Electrolytic Capacitors definition

Electrolytic Capacitors means aluminum and tantalum electrolytic capacitors.
Sample 1Sample 2Sample 3
Electrolytic Capacitors and “film capacitors” are two types of electronic components used in an electrical circuit in order to store a charge. Electrolytic and film capacitors are found in electronics like smartphones, gaming consoles, home appliances and televisions, among other products. Panasonic has agreed to pay CAD $5,950,000 for the benefit of Electrolytic Settlement Class Members and CAD $1,350,000 for the benefit of Film Settlement Class Members. In addition, Panasonic has agreed to provide co-operation to the plaintiffs in pursuing their claims against the non-settling defendants in both class actions. The settlement, which was negotiated over several months, is not an admission by Panasonic of liability, faulty, or wrongdoing, but is a compromise of disputed claims. The settlement must be approved by the courts before it becomes effective. “These class actions are an essential legal tool. They allow purchasers of electronic components and products containing them to overcome traditional economic and other barriers to access the legal system in order to bring forward complex price fixing allegations. These settlements are very valuable to the class members we represent” said Xxxxxxxx Xxxxxxx, of Xxxxxxx & Company, one of the lawyers representing the plaintiffs in the class actions. For more detailed information and to review the long-form notice, please visit xxx.xxxxxxxxxxxxxxxxxxxx.xx. Class members are represented by: Xxxxxxx & Company (Canada except BC and QC) Camp Xxxxxxxx Xxxxxxxx Xxxxxxxx LLP (BC) Xxxxxxx Xxxxxxxx, s.e.n.c.r.l. (QC) Media contacts:
Sample 1

Examples of Electrolytic Capacitors in a sentence

  • To remove and replace this board, follow these steps: a Open the rear door and test the DC/AC Module DC Electrolytic Capacitors (Figure 1) with a voltmeter to be sure that they are fully discharged.

  • This specification is applied to products, which are Aluminum Electrolytic Capacitors (JIS04 type) that taped with single tape.

  • All Persons in Canada who purchased Electrolytic Capacitors or a product containing an Electrolytic Capacitor during the Electrolytic Class Period other than (1) all BC Settlement Class members (2) all Québec Settlement Class members and (3) Excluded Persons.

  • To remove and replace this board, follow these steps:a Open the rear door and test the DC/AC Module DC Electrolytic Capacitors (Figure 1) with a voltmeter to be sure that they are fully discharged.

  • All Persons in Canada who purchased Electrolytic Capacitors or a product containing an Electrolytic Capacitor during the Class Period other than (1) all BC Settlement Class members (2) all Québec Settlement Class members and (3) Excluded Persons.

  • All Persons in Québec who purchased Electrolytic Capacitors or a product containing an Electrolytic Capacitor during the Class Period except Excluded Persons.

  • The business activities are or-ganised into sales, marketing and technical advice, product development and finan- cial managment as well as into two product groups: Electrolytic Capacitors and Film and Paper Capacitors.

  • During the information session the researcher discussed the purpose of the study and the researcher's expectations of the participants.

  • The case of Conductive Polymer Hybrid Alumi- num Electrolytic Capacitors, Solid Conductive Polymer Aluminum Electrolytic Capacitors and the cathode terminal are not insulated.• The case and the cathode terminal are not insulatedas being connected through inconstant resistance.12.

  • Regarding Connection of Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, Solid Conductive Polymer Aluminum Electrolytic Capacitors• When connecting more than one capacitor inparallel, consider the current balance.14.

Related to Electrolytic Capacitors

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • PNode has the meaning set forth in the CAISO Tariff.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Radionuclide means a radioactive element or a radioactive isotope.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Substrate means the surface onto which a coating is applied or into which a coating is impregnated.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Microorganisms (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Protector means a utility-owned electrical device located in the central office, at a customer’s premises or anywhere along any telephone facilities which protects both the telephone utility’s and the customer’s property and facilities from over-voltage and over-current by shunting such excessive voltage and currents to ground.

  • HDPE means high density polyethylene;

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement. Generation Interconnection Customer:

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.