Different capacity definition

Different capacity means employment involving duties that do not fall within the same general occupational category as the employee’s regularly assigned duties.
Sample 1Sample 2Sample 3
Different capacity means in a different occupational category using the definitions in the Dictionary of Occupational Titles. Some occupations are much broader than others (i.e., clerical occupational titles are much broader than professional occupational titles).
Sample 1

Examples of Different capacity in a sentence

  • Different capacity of vessel may be acceptable provided that the proposed total carrying capacity is capable of meeting the passenger demand.

  • Different capacity means employment that does not fall within the same general occupational category as regularly assigned duties.

  • Associated to the same root part number, a component may have several variants, including: • Different speed grade.• Different capacity (e.g., 512 Mb, 1 Gb, and 2 Gb).• Different data bus (e.g., with 8- or 16-bit).

  • Different capacity constraints can have different implications for different groups.

  • Using RedPoint revenue projections and assuming only 20% of capacity is sold on a short term basis, ElecLink estimates the impact of those sensitivities on the project’s internal rate of return: • Lower gas price: -0.2%; • Different capacity mix in France and GB: -1.7%; • No carbon price support in Great Britain: -1.2%; • Higher level interconnection: -0.4%.

  • Different capacity building on-job and off-job training was conducted locally and at regional level.

  • Mr.Czesak (outgoing president of FOPA) was instrumental in acquiring this item via a silent auction.

  • Different capacity development strategies should be applied for different groups of stakeholders: on-the–job support and twinning arrangements are highly relevant in relation to technical staff; high-level policy formulators and decision-makers need to be incentivized through participation in international symposia or international workshops.

  • In terms of compatibility, always consult the motherboard user guide and consider the following general guidelines:  The DlMM format must match the motherboard (for example, you cannot install DDR modules in DDR2 slots) Different capacity modules can be installed, with the exception of Rambus or multichannel configurations.

  • Different capacity and commodity charges are proposed for big consumers (more than 10,4 TWh/y) and for smaller consumers.4.1.3.2 DiscriminationFor this analysis, the Agency defines ‘discrimination’ as ‘applying different rules to comparable situations or the same rule to different situations’.

Related to Different capacity

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. Day-ahead Congestion Price: “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market. Day-ahead Energy Market:

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Nameplate Capacity Rating means the maximum capacity of the Facility as stated by the manufacturer, expressed in kW, which shall not exceed 10,000 kW.