed and approved (whenever required by law) establishment with an organized medical staff of Physicians, with permanent facilities that are equipped and operated primarily for the purpose of performing Surgical Procedures, with continuous Physician services and registered professional nursing service whenever a patient is in the facility, and which does not provide service or other accommodations for patients to stay overnight.

  • Common Seal means the Common Seal of the Council;

  • Conifer means a tree that is a Douglas-fir, true fir, pine, western hemlock, spruce, or cedar.

  • Convention center means a facility that is:

  • Freeboard means a factor of safety usually expressed in feet above a flood level for purposes of floodplain management. "Freeboard" tends to compensate for the many unknown factors that could contribute to flood heights greater than the height calculated for a selected size flood and floodway conditions, such as wave action, blockage of bridge or culvert openings, and the hydrological effect of urbanization of the watershed.

  • State of Texas Textravel means Texas Administrative Code, Title 34, Part 1, Chapter 5, Subchapter C, Section 5.22, relative to travel reimbursements under this Contract, if any.

  • Hermetically sealed container means a container designed and intended to be secure against the entry of microorganisms and, in the case of low acid canned foods, to maintain the commercial sterility of its content after processing.

  • Hair mousse means a hairstyling foam designed to facilitate styling of a coiffure and provide limited holding power.

  • International shipment means the transportation of hazardous waste into or out of the jurisdiction of the United States.

  • Barge means a vessel that is not self-propelled.

  • Shipping container means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

  • Kerma or "K" means the quantity defined by the International Commission on Radiation Units and Measurements. The kerma is the quotient of dEtr by dm, where dEtr is the sum of the initial kinetic energies of all charged particles liberated by uncharged particles in a mass dm of materials; thus K=dEtr/dm, in units of J/kg, where the special name for the units of kerma is gray (Gy). When the materials is air, the quantity is referred to as "air kerma."

  • Distribution center means a building or structure used primarily for the storage of goods which are intended for subsequent shipment to retail outlets. Distribution center does not mean a building or structure used primarily to store raw agricultural products, used primarily by a manufacturer to store goods to be used in the manufacturing process, used primarily for the storage of petroleum products, or used for the retail sale of goods.

  • User seal check or "fit check" means an action conducted by the respirator user to determine if the respirator is properly seated to the face. Examples include negative pressure check, positive pressure check, irritant smoke check, or isoamyl acetate check.

  • Moving beam radiation therapy means radiation therapy with any planned displacement of radiation field or patient relative to each other, or with any planned change of absorbed dose distribution. It includes arc, skip, conformal, intensity modulation and rotational therapy.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.