Epoxy definition

Epoxy means any thermoset coating formed by reaction of an epoxy resin, that is, a resin containing a reactive epoxide or oxirane function, such as the condensation product of epichlorohydrin and bisphenol A, with a curing agent, such as a polyamide or polyamine.
Epoxy means anythermoset coating formed by reaction of an epoxy resin, that is, a resin containing a reactive epoxide or oxirane function, such as the condensation product of epichlorohydrin and bisphenol A, with a curing agent, such as a
Epoxy means a chemical coating containing epoxy groups and suitable chemical cross- linking agents. The primary mode of cure involves a chemical reaction between the epoxy and the cross-linking agent.

Examples of Epoxy in a sentence

  • Ray-O-Lite, Model 2004 ARS (51 mm x 100 mm)**For use only in 114 mm wide (older) recessed slots Non-Reflective For Use With Epoxy Adhesive, 100 mm RoundA.

  • Table 762-02 Epoxy Paint GroovesParameter After creating the groove, prepare the surface in accordance with the manufacturer’s instruction.

  • This type of adhesive provides rapid adherence to traffic markers to the surface of pavement.Type II – Standard Setting, High Viscosity, Epoxy Adhesive.

  • This type of adhesive is recommended for adherence of traffic markers to pavement surfaces when rapid set is not required.Type III – Rapid Setting, Low Viscosity, Water Resistant, Epoxy Adhesive.

  • Two coats of Anti Corrosive primer followed by a finishing coat of Epoxy spray power coating of the shade 631 of IS : 5 (i.e. Siemens grey) shall be given.

  • Epoxy Seam Sealer: Two-part, noncorrosive, aluminum seam-cementing compound, recommended by aluminum manufacturer for exterior nonmoving joints, including riveted joints.

  • The epoxy adhesive shall conform to the provisions in Sections 95-1, "General," and 95-2.01, "Binder (Adhesive), Epoxy Resin Base (State Specification 8040-03)." The first and second paragraphs in Section 49-4.01, "Description," of the Standard Specifications are amended to read: • Cast-in-place concrete piles shall consist of one of the following: A.

  • Epoxy pavement markings shall only be applied during conditions of dry weather and on substantially dry pavement surfaces.

  • Epoxy reflectorized pavement markings, which after application and curing are determined by the Engineer to be defective and not in conformance with this specification, shall be repaired.

  • Applications of Epoxy Reflectorized Pavement Markings of this Special Provisions.


More Definitions of Epoxy

Epoxy means anythermoset coating formed byreaction of an epoxyresin, that is, a resin containing a reactive epoxide or oxirane function, such as the condensation product of epichlorohydrin and bisphenol A, with a curing agent, such as a polyamide or polyamine.

Related to Epoxy

  • HDPE means high density polyethylene;

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Enamel means a coat of colored material, usually opaque, that is applied as a protective topcoat over a basecoat, primer, or a previously applied enamel coat. In some cases, another finishing material may be applied as a topcoat over the enamel.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Cream means cream obtained directly and exclusively from milk.

  • Wax means a material or synthetic thermoplastic substance generally of high molecular weight hydrocarbons or high molecular weight esters of fatty acids or alcohols, except glycerol and high polymers (plastics). “Wax” includes, but is not limited to, substances derived from the secretions of plants and animals such as carnuba wax and beeswax, substances of a mineral origin such as ozocerite and paraffin, and synthetic polymers such as polyethylene.

  • Edge of any water means the outer edge of the water's bankfull width or, where applicable, the outer edge of the associated channel migration zone.

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Laser means any device excepting a Class 1 device which can be made to produce or amplify electromagnetic radiation in the wave length range from 100 nanometres to 1 millimetre primarily by the process of controlled stimulated emission.

  • LSD means lysergic acid diethylamide.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • Polystyrene foam means blown polystyrene and expanded and

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Porch means a covered surface supported on pillars or otherwise for the purpose of a pedestrian or vehicular approach to a building.

  • Defoliant means any substance or mixture of substances intended for causing the leaves or foliage to drop from a plant, with or without causing abscission.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Autocycle means the same as that term is defined in Section 53-3-102.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • apron means a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Brush means vegetation with stems less than six (6) inches diameter at breast height.

  • Grinding means to reduce to powder or small fragments and includes mechanical chipping or drilling.