Data Logging definition

Data Logging means the recording of data over time using an electronic device.

Examples of Data Logging in a sentence

  • Data Logging Radio Channel BER Check 6 hours X14 sites X 4 quarters = Radio Channel SIAD Check 336 hours per year Combiner Cavity Alignment Microwave Osc.

  • Data Logging Radio Channel BER Check Radio Channel SIAD Check Combiner Cavity Alignment Microwave Osc.

  • If an asterisk (*) character is flashing just below the battery symbol, this indicates that Auto Data Logging is switched on.

  • The only exception to this is if you have activated the Automatic Data Logging feature.

  • Auto Data Logging will also be cancelled if you switch the Meter off.

  • The Service Provider has agreed to the provision of [Leak Detection and Data Logging for Water Reticulation in the Port of Durban for a Period of Thirty Six (36) Months] which Services [the Deliverables] to be performed by the Service Provider are detailed in the Service Provider’s written proposal to Transnet [dated …………] which is incorporated herein by reference.

  • Data Logging/ Plant Monitoring system must include the parameters as mentioned at Annexure-B.

  • Data Logging Provision for Project control and monitoring, time and date stamped system data logs for analysis computer for data monitoring, metering and instrumentation for display of systems parameters and status indication to be provided.

  • To remind you that Auto Data Logging is switched on, an asterisk (*) character will flash on and off just below the battery symbol on all the main reading screens.

  • You can cancel Auto Data Logging at any time by going back into the screen above and setting the Status to OFF.

Related to Data Logging

  • Data Log means a complete record of all Data Interchanged representing the Messages and their Associated Data between the parties;

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • data user means a natural or legal person who has lawful access to certain personal or non-personal data and is authorised to use that data for commercial or non-commercial purposes;

  • Ignition cycle download means the number (count) of power mode cycles as determined by the EDR ECU at the time when the data was downloaded since the first use of the EDR.

  • Data Processing shall have the same meaning as set out in the DPA.