Engine Oil definition

Engine Oil means Subaru Synthetic 0W-20 Motor Oil or equivalent SAE 0W-20 synthetic oil with the API classification SM or SN with the words “ENERGY CONSERVING” or “RESOURCE CONSERVING” and/or ILSAC GF-4 or GF-5, which can be identified with the ILSAC certification ▇▇▇▇ (e.g., AMSOIL Signature Series, Castrol GTX MAGNATEC, Castrol EDGE, Mobil 1 Extended Performance, Mobil 1 Advanced Fuel Economy, Mobil 1 Super Synthetic, Pennzoil Platinum Full Synthetic, Valvoline SynPower, etc.), required for use in the Settlement Class Vehicles as stated in the applicable Owner’s Manual.
View Source

Examples of Engine Oil in a sentence

  • Each 3 months or 3,000 miles whichever occurs first from purchase or last service: Change Engine Oil and Engine Oil Filter Check Transmission Fluid Level Check Rear Axle Fluid Level Lubricate Vehicle Other Special Services as recommended by dealer or manufacturer.

  • LDC warns shall include; Engine Oil Pressure, Machine Locked, Service Due, Air Filter Blocked, High Coolant Temperature, Auto Idle Shutdown, High Torque Converter Temperature and Hydraulic Filter Bypass Y N _ Unit shall have a lighted instrument panel located on the right side of the cab so that it is visible from both loader and backhoe operating positions.

  • All buses in side broom cleaning /Vacuum cleaning and wiping to be done Date Registration No. Mechanic/Electrician: 1 Check and correct the levels of - Engine Oil - Steering oil - Transmission oil - Rear axle oil - Coolant - Ensure proper fitment of radiator and oil filler caps - Start the engine and check oil, coolant leakages and rectify, if required.

  • Replace Engine Oil & Filter Change oil according to manufacturer’s specifications either under the normal or severe duty operating conditions.

  • API is the owner of all rights to certain certification marks relating to API's Engine Oil Licensing and Certification System, (hereinafter "EOLCS").

  • Synthetic Engine Oil 5 W -40 W ACEA A3/B4, A3/B3, API SN/CF 210LT Each 30000 R……………………….

  • These nine ASTs contain: M1 - DTE 25 Lube Oil M2 - Omnicron Cutting Oil M3 - Metcut G Cutting Fluid M4 - Delvac 10W Engine Oil M5 - Velocite 6 Hydraulic Fluid M6 - MobilMet Nu Cutting Oil M1B - DTE 25 Lube Oil M2B - Omnicron Cutting Oil M3B - Metcut G Cutting Fluid The remaining Plant 3 ASTs contain waste coolant/washing solution, waste oil, and a series of tanks utilized for the make-up of fresh coolant.

  • These nine ASTs contain: M1 - DTE 25 Lube Oil M2 - Omnicron Cutting Oil M3 - Metcut G Cutting fluid M4 - Delvac 10W Engine Oil M5 - Velocite 6 Hydraulic Fluid M6 - MobilMet Nu Cutting Oil M1B - DTE 25 Lube Oil M2B - Omnicron Cutting Oil M3B - Metcut G Cutting Fluid The remaining Plant 3 ASTs contain waste coolant/washing solution, waste oil, and a series of tanks utilized for the make-up of fresh coolant.

  • Pop the hood and locate the Injection Control Pressure (ICP), Manifold absolute pressure Sensor (MAP), Engine Oil temperature (EOT), and engine coolant temperature sensors (ECT).

  • These nine ASTs contain: M1 - DTE 25 Lube Oil M2 - Omnicrom Cutting Oil M3 - Metcut G Cutting fluid M4 - Delvac 10W Engine Oil M5 - Velocite 6 Hydraulic Fluid M6 - MobilMet Nu Cutting Oil M1B - DTE 25 Lube Oil M2B - Omnicron Cutting Oil M3B - Metcut G Cutting Fluid The remaining Plant 3 ASTs contain waste coolant/washing solution, waste oil, and a series of tanks utilized for the make-up of fresh coolant.