Cutting operation definition

Cutting operation means the cutting of timber for commercial purposes from 10 acres or more of land on which loblolly pine (Pinus taeda), shortleaf pine (Pinus echinata), pond pine (Pinus serotina) or yellow-poplar (Liriodendron tulipifera), singly or together occur and constitute 25 percent or more of the live trees on each acre.
Sample 1
Cutting operation means the cutting of timber for commercial purposes from 10 acres or more of
Sample 1Sample 2

Examples of Cutting operation in a sentence

  • The PM (filterable) emissions from the Sawing Operations (Bar Cutting operation) shall be controlled by a baghouse and shall not exceed 0.0052 gr/dscf.

  • D.7.9 Testing Requirements [326 IAC 2-1.1-11]Not later than 60 days after achieving maximum production capacity, but no later than 180 days after initial startup of the Coil and Scrap Cutting operation (CC-1), the Permittee shall perform PM and PM10 testing on its baghouse to demonstrate compliance with its particulate emission limits in Condition D.7.3(b), utilizing methods as approved by the Commissioner.

  • Cutting operation is performed using conventional Milling machine.

  • Introduction In October of 2012, President Tripathi in his annual State of the University Address charged Provost Zukoski to lead a campus-wide effort to formulate an implementation plan for the next phase of UB 2020.

  • The PM (filterable) emissions from the Sawing Operation (Bar Cutting operation) shall be controlled by a baghouse and shall not exceed 0.0052 gr/dscf.

  • Due to this confusion are created and hence to reduce it different methods used were categorized undertheheading, Cutting operation, Machine operation, Welding operation & Assembly operation and Finishing operation.

  • Cutting operation carried out on work piece with 20 mm length and single pass were obtained in each experimental run.

  • These tests shall be repeated at least once every 2.5 years from the date of the most recent valid compliance Not later than 60 days after achieving maximum production capacity, but no later than 180 days after initial startup of the Coil and Scrap Cutting operation (CC-1), the Permittee shall perform PM and PM10 testing on its baghouse to demonstrate compliance with its particulate emission limits in Condition D.7.3(b), utilizing methods as approved by the Commissioner.

  • Cutting operation carried out on work piece with straight profile the work piece was carefully clamped on work table [7].

  • Cutting operation on an item of equipment of the PHEBUS experimental reactor at Cadarache ASN asked CEA to inform it rapidly of its strategy concerning the future of this BNI, so that the regulation and safety proce- dures with regard to either decommissioning or a modification of the installation to allow new activities could be initiated.

Related to Cutting operation

  • Farming operation means raising, cultivating, propagating, fattening, grazing, or any other farming, livestock, or aquacultural operation.

  • Mining operation means any operations undertaken for the purpose of winning any mineral as defined in section 3 (d) of Mines and Minerals (Development and Regulation) Act, 1957.

  • Drilling operations means the drilling of an oil and gas well and the production and completion operations ensuing from the drilling which require entry upon the surface estate and which were commenced after June 30, 1979, and oil and gas geophysical and seismograph exploration activities commenced after June 30, 1983.

  • Farm operation means any activity conducted solely or primarily for the production of one or more agricultural products or commodities, including timber, for sale or home use, and customarily producing such products or commodities in sufficient quantity to be capable of contributing materially to the operator's support.

  • In operation means engaged in activity related to the primary design function of the source.

  • Salvage operation means any business, trade or industry engaged in whole or in part in salvaging or reclaiming any product or material, including but not limited to metals, chemicals, shipping containers or drums.

  • Mining Operations means every kind of work done by the Operator:

  • Animal feeding operation (“AFO”) means a lot or facility (other than an aquatic animal production facility) where animals have been, are, or will be stabled or confined and fed or maintained for a total of 45 days or more in any 12-month period, and crops, vegetation, forage growth, or post-harvest residues are not sustained in the normal growing season over any portion of the lot or facility [40 CFR § 122.23(b)(1)].

  • Railway Operation means the construction and operation under this Agreement of the relevant Railway and associated access roads and Additional Infrastructure (if any) within the relevant Railway Corridor and of the associated Lateral Access Roads, in accordance with approved proposals;

  • The Works/Project means the works to be executed or done under this contract.

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • Production Operations means all operations conducted for the purpose of producing Petroleum from the Development Area after the commencement of production from the Development Area including the operation and maintenance of all necessary facilities therefor.

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Generation Operations Center means the location of Buyer’s real-time operations personnel.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Commissioning means the process for determining the need for and for obtaining the supply of healthcare and related services by the Trust within available resources.

  • Outdoor cultivation means the cultivation of mature cannabis without the use of artificial lighting or light deprivation in the canopy area at any point in time. Artificial lighting is permissible only to maintain immature plants outside the canopy area.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Project means the goods or Services described in the Signature Document or a Work Order of this Contract.

  • Business operations means engaging in commerce in any form, including by acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Project Location means the points or areas designated as such on Exhibit A and located on the ground by reference to points, stations, natural land features, improvements, or area boundary signs. STATE means the Oregon Department of Forestry, State Forester, or a duly Authorized Representative of the State Forester.

  • Area of operation means the area from which the persons can be admitted as members of the Bank.

  • Project Water means water made available for delivery to the contractors by project conservation facilities and the transportation facilities included in the System.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.