driving licence means the licence issued by a competent authority under Chapter II authorising the person specified therein to drive, otherwise than as a learner, a motor vehicle or a motor vehicle of any specified class or description;
manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;
Dynamic driving task means the same as that term is defined in Section 41-26-102.1.
Field-flattening filter means a filter used to homogenize the absorbed dose rate over the radiation field.
Filter means material placed in the useful beam to preferentially absorb selected radiations.
Living area means the interior habitable area of a dwelling unit, including basements and attics, but does not include a garage or any accessory structure.
Slash means all debris created on the Work area by the precommercial thinning operation.
HEPA filter means a high efficiency particulate absolute air filter capable of trapping and retaining 99.97 percent of fibers greater than 0.3 micrometers in mass median aerodynamic diameter equivalent.
Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.
Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)
FedRAMP means the Federal Risk and Authorization Management Program (see xxx.xxxxxxx.xxx), which is an assessment and authorization process that federal government agencies have been directed to use to ensure security is in place when accessing Cloud computing products and services.
Tissue means a portion of the human body other than an organ or an eye. The term does not include blood unless the blood is donated for the purpose of research or education.
Kyoto Protocol means the protocol to the UNFCCC adopted at the Third Conference of the Parties to the UNFCCC in Kyoto, Japan on 11 December 1997 as may be amended;
Front fog lamp means the lamp used to improve the illumination of the road in case of fog, snowfall, rainstorms or dust clouds;
Solution means the MMF or a subset thereof, and in respect of any Sprint means the solution to be delivered by the Supplier to meet the Acceptance Criteria for the Stories that form the subject of that Sprint; and the output of the Solution may take the form of the delivery of Software and/or Deliverables and/or the provision of Services; SOW means a statement of work as executed by the Parties, in respect of a Release; and where multiple SOWs have been entered into by the Parties in respect of multiple Releases, then reference to SOW shall be a reference to the SOW which is applicable to the relevant Release; SOWs means all the SOW executed under this Contract; Sprint means the performance by each of the Parties of Planning, Activities, Showcase and Retrospective to enable the Supplier to deliver the Solution in order to Complete the specified Stories by the end of the Sprint Timebox; Sprint Plan means the plan that relates to a Sprint as agreed by the Parties; Sprint Timebox means a fixed period of time for the completion of a Sprint, the duration of which shall be as set out in the Calibration Deliverable;
compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;
quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.
Teletherapy means therapeutic irradiation in which the source of radiation is at a distance from the body.
Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.
Automated driving system means the same as that term is defined in Section 41-26-102.1.
Smoke detector means a device which detects particles or products of combustion other than heat.
Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.
Microsoft means Microsoft Corporation.
Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”
Core Curriculum Content Standards means the New Jersey Student Learning Standards.
Supplier of water means any person who owns or operates a public water system.