Defective Meter definition

Defective Meter means a meter whose condition is impairing service to a customer or a meter that has failed the requirements of Sections 500.170, 500.180, 500.190, 500.200, 500.210, 500.220, or 500.230.
Defective Meter means a meter whose condition is impairing service to a customer or a meter that has failed the requirements of Sections 501.170, 501.180, 501.190, 501.200, 501.210, 501.220 or 501.230500.170, 500.180, 500.190,

Examples of Defective Meter in a sentence

  • Defective Meter: Where the Water Department has determined the water meter to be defective, the Revenue Department shall determine the quantity of water used based on the usage for the periods prior to the meter becoming defective or by the type of premises and meter size.

  • Shri Jena cited the following as major reasons of high AT&C loss in CESU.- 86% Consumers are billed based on meter reading- Defective Meter cases are 2,04, 431 out of total 14,91,538 consumers- Suppressed Meter Reading cases are on rising trend.

  • In view of the requirement under Section 7 of the Arbitration Act, an arbitration agreement has to be in writing and there cannot be an oral agreement to arbitrate.

  • Uniquely Defective Meter – A meter selected for random sampling with unusable test results, including meters with broken covers, missing test data, accuracy performance characteristics greater than + 5% resulting from unique physical experience or unique electrical experience, and is not representative of other in- service meters in its HMG.

  • Short-billing arising out of Defective Meter Meter is to be tested with Accucheck / Electronic Reference Standard (ERS) Meter at site and % Error is to be arrived at and billed for the period when the meter was defective.

  • Defective Meter Set - If a Meter Set ceases to register, Superior will estimate the volume of Gas delivered to the Customer according to the procedures set out in Section 11 (Back Billing).3.

  • And limiting LT extension under this mechanism maximum upto 6 span (180 Meters)• Revision of smart Meter Rent to Rs.80 per month (if not permitted under CAPEX) and recovery may be permitted for 90 months instead of 60 months.• Billing with Defective Meter.

  • Other properties, that guarantee that the measure behaves within certain usual, convenient parameters, we refer to as technical properties.

  • The respondent has further asserted that the software issues are only for the billing matters and not on the issue with Meter and the respondent stated that they have not received any call on the subject of a Defective Meter in service or any letter addressed claiming Meter defective till the 24.2.2021 billing period.

  • Report on all irregularities found (Defective, Meter Taken Off, Cannot Find, Meter Read, and Not Reads).

Related to Defective Meter

  • Defective has the meaning set forth in Section 12.1A.

  • Nonconforming lot means a lot that met dimensional requirements of the applicable master program at the time of its establishment but now contains less than the required width, depth or area due to subsequent changes to the master program.

  • Defective Product has the meaning set forth in Section 5.2.

  • Defective Work means (a) Work that is unsatisfactory, deficient or damaged, does not conform to the Contract Documents, or does not meet the requirements of any inspection, test or approval, or (b) Work associated with punch list items that the Contractor fails to complete within a reasonable time after issuance of the punch list by the Project Manager.

  • Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.

  • Nonconforming Goods means only the following: (i) product shipped is different than identified in Buyer's purchase order; or (ii) product's label or packaging incorrectly identifies its contents.

  • Defective Goods means Goods of an inferior quality or which are otherwise inconsistent with this Contract.

  • Nonconformity or “Nonconformities” means any failure or failures of the Software to conform to the requirements of this Contract, including any applicable Documentation.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Nonconforming sign means a sign or sign structure, other than a nonstandard sign or a sign that is erected and maintained in a business area along a scenic byway prior to the designation as a scenic byway, that satisfies 1 of the following:

  • Nonconforming use means a use of land that:

  • Corrective Measure The contractor shall repair any deficiencies to meet the performance guideline within warranty period.

  • Defective Mortgage Loan Any Mortgage Loan which is required to be repurchased pursuant to Section 2.02 or 2.03.

  • Latent Defect means a defect, inherently lying within the material or arising out of design deficiency, which do not manifest themselves and/or was not reasonably discoverable during Defect Liability period.

  • Respiratory protective equipment means an apparatus, such as a respirator, used to reduce an individual's intake of airborne radioactive materials.

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Mentally defective means that a person suffers from a mental disease or defect which renders the person temporarily or permanently incapable of appraising the nature of his or her conduct. S.C. Code Ann. §

  • Unsuitable material means material other than suitable material and shall comprise:

  • SKU means stock keeping unit.

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Minor defect means a defect which is not a Major Defect.

  • Goods Specification means any specification for the Goods, including any related plans and drawings, as set out in the Order or otherwise agreed in writing by Get Living and the Supplier;

  • smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Punch List Items means such items (i) as are reasonably necessary or appropriate to fully complete the construction, equipping and furnishing of the Hotel in accordance with this Contract and (ii) that, unless otherwise agreed by Buyer in its sole discretion, (a) individually and in the aggregate do not and will not prohibit, cause a delay in or otherwise adversely affect, under applicable Legal Requirements, the Franchise Agreement or otherwise, the opening of the Hotel for business to the public or the continued occupancy and operation of the Hotel as contemplated under the Brand and (b) may be corrected or completed, subject to delays caused by Force Majeure, within not more than sixty (60) days.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.