EPDM definition

EPDM shall have the meaning set forth in Section 2.5.
EPDM means ethylene propylene diene monomer;
EPDM means ethylene propylene diene Monomer (M-class) rubber. “EPR” means ethylene propylene rubber.

Examples of EPDM in a sentence

  • Sealing Elements: EPDM interlocking links shaped to fit surface of pipe.

  • Copper bus bars/terminal blocks housed in the junction box with suitable termination threads Conforming to IP65 standard and IEC 62208 Hinged door with EPDM rubber gasket to prevent water entry.

  • Provide metal-backed EPDM or PVC sealing washers under heads of exposed fasteners bearing on weather side of metal.

  • Sealing Elements: EPDM interlocking links shaped to fit surface of cable or conduit.

  • EPDM gasket shall be of size and profile as shown in drawing or as called for the render the glazing, door, window and ventilator etc to make air and water tight sample of gaskets shall be produces for approval.

  • The material specification for EPDM gasket shall be meet the following requirement.

  • EPDM.GASKET EPDM (Ethyl propylene Diamine Monomer) Gasket of approved.

  • Flange Gaskets: Butyl rubber, neoprene, or EPDM polymer with polyisobutylene plasticizer.

  • Body Material: Ductile-iron housing with EPDM seals and bolts and nuts.

  • Where black- and galvanized-steel shapes and plates are used to reinforce aluminum ducts, isolate the different metals with butyl rubber, neoprene, or EPDM gasket materials.


More Definitions of EPDM

EPDM means Ethyline Propylene Diene Rubber;
EPDM means an ethylene propylene diene monomer type of synthetic rubber;
EPDM means ethylene propylene diene monomer synthetic rubber, as that term is used in the Second Consolidated Amended Complaint (dated July 1, 2004).
EPDM means an ethylene propylene diene monomer type of synthetic rubber; (dd) “FM” means FM Global a mutual insurance company specializing in loss prevention; (ee) “Fire Stop Material” means a device intended to close off opening or penetrationduring fire or materials that fill openings in wall or floor assembly where penetration is by cables, cable trays, conduits, ducts and pipes and poke-through termination devices, including electrical outlet boxes along with their means of support through wall or floor openings;(ff) “Friable Material” means material that when dry can be crumbled, pulverized or powered by hand pressure and includes such materials that is crumbled, pulverized or powdered;(gg) “Glove Bag” means a prefabricated glove bag as follows:

Related to EPDM

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

  • EPG means electronic program guide maintained by a DPO on its Digital Distribution Platform which lists the television channels and programs, and scheduling and programming information therein and includes any enhanced electronic guide that allows Subscribers to navigate and select such available channels and programs.

  • LSD means lysergic acid diethylamide.

  • Image intensifier means a device, installed in its housing, which instantaneously converts an x-ray pattern into a corresponding light image of higher intensity.

  • HDPE means high density polyethylene;

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Valve means a device used to control the flow of water in the irrigation system.

  • LDPE means low density polyethylene, labeled by the SPI code #4.

  • COVID-19 means SARS-CoV-2 or COVID-19, and any evolutions thereof or related or associated epidemics, pandemic or disease outbreaks.

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Autocycle means the same as that term is defined in Section 53-3-102.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Fossil fuel-fired means, with regard to a unit:

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • TMDL means the total maximum daily load limitation of a parameter, representing the estimated assimilative capacity for a water body before other designated uses are adversely affected. Mathematically, it is the sum of wasteload allocations for point sources, load allocations for non-point and natural background sources, and a margin of safety.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Clone means a non-flowering plant cut from a mother plant that is capable of developing into a new plant and has shown no signs of flowering.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Powertrain means the total combination in a vehicle of propulsion energy storage system(s), propulsion energy converter(s) and the drivetrain(s) providing the mechanical energy at the wheels for the purpose of vehicle propulsion, plus peripheral devices.

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • CMOs means notes or other instruments secured by collateral consisting primarily of mortgages, mortgage-backed securities and/or other types of mortgage-related obligations.