Configured definition

Configured to use large-scale drift-nets means having on board assembled gear that collectively would allow the vessel to deploy and retrieve large-scale driftnets.
View Source
Configured means features and functionality are limited by parameters included in the product, but does not change the underlying code of the solution such as Microsoft Word.
View Source
Configured. As"each"network"is"different,"a"suitable"IP address"on"the"network"must"be"assigned"to"the"device." This"IP"address"helps"to"configure,"manage"and"monitor"the"device by"using"Web"Interface,"SNMP,"or"Telnet/CLI."The"decvei"can"be"assigned"a"static/dynamic/auto "IP"address."When"set"to static ," the" user" has" to" set" the" IP" address" manually;" if" set"to" dynamic ," the" IP" address" is" obtained" dynamically" from" the Dynamic"Host"Configuration"Protocol"(DHCP)"server. By"default,"the"device"IP"Address"is"set"to"169.254.128.132."In"case"of"QB-825-LNK-50,"the"factory"configured"IP"address"for End"Point"B"is"169.254.128.131."If"required,"the"end"user"can"change"it"to"the"default"IP"address. : MP-8160-CPE-A100, MP-825-CPE-50, and QB-825-EPR-50 device does not have a Serial Port. However, the user has the flexibility to configure, manage and monitor th e device through command mode via Telnet.
View Source

Examples of Configured in a sentence

  • Configured Individual User Any individual user (regardless of role or permissions) who has access to the Service with an active account.

  • Outputs / Deliverables Acceptance Criteria [only] for Deliverables Configured System Work package assumptions: ▪ ▇▇▇▇▇ provides guidance for configuration options available within the Tyler software.

  • The execution, delivery and performance by Buyers of this Agreement is within Buyers’ powers.

  • Configured with the appropriate and most recently released (relative to the date of installation) production version of the IoT Equipment’s firmware.

  • A.4.c below (Coordination as to Services), Applied shall issue (or make available by electronic means) the Applied Configured BOM as part of the Authorized Demand Signal.

  • Configured to ensure all services not needed to fulfill the technical function specified under the Contract are disabled, and all Internet Protocol ports, except those needed by enabled services on the IoT Equipment, are closed.

  • If Applied elects to provide an Applied Configured BOM pursuant to Section 2.1.5.

  • Configured to ensure manufacturer’s default login credentials (e.g. login ID and password) have been changed to a non-trivial username and appropriately strong password.

  • Configured with a valid IP address within the address range specified under this Contract.

  • Configured whole unit replacements may require additional time for preparation and delivery.


More Definitions of Configured

Configured to"65535 ."Configure"the"start"and"end"port"as"desired. : Care should be taken to avoid overlap of Dynamic Por t range and Static Port range.
View Source
Configured by"using"SNMP."These"objectsc"orrespond"to"most of" the" settings" and" statistics" that" are" available" w ith" other" management" interfaces." The" MIB" can" be" ope ▇▇▇" with" any" text editor,"such"as"Microsoft"Word,"Notepad,"or"WordPad .
View Source