Dynamic Scheduling definition

Dynamic Scheduling means the automated scheduling of Energy from the Point of Delivery to Purchaser’s control area or electric system, provided that said dynamic schedules adjust at four second intervals, or other intervals as specified by WECC, to match the amount of Energy actually delivered to the Point of Delivery from the Facility.
Sample 1Sample 2Sample 3
Dynamic Scheduling or "Dynamically Scheduled" - with respect to this Agreement, means that Oglethorpe Power has the contractual right to provide a Dynamic Schedule (as defined by NERC's "Terms Used in the Policies") for an OPC-Controllable-ITS Resource or an OPC Non-Territorial Load, where (i) such resource or load is physically located in a control area immediately adjacent to the ITS, or (ii) such resource is located within the ITS but is operated by a person or entity engaged in the selling of wholesale power to persons or entities other than Oglethorpe Power; provided, however, that such Dynamic Scheduling must be performed in accordance with appropriate industry standards and procedures and Oglethorpe Power must pay all reasonable costs associated with such Dynamic Scheduling.
Sample 1

Examples of Dynamic Scheduling in a sentence

  • In the event that the CAISO determines that the Scheduling Coordinator has failed to comply with the CAISO Dynamic Scheduling Protocol, the CAISO will provide written notice to that effect to the Scheduling Coordinator, and the Scheduling Coordinator shall have seven (7) days to correct the non-compliant condition(s).

  • Telemetry data from Dynamic Resource- Specific System Resources shall be provided in accordance with the requirements of the CAISO’s Dynamic Scheduling Protocol in Appendix X.

  • If such defined performance band is exceeded by any amount in more than five percent (5%) of the ten-minute intervals on three successive days, then such deviations shall constitute one event of non-compliance with the CAISO Dynamic Scheduling Protocol pursuant to Section 3.2.2. Deviations from Dynamic Schedules of Energy will also be subject to Uninstructed Deviation Penalties pursuant to Section 11.23 and related provisions of the CAISO Tariff.

  • ERCOT may approve other Dynamic Scheduling proposals by QSEs on a case-by-case basis.

  • SECTIONS 13-14 OF THE FW ACT State: X will be a national system employee if he/she is employed by a national system employer (s13 FW Act).

  • CAISO TARIFF APPENDIX XDynamic Scheduling Protocol (DSP) CAISO TARIFF APPENDIX X Dynamic Scheduling Protocol (DSP) 1 [NOT USED] 2 CONSISTENCY WITH NERC/WECC POLICIES AND REQUIREMENTS 2.1 Scheduling and operation of Dynamic Schedule functionalities must comply with all applicable NERC and WECC policies and requirements regarding inter-Balancing Authority Area scheduling, in accordance with Section 4.5.4.3 of the CAISO Tariff.

  • Each Dynamic System Resource offering Regulation must comply with the Dynamic Scheduling Protocol in Appendix M.

  • Each Generating Unit and System Unit used to bid Regulation or used to self-provide Regulation must have been certified and tested by the ISO using the process defined in Part A of Appendix K, Each System Resource used to bid or self-provide Regulation must comply with the Dynamic Scheduling Protocol in Appendix X.

  • Each System Resource used to bid or self-provide Regulation must comply with the Dynamic Scheduling Protocol in Appendix X.

  • The Parties will comply with all applicable provisions of the CAISO Tariff, including Sections 4.5.4.3 and 8.4.5 and the Dynamic Scheduling Protocol in Appendix M.

Related to Dynamic Scheduling

  • Coordinated Transaction Scheduling or “CTS” shall mean the market rules that allow transactions to be scheduled based on a bidder’s willingness to purchase energy from a source in either the NYISO or PJM Control Area and sell it at a sink in the other Control Area if the forecasted price at the sink minus the forecasted price at the corresponding source is greater than or equal to the dollar value specified in the bid.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Integrated Services Digital Network (ISDN means a switched network service that provides end-to-end digital connectivity for the simultaneous transmission of voice and data. Basic Rate Interface-ISDN (BRI-ISDN) provides for a digital transmission of two (2) 64 Kbps bearer channels and one (1) 16 Kbps data channel (2B+D).

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Network plan means a policy of group health insurance offered by an insurer under which the financing and delivery of medical care, including items and services paid for as medical care, are provided, in whole or in part, through a defined set of providers under contract with the insurer. The term does not include an arrangement for the financing of premiums.

  • T&Cs means these terms and conditions.

  • Customer Systems means the Customer's information technology infrastructure, including computers, software, hardware, databases, electronic systems (including database management systems) and networks, whether operated directly by Customer or through the use of third-party services.

  • Service Descriptions means user manuals and other documentation relating to the Services that are made available to Customer by Provider in digital or hardcopy form, as updated from time to time.

  • Customer System means the Customer's computing environment (consisting of hardware, software and/or telecommunications networks or equipment) used by the Customer or the Supplier in connection with this Contract which is owned by or licensed to the Customer by a third party and which interfaces with the Supplier System or which is necessary for the Customer to receive the Services;

  • Diagnostic clinical procedures manual means a collection of written procedures that describes each method (and other instructions and precautions) by which the licensee performs diagnostic clinical procedures; where each diagnostic clinical procedure has been approved by the authorized user and includes the radiopharmaceutical, dosage, and route of administration.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Protocols means written directions and orders, consistent with the department’s standard of care, that are to be followed by an emergency medical care provider in emergency and nonemergency situations. Protocols must be approved by the service program’s medical director and address the care of both adult and pediatric patients.

  • Integrated Services Digital Network (ISDN) means a switched network service that provides end-to-end digital connectivity for the simultaneous transmission of voice and data. Basic Rate Interface-ISDN (BRI-ISDN) provides for a digital transmission of two 64 Kbps bearer channels and one 16 Kbps data channel (2B+D).

  • Supplier System means the information and communications technology system used by the Supplier in performing the Services including the Software, the Equipment and related cabling (but excluding the Customer System);

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Network Service User means an entity using Network Transmission Service.

  • Infrastructure means infrastructure serving the County and improved or unimproved real estate and personal property, including machinery and equipment, used in the operation of the Project, within the meaning of Section 4-29-68 of the Code.

  • Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.

  • National Medical Support Notice or “NMSN” shall mean a notice that contains the following information:

  • Service Description means pre-defined descriptions of services found at http://www.sap.com/servicedescriptions current as of the effective date of the Order Form which in conjunction with a Scope Document (if any) defines the Services to be provided and becomes part of the Order Form.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • System Software means Software that provides the operating and management instructions for the underlying hardware and other components, and is identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Systems Software. Such System Software includes, but is not restricted to, micro-code embedded in hardware (i.e., “firmware”), operating systems, communications, system and network management, and utility software.

  • Interfaces means, collectively, the CAD Interface and the Channel Access Interface.

  • Customer Content means all software, data (including personal data), information, text, images, audio, video, photographs, non-AVEVA or third-party applications, and other content and material, in any format, provided by Customer, any of Customer’s users, or on behalf of Customer that is stored in, or run on or through, the Products and Support Services.