Embedded Track definition

Embedded Track means a type of track that is completely encased in cast-in-place concrete using elastomeric grout or rubber rail boots.
View Source
Embedded Track or “Embedded Trackway” means a type of Trackway that is completely encased in cast in place concrete – except for the tops and gauge sides of the rails-within pavement.
View Source

Examples of Embedded Track in a sentence

  • The Stormwater Management System shall not alter or disrupt existing overland flow patterns from areas external to the Lands that flow onto, across and off of areas in the LRT Corridor that will consist of Embedded Track or Direct Fixation Track sections, unless otherwise specified herein or required to comply with Section 3-4.5.1 [Flood Mitigation of Trackway] of this Schedule.

  • Ponding and overland flow within the Trackway shall not exceed the top of rail for any type of Track, other than Embedded Track, during events up to and including the 1:100 year design event.

  • Switches within Embedded Track sections must be concealed below top of rail, where they are operated with removable levers.

  • Ponding and overland flow within the Trackway of Embedded Track on 102 Avenue within 100m of 97 Street during a design event in excess of the 1:5 year design event, up to and including the 1:100 year design event, shall not exceed the maximum depth of water through which the LRV can pass without damage or disruption to Operations.

  • Tie and ballast track should be provided for Yard Tracks within the ▇▇▇▇ ▇▇▇▇▇▇▇▇ OMF where Embedded Track is not prescribed.

  • Provide either Embedded Track or Direct Fixation Track throughout the Davies Station, for at least the length of the Platforms.

  • Design and Construct the Stormwater Management System to not alter or disrupt existing overland flow patterns from areas external to the City Lands that flow onto, across and off of the City Lands that will consist of Embedded Track or Direct Fixation Track sections, unless otherwise specified herein or required to comply with Section 3-3.

  • The Track Remediation shall provide Montreat with a track that is the same or reasonably comparable to the B▇▇▇▇▇ Sports BSS 1000 Full Pour Embedded Track Surface at a thickness of 10mm with a five-year warranty, as originally specified in the contract for the Project.

  • Ponding and overland flow within the Trackway shall not exceed the top of rail for Embedded Track during events up to and including the 1:5 year design event.