Exposed surfaces definition

Exposed surfaces means areas visible when permanent or built-in fixtures, convector covers, grilles, etc., are in place in areas scheduled to be painted.
Exposed surfaces means all formed concrete surfaces exposed to view on completion of WORK, unless otherwise indicated.
Exposed surfaces means any surface, in or on a dwelling unit or dwelling that is readily accessible to children or any surface where the chipping, peeling or falling paint chips could be accessible to children.

Examples of Exposed surfaces in a sentence

  • Exposed surfaces shall be clean and painted if paint is required.

  • Exposed surfaces of concrete which are indicated/ required to be plastered shall be roughened with wire brushes and hacked out closely immediately after removal of formwork by free of cost.Any honeycomb , appeared after removal of form work shall be mended as per procedures laid down in IS codes including pressure grouting required , if any, as instructed by WBSEDCL with risk and cost of the Contractor without any further claim.

  • Exposed surfaces chemically cleansed, capping prefinished galvanized steel in baked polyester paint.

  • Exposed surfaces of hardware shall have ANSI A156.18, finishes as specified below.

  • Exposed surfaces of concrete shall be kept continuously in a damp or wet condition by pounding or by covering with a layer of sacking, canvas, Hessian or similarly materials and kept constantly wet for at least 21 days from the date of placing concrete.

  • Exposed surfaces of concrete shall be kept continuously in a damp or wet condition by ponding or by covering with a layer of sacking, canvas, hessian or similar material and kept constantly wet for at least seven days from the date of placing concrete in case of OPC and at least 10 days where mineral admixtures or blended cements are used.

  • Exposed surfaces shall be finished smooth, thoroughly cleaned, and filled as necessary to provide a smooth uniform base for painting.

  • Exposed surfaces include, but are not limited to soil piles, graded areas, unpaved parking areas, staging areas, and access roads.

  • Finish: Exposed surfaces shall have standard polish (ground and polished) equal to NAAMM finish Number 4.

  • Special Finish: Exposed surfaces of hardware for dark bronze anodized aluminum doors shall have oxidized oil rubbed bronze finish (dark bronze) finish on door closers shall closely match doors.


More Definitions of Exposed surfaces

Exposed surfaces as used means all formed concrete surfaces exposed to view on completion of work.
Exposed surfaces means all surfaces or areas visible when the permanent construction is completed, and when all built-in cabinets, fixtures, convector covers, grilles and similar items are in place. “Exposed surfaces” shall include all surfaces or areas in back of cabinets, furniture, equipment and other items that are not built-in or fixed in place, and also shall include all surfaces visible thru grilles, louvers and registers, and all roof-mounted ferrous metal items.
Exposed surfaces means areas visible when permanent or built-in fixtures, convector covers, covers for finned tube radiation, grilles, etc., are in place in areas scheduled to be painted.

Related to Exposed surfaces

  • Contaminated soil means soil that meets all of the following criteria:

  • Geologically hazardous areas means areas that because of their susceptibility to erosion, sliding, earthquake, or other geological events, are not suited to the siting of commercial, residential, or industrial development consistent with public health or safety concerns.

  • Contaminate means the addition of sediment, any other pollutant or waste, or any illicit or prohibited discharge.

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Contaminated site means a site where there is a confirmed presence, caused by man, of hazardous substances of such a level that they pose a significant risk to human health or the environment taking into account current and approved future use of the land;

  • Exposed workplace means any work location, working area, or common area at work used or accessed by a COVID-19 case during the high-risk period, including bathrooms, walkways, hallways, aisles, break or eating areas, and waiting areas. The exposed workplace does not include buildings or facilities not entered by a COVID-19 case.

  • Contamination means an impairment of the quality of the waters of the state by waste to a degree which creates a hazard to the public health through poisoning or through the spread of disease. “Contamination” includes any equivalent effect resulting from the disposal of waste, whether or not waters of the state are affected.

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Contaminated means the actual existence on or under any real property of Hazardous Substances, if the existence of such Hazardous Substances triggers a requirement to perform any investigatory, remedial, removal or other response action under any Environmental Laws or if such response action legally could be required by any governmental authority; "Facility" means any property currently owned, leased or occupied by the Company.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Hazardous Substances means any hazardous waste, hazardous substance, pollutant, contaminant, toxic substance, oil, hazardous material, chemical or other substance regulated by any Environmental Law.

  • Soil means all unconsolidated mineral and organic material of any origin.

  • Extremely Hazardous Substance has the meaning set forth in Section 302 of the Emergency Planning and Community Right-to-Know Act of 1986, as amended.

  • Dangerous Substances means a substance or article described in regulation 3 of the Dangerous Substances Regulations;

  • Pests means Birds, Vermin and Insects.

  • Recyclable Materials means materials that are separated from mixed municipal solid waste for the purpose of recycling or composting, including paper, glass, plastics, metals, automobile oil, batteries, source-separated compostable materials, and sole source food waste streams that are managed through biodegradative processes. Refuse-derived fuel or other material that is destroyed by incineration is not a recyclable material. (Minn. Stat. § 115A.03, Subd. 25a)

  • animals means animals as defined in the Terrestrial Animal Health Code or the Aquatic Animal Health Code of the World Organisation for Animal Health (OIE), respectively;

  • Covered Species means the species for which the Bank has been established and for which Credits have been allocated as set forth in Exhibit F-1.

  • Water Surface Elevation (WSE means the height, in relation to mean sea level, of floods of various magnitudes and frequencies in the floodplains of coastal or riverine areas.

  • Environmentally sensitive area means any area in which plant or animal life or their habitats are either rare or especially valuable because of their special nature or role in an ecosystem and which could be easily disturbed or degraded by human activities and developments.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • danger area means an airspace of defined dimensions within which activities dangerous to the flight of aircraft may exist at specified times;

  • Recyclable material means a material generated by the entity's operations, including aluminum, steel containers, aseptic packag- ing and polycoated paperboard cartons, high-grade office paper, and corrugated cardboard.

  • sensitive area means any of the following—

  • Recyclables means Solid Waste that may be reclaimed and/or processed and used in the production of raw materials or products.