Cutting Master definition

Cutting Master. > "Settings" in the "File" menu of Illustrator. • Make the following settings: Scaling: 100%; Rotate: None; Weed Border: OFF, Tiling: OFF; Matrix Copy (optional): OFF; Use Document Origin (optional): ON • Compare the print with the Illustrator document. Load the print in the plotter so that the documents bottom left registration ▇▇▇▇ (Point 1, Origin) is at the plotter's bottom right when the plotter is viewed from the front. • If the shape, length or thickness is inconsistent with any of the plotter settings, change the settings of the created registration marks to ensure consistency. • Read the registration marks with the plotter. • When requested by the plotter, enter the distance between the registration marks. • Cutting starts when data is output from the Cutting Master. • To print and cut in alignment Printing and cutting in alignment means arranging multiple duplicated printed images bounded by registration marks and cutting while reading the registration marks sequentially. This process is used for the mass production of stickers and suchlike. To print and cut in alignment, a plotter that can handle print and cut in alignment applications is required.
View Source
Cutting Master. > "Output to Plotter" in the Illustrator "File" menu outputs the drawing in the Illustrator document to the plotter. The output position will be to the right of and above the plotter origin. The drawing is output so that if we imagine the smallest possible rectangle enclosing the entire drawing, the bottom left-hand point of the rectangle corresponds to the plotter origin. The output size will be the size of the drawing in the Illustrator document (provided that "Use Document Origin [Default: OFF]," "Rotate," or "Scaling" have not been altered). • To output alphanumeric characters Only alphanumeric characters that can be converted to outlines can be output using this plug-in, and only the outlines are output. Select the character to be output in the Illustrator document, and use "Create Outlines" in the Illustrator "Type" menu. The outlines created can be output in the same way as other objects. • To change the output position The output position can be changed by specifying the desired values in the "Offset" boxes on the Cutting Master window Options page. Note that drawings cannot be output to the left of or below the plotter origin. Even if negative offset values are specified, only the area of the figure to the right of and above the plotter origin will be output. • To change the output size The output size can be changed by entering different numeric values for the "Scaling" function available in the Cutting Master window. • To rotate the output The drawing to be output can be rotated by using the "Rotate" function available in the Cutting Master window. The rotated drawing will always be output to the right of and above the plotter origin. The drawing is output so that the bottom left-hand point of the rectangle enclosing the entire drawing after rotation corresponds to the plotter origin (provided "Use Document Origin" has not been altered). • To output outlines with thick lines Outlines with thick lines can be created using the following procedure. (Save the document first.)
View Source
Cutting Master. > "Settings" in the "File" menu of Illustrator. • Check the box for "Use Registration Marks" on the "Registration Marks" page in the displayed Cutting Master window. • Load the print created above ready in the plotter. Load the print in the direction indicated in the drawing of the plotter shown in the Cutting Master window. • Move the pen (cutter) within the range where the bottom left of the registration ▇▇▇▇ is readable. The readable range is the green section in the drawing of the plotter in the Cutting Master window. • When the document is output, the registration marks are read, and then the printout is cut. If the registration marks cannot be read, retry reading while pressing the "Correct Axis" button of the plotter. Cutting is started after the registration marks are successfully read. <When using a plotter that doesn't support the Registration ▇▇▇▇ Control command*>
View Source

Examples of Cutting Master in a sentence

  • Use Cutting Master 3 to output data that is created in Adobe® Illustrator® or CorelDRAW®.

  • The objects not meeting the conditions of this setting are not displayed in the "Output Selection" list of the Cutting Master Window (Output Settings Page).

  • For more information on Cutting Master 3, see the User's Manual provided with Cutting Master 3.

  • This function should be used when registration marks are not created using the registration ▇▇▇▇ creation function in Cutting Master, or when you wish to change the distance between the registration marks.

  • Load the medium by referring to the drawing of a plotter shown in the Cutting Master window.

  • When registration marks are created using the registration ▇▇▇▇ creation function in the Cutting Master, the shape, length and thickness of the created registration marks are sent to the plotter.

  • The display varies depending on whether you choose "Flatbed Type" or "Friction Feed Type" in the Cutting Master Window (Plotter Settings Page).

  • Cutting Master is an output plug-in that enables the use of a Graphtec cutting plotter from within Adobe Illustrator on a Windows-based PC.

Related to Cutting Master

  • Soil texture means proportion by weight of sand, silt, and clay in a soil.

  • Drywell means an unlined or partially lined underground pit (regardless of geometry) into which drainage from roofs, basement floors, water softeners or other non-wastewater sources is discharged and from which the liquid seeps into the surrounding soil.

  • obsrvd_agnt_cd ;"count erparty_identifier";"entty_rl";"cntrct_id";"instrmnt_id";" reporting_reference_date" Alpha-numeric Semicolon-separated string of all column names. Field names are put in double quotation marks. 1 reporting_agent_identifier Variable characters (60) 60 identifier domain 2 obsrvd_agnt_cd Variable characters (60) 60 identifier domain 3 counterparty_identifier Variable characters (60) 60 identifier domain 4 entty_rl Variable characters (25) 25 counterparty-instrument role type 5 cntrct_id Variable characters (60) 60 identifier domain 6 instrmnt_id Variable characters (60) 60 identifier domain 7 reporting_reference_date Date reporting reference date

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.