Elevator capacity definition

Elevator capacity means the pounds of elevator capacity for elevators type PXH, PXVE, and PXE as recorded in the records of the Building Codes Division of the Oregon Department of Consumer and Business Services;
Sample 1Sample 2Sample 3

Examples of Elevator capacity in a sentence

  • Elevator capacity will be limited to the number of people that can be accommodated while maintaining 6-foot distance between riders.

  • Elevator capacity and discharge height effects the on/off cycling duration.

  • It was found that there was no significant difference in ear blockage at a speed of 810 m/min for a travel distance of 500 m compared with a travel distance of 200 m.Development work on elevators enabling significant speed increases also achieved many other milestones in fundamental elevator technologies.

  • Elevator capacity guidelines, according to the Virginia Department of Human Resources "Safe Workplaces: Guidance for State Agency Leaders in Response to the COVID-19 Pandemic and Enhanced Safety Measures", limits no more than three individuals in an elevator at a time depending on the size.

  • Elevator capacity, platform size, and entrance configuration of medical emergency elevators shall be capable of accommodating the designated gurney or stretcher with equivalent ease.

  • Employees may momentarily come closer when necessary to accept payment, deliver goods or services, or as otherwise necessary.❑ Elevator capacity is limited to 4 individuals or fewer at a time for any elevator that does not allow for 6-foot physical distance between riders.

  • Established directional hallways and passageways for foot traffic, where possible, to eliminate people from passing by one another.❑ Office spaces, lobbies, front desk check-in areas, business centers, concierge service areas, and other spaces are redesigned, where possible, to ensure workspace and guest accommodations allow for at least six feet distancing.❑ Elevator capacity is limited to 4 individuals or a family at a time for any elevator that does not allow for 6-foot physical distance between riders.

  • The movement in provision for liquidated damages is as under: As at March 31, 2016As at March 31, 2015Opening balance14.5414.54Add: Additions during the year--Less: Reversal during the year(1.34)-Closing balance13.2014.54 34.

  • Each form must be completed in its entirety, reviewed by the Vice President for Academic Affairs or Associate Vice President prior to submission to ARP, the Cover/Signature page signed, and lastly submitted to ARP as a single Microsoft WORD document for archival and reproduction purposes.

  • Laptop computers may be available to check out from the Central Library.e) Lounges: Furnishings in social and study lounges will be limited to encourage social distancing.f) Elevators: Elevator capacity will be limited based on the size of the elevator, so please use the stairs whenever possible.

Related to Elevator capacity

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;